This tutorial will take you every single step of the way through installing Ubuntu 7.04 (Feisty Fawn) using Parallels for OS X. In other words, even your parents should be able to follow along. هذا البرنامج التعليمي سوف تتخذ لكم كل واحد خطوة على الطريق من خلال تركيب أوبونتو 7.04 (Feisty الظبي) باستخدام المتوازيات لنظام التشغيل العاشر وبعبارة أخرى ، والديك ، بل ينبغي أن تكون قادرة على متابعة طول.
NOTE: this tutorial is for people who are using Parallels Version 2.x. ملاحظة : هذا هو البرنامج التعليمي للأشخاص الذين يستخدمون النسخة المتوازيات 2.x. An up-to-date version of this tutorial (for وهو مستكملة نسخة من هذا البرنامج التعليمي (لل Parallels Desktop 3.0 سطح المكتب يوازي 3.0 ) can be found (يمكن الاطلاع على here هنا .
NOTE 2: if you’re looking for help installing Ubuntu 7.10 (Gutsy Gibbon) in Parallels, see ملاحظة 2 : إذا كنت تبحث عن مساعدة في تركيب أوبونتو 7.10 (طماع جيبون) في المتوازيات ، انظر this tutorial هذا البرنامج التعليمي .
1. Who this tutorial is for هذا البرنامج التعليمي الذي هو لل
2. Background خلفية
3. Setting up Parallels for Ubuntu إنشاء المتوازيات للأوبونتو
4. Running Ubuntu for the first time تشغيل أوبونتو لأول مرة
5. Tidying up, adding sound and increasing the screen resolution استخدمت ل، مضيفا السليمة وزيادة دقة الشاشة
Who this tutorial is for هذا البرنامج التعليمي الذي هو لل
This tutorial is for anyone with an Intel based Mac who is curious about Linux - specifically Ubuntu, and has about an hour to kill (not including the time it takes to download Ubuntu). هذا هو البرنامج التعليمي ليشمل أي شخص لديه على أساس ماك إنتل الذي هو الغريب عن لينكس -- أوبونتو على وجه التحديد ، ونحو ساعة لقتل (لا تشمل الوقت الذي يستغرقه لتحميل أوبونتو).
The steps and screenshots used for this tutorial are specific to Parallels Build 3188 (if you’re using a more recent version of Parallels, please see الخطوات لقطات الشاشة وتستخدم لهذا البرنامج التعليمي المتوازيات هي محددة لبناء 3188 (إذا كنت تستخدم النسخة الأخيرة أكثر من المتوازيات ، يرجى الرجوع إلى this tutorial instead بدلا من هذا البرنامج التعليمي ) running on a MacBook Pro w/ OS X (10.4.9). (على التوالي برو MacBook ث / نظام التشغيل العاشر (10.4.9). With that said, they will be nearly identical if you have a Mac Pro, Mac Mini, MacBook or any other Intel based Apple Mac. مع أن قال ، أنها ستكون متطابقة تقريبا إذا كان لديك ماك برو ، ماك ميني ، MacBook أو أي الأخرى القائمة على إنتل أبل ماكنتوش.
Ubuntu is a free, open source أوبونتو هي حرة ومفتوحة المصدر Linux-based المستندة إلى نظام لينوكس operating system with a clear focus on the user and usability (it should “Just Work”). نظام التشغيل مع تركيز واضح على المستخدم واستخدامها (ينبغي أن "العمل فقط"). When you finish your Ubuntu installation your system is immediately usable. عند انتهائك من حسابك أوبونتو تركيب النظام الخاص بك هي صالحة للاستعمال فورا. On the desktop you have a full set of business productivity applications, internet applications, drawing and graphics applications, and games. على سطح المكتب لديك مجموعة كاملة من تطبيقات الأعمال التجارية الإنتاجية ، وتطبيقات شبكة المعلومات ، ووضع الرسومات والتطبيقات والألعاب. For more information on Ubuntu, visit لمزيد من المعلومات حول أوبونتو ، زيارة http://www.ubuntu.com/ubuntu .
As you may have noticed, here at Simplehelp we often recommend software, and 90-something percent of the time that software is free. ربما لاحظتم ، نحن هنا في Simplehelp كثيرا ما يوصي البرمجيات ، وشيئا 90 في المئة من الوقت هو أن البرمجيات الحرة. Parallels isn’t free, but it really is worth the cost. الشبه ليس مجانيا ، لكنه حقا يستحق تلك التكلفة. It will allow you to run other operating systems (like Ubuntu) on your Mac - without having to worry about any of your OS X settings, documents or files being accidentally deleted. وسوف تسمح لك لتشغيل أنظمة تشغيل أخرى (مثل أوبونتو) على حسابك ماك -- من دون ان يهتم أي من نظام التشغيل الخاص بك العاشر إعدادات ، أو وثائق أو ملفات يتم حذف بطريق الخطأ. And if you don’t like Ubuntu you can trash it and carry on like it never happened. وإذا كنت لا تحب أوبونتو يمكنك القمامة وأنها تحمل على مثل هذه الخطوة لم تتم أبدا.
One other (major) benefit of using Parallels is that you run the other operating system (in this case Ubuntu) while OS X is running. واحدة أخرى (الرئيسية) باستخدام الاستفادة من المتوازيات هي أن تشغيل نظام التشغيل الأخرى (في هذه الحالة أوبونتو) في حين أن نظام التشغيل هو العاشر على التوالي. You don’t need to restart your computer each time you want to switch from OS X to Ubuntu and vice-versa. لست بحاجة إلى إعادة تشغيل الكمبيوتر في كل مرة تريد التحول من نظام التشغيل العاشر لأوبونتو والعكس بالعكس.
Read more about Parallels Desktop اقرأ المزيد عن المتوازيات سطح المكتب here هنا .
This tutorial would not have been made possible (or at least it would have taken me a lot longer) without the help of هذا البرنامج التعليمي لم يكن ممكنا (أو على الأقل أنها اتخذت يعد لي الكثير) من دون مساعدة Kent Bye كينت وداعا .
Before you start - make sure to download Ubuntu from قبل ان تبدأ -- تأكد من لتنزيل أوبونتو http://www.ubuntu.com/download . The file you’ll want to download (as of 4/27/07) is ubuntu-7.04-desktop-i386.iso . الملف سترغب في التحميل (اعتبارا من 4/27/07) هو أوبونتو - 7.04 - - i386.iso سطح المكتب. Also, make sure Parallels Desktop is installed. أيضا ، تأكد من المتوازيات هي تركيب سطح المكتب.
Setting up Parallels for Ubuntu إنشاء المتوازيات للأوبونتو
- If this is the first time you’re using Parallels, the Wizard will launch automatically. إذا كانت هذه هي المرة الأولى كنت تستخدم المتوازيات ، معالج سوف تبدأ تلقائيا. If it’s not the first time you’ve used Parallels, launch the Wizard by selecting New… اذا كان ليست المرة الأولى كنت قد استخدمت المتوازيات ، بدء معالج عن طريق اختيار الجديدة...
- Select Custom as the type of installation mode, and then Next to continue. اختر نوع مخصص حسب طريقة التركيب ، وبعد ذلك التالي للمتابعة.
- Choose Solaris as the OS Type: and Other Solaris as the OS Version: . اختيار نظام التشغيل سولاريس حيث النوع : وغيره من حيث نظام التشغيل سولاريس الإصدار :. No, that’s not a mistake. لا ، هذا ليس خطأ. At the time of this writing, Parallels build 3188 has some issues when it comes to installing Ubuntu 7.04. وفي وقت كتابة هذا التقرير ، المتوازيات 3188 بناء بعض القضايا عندما يتعلق الأمر بتركيب أوبونتو 7.04. Selecting Solaris as the OS will help you get around those issues, and in a later step you’ll be changing this setting anyway. اختيار نظام التشغيل سولاريس كما يساعدك على الحصول على حول هذه المسائل ، وفي خطوة لاحقة سوف يكون تغيير هذا الإعداد على أي حال. Click Next to continue. انقر فوق التالي للمتابعة.
- Here you’ll need to select the amount of RAM that will be dedicated to the guest operating system (Ubuntu). هنا ستحتاج إلى اختيار مبلغ من ذاكرة الوصول العشوائي التي ستكون مخصصة لنظام التشغيل الضيف (أوبونتو). If your Mac has 512MB of RAM, you’ll want to select 256MB or a bit less. إذا كان ماك قد 512MB من ذاكرة الوصول العشوائي ، you'll تريد لاختيار 256MB أو أقل قليلا. Below 128MB will make Ubuntu a bit slow. أدناه 128MB سيجعل أوبونتو بطيئة بعض الشيء. Because I have 2GB in my MacBook Pro, I’ve opted to dedicate 768MB to Ubuntu - and both OS X and Ubuntu run very quickly. لأنني في بلدي 2GB برو MacBook ، لقد اختارت لتكريس 768MB لأوبونتو -- وكلا من نظام التشغيل العاشر وتشغيل أوبونتو بسرعة كبيرة. After you’ve selected an amount, click Next to continue. NOTE: some users (scroll way down to see comments) have reported problems when opting for more than 512MB of RAM. وبعد اخترتها مبلغ ، انقر فوق التالي للمتابعة. ملاحظة : بعض المستخدمين (طريقة التمرير الى انظر التعليقات) عن مشاكل عند اختيار أكثر من 512MB من ذاكرة الوصول العشوائي. You may want to set it to 512 or less now - you can always increase it later. قد ترغب في وضع ل512 أو أقل الآن -- يمكنك دائما زيادة في وقت لاحق.
- Select Create a new hard disk image and click Next to continue. اختر إنشاء صورة القرص الثابت الجديد وانقر فوق التالي للمتابعة.
- Now you’ll need to set the size of the “hard drive” that Ubuntu will use. الآن ستحتاج إلى حجم مجموعة من "القرص الصلب" التي سوف تستخدم أوبونتو. It might be possible to select less than a gigabyte (1024) and still install Ubuntu, but there would be very little room left for anything else. قد يكون من الممكن لاختيار أقل من جيجابايت (1024) لا تزال وتثبيت أوبونتو ، ولكن لن يكون هناك مجالا كبيرا لترك أي شيء آخر. I would suggest 2 or more gigs (2048) at a minimum. أود أن أقترح 2 أو أكثر من العربات (2048) كحد أدنى.
Review the differences between Expanding and Plain as a disk format. استعراض الاختلافات بين توسيع وسهل كما شكل القرص. Parallels suggests using Expanding, and since I’ve only noticed a small difference in performance between the two, I would suggest it as well. أوجه الشبه وتقترح توسيع نطاق استخدام ، ومنذ ان كنت صغيرة فقط لاحظ الفرق في الأداء بين البلدين ، واعتقد ان الامر كذلك. Either way, don’t stress out over this decision too much - you can convert from one format to the other, using Parallels Image Tool , if you ever need to. وفي كلتا الحالتين ، لا أشدد على مدى هذا القرار أكثر مما ينبغي -- يمكنك من تحويل شكل واحد إلى أخرى ، المتوازيات الصورة باستخدام أداة ، إذا كنت من أي وقت مضى الحاجة ل. Click Next when you’re ready to continue. انقر فوق التالي عندما تكون مستعدا لمواصلة.
- Select Shared Networking and then click Next . اختيار الشبكات المشتركة وثم انقر فوق التالي.
- Give your virtual machine a name - pretty much anything is fine, so go with something descriptive. قم اسم آلة افتراضية -- الى حد كبير أي شيء على ما يرام ، حتى يذهب مع وصفي شيء. You may also want to click the More Options link if you want to change the default location for the virtual machine files (generally not necessary). يمكنك أيضا تريد المزيد من الخيارات انقر على وصلة إذا كنت تريد تغيير الافتراضي موقع آلة افتراضية للملفات (عموما ليس من الضروري). You can also remove the check from the box labeled Create icon on Desktop if you like to keep an un-cluttered desktop. يمكنك أيضا إزالة التحقق من المربع وصف إنشاء أيقونة على سطح المكتب إذا كنت تريد إبقاء برنامج الأمم المتحدة للتشوش سطح المكتب. Once again, click Next . مرة أخرى ، انقر فوق التالي.
- Click More Options and select ISO image . انقر فوق المزيد من الخيارات واختيار صورة المنظمة الدولية للتوحيد القياسي. Then click the Choose… button and navigate to your Ubuntu .iso file (ubuntu-7.04-desktop-i386.iso). ثم انقر على زر اختر... وانتقل إلى أوبونتو الخاصة بك. ملف المنظمة الدولية للتوحيد القياسي (أوبونتو - 7.04 - - i386.iso سطح المكتب). Make sure Start Other Solaris installation is checked, and then click Finish . تأكد من تركيب البداية أخرى سولاريس هو فحص ، ثم انقر فوق إنهاء.

click to enlarge اضغط هنا لتكبير الصورة

click to enlarge اضغط هنا لتكبير الصورة

click to enlarge اضغط هنا لتكبير الصورة

click to enlarge اضغط هنا لتكبير الصورة

click to enlarge اضغط هنا لتكبير الصورة

click to enlarge اضغط هنا لتكبير الصورة

click to enlarge اضغط هنا لتكبير الصورة

click to enlarge اضغط هنا لتكبير الصورة
Running Ubuntu for the first time تشغيل أوبونتو لأول مرة
- Ubuntu will now boot for the first time. أوبونتو الآن الحذاء لأول مرة. When you’re presented with the boot: prompt, enter in the following: live vga=790 and then hit ENTER (on your keyboard). عندما كنت قدمت مع الحذاء : السريعة ، وتدخل في ما يلي : تجهيز مرئي يعيش = 790 وبعد ذلك ضرب مفتاح الإدخال (على لوحة المفاتيح).
- Watch the pretty line… مشاهدة جميلة خط...
- And here you are. وانت هنا. Because the .iso file you downloaded is a “Live” image, you can actually play around with Ubuntu right now. لأن. ايزو هل تم تحميل الملف هو "عيش" صورة ، يمكنك فعلا اللعب مع أوبونتو حول الحق الآن. You won’t have sound (we’ll fix this later) and you probably won’t be connected to the Internet (again, we’ll fix it later) so lets just get on with the installation. انكم لن سليمة (سنقوم بتحديد وقت لاحق من هذا) ولكم ربما لن تكون متصلة بشبكة الإنترنت (مرة أخرى ، سنقوم اصلاحها في وقت لاحق) حتى يسمح فقط مع الحصول على التثبيت. Double-click the Install icon on your Ubuntu desktop. انقر نقرا مزدوجا فوق تثبيت أيقونة على سطح المكتب الخاص بك أوبونتو.
- Select your language of choice and then click the Forward button. اختر لغتك المفضلة وثم انقر على زر التالي.
- Choose your location from the drop-down list, and then click Forward . اختر موقع من القائمة المنسدلة ، ثم انقر فوق التالي.
- Select your keyboard layout, and you guessed it, click Forward . اختر تصميم لوحة المفاتيح ، وخمنت انها لكم ، انقر فوق التالي.
- Leave the default options selected ( Guided and SCSI1 and then click Forward . ترك الخيارات الافتراضية المختارة (وتسترشد SCSI1 ثم انقر فوق التالي.
- Nothing to import, so click Forward لاستيراد أي شيء ، حتى انقر فوق إعادة توجيه
- Enter your Name , the name you wish to use to login , a password and whatever you want to call your “Ubuntu computer” in the spaces provided. أدخل الاسم ، اسم كنت ترغب في استخدام لتسجيل الدخول ، ومهما كانت كلمة السر التي تريد دعوة الخاص بك "أوبونتو الكمبيوتر" في الأماكن المنصوص عليها. Once again, click Forward . مرة أخرى ، انقر فوق التالي.
- And now finally, click the Install button. والآن أخيرا ، انقر على زر تثبيت.
- Go get a cup of coffee or your beverage of choice. اذهب وحقق فنجانا من القهوة أو المشروبات الخاصة بك الاختيار. This can take a while. وهذا يمكن أن يستغرق بعض الوقت.
- When the installation is complete, choose Restart now . عند تركيب كاملة ، أن تختار إعادة التشغيل الآن.
Don’t be at all surprised if Ubuntu doesn’t actually shut down properly. لا تكون مفاجأة على الاطلاق اذا أوبونتو لا فعلا أغلقت على النحو الصحيح. I’ve actually yet to have it restart on it’s own, it always ‘hangs’ at a blank black screen. لقد قمت فعلا تصل بعد الى استئناف ذلك على أنها ذاتها ، دائما 'معلق' في شاشة فارغة سوداء. If this happens to you, use the Stop Virtual Machine button in the upper-right corner of Parallels. وإذا كان هذا يحدث لكم ، اوقفوا استخدام الآلة الافتراضية على زر في الزاوية اليمنى العليا من المتوازيات. The red square one. الأحمر مربع واحد.

click to enlarge اضغط هنا لتكبير الصورة

click to enlarge اضغط هنا لتكبير الصورة

click to enlarge اضغط هنا لتكبير الصورة

click to enlarge اضغط هنا لتكبير الصورة

click to enlarge اضغط هنا لتكبير الصورة

click to enlarge اضغط هنا لتكبير الصورة

click to enlarge اضغط هنا لتكبير الصورة

click to enlarge اضغط هنا لتكبير الصورة

click to enlarge اضغط هنا لتكبير الصورة

click to enlarge اضغط هنا لتكبير الصورة
Update: a number of folks have noted that they get ’stuck’ at this stage, particularly during hardware detection. تحديث : عدد من الناس قد لاحظ أن تحصل 'تمسك' في هذه المرحلة ، ولا سيما خلال أجهزة الكشف. Yesterday, while installing Ubuntu on a friends MacBook Pro, I encountered the same error - it hangs at “piix Intel 82801BA IDE”. أمس ، في حين تركيب أوبونتو على برو MacBook الأصدقاء ، أنا واجهت نفس خطأ -- أنها معلقة في "piix إنتل 82801BA بيئة تطوير متكاملة". The solution, in my case, was to power off the virtual machine (the red square icon in the right column of Parallels Desktop), and power it back on (the green arrow). الحل ، في حالتي ، كان لسلطة قبالة آلة افتراضية (الحمراء أيقونة مربع في العمود الأيمن من المتوازيات سطح المكتب) ، والسلطة على العودة (السهم الأخضر). The 2nd time I tried to install Ubuntu, it went right through with no problems. وقد حاولت 2nd الوقت لتثبيت أوبونتو ، أنها ذهبت مع الحق من خلال أي مشاكل. I made no changes to any of the configurations (above steps), I simply “tried again” - and it worked. أنا لم يقدم على أي تغيير في أي من التشكيلات (الخطوات المذكورة أعلاه) ، أنا ببساطة "حاول مرة أخرى" -- وأنه يعمل.

click to enlarge اضغط هنا لتكبير الصورة
Tidying up and adding sound استخدمت لواضاف سليم
- Back at the Parallels configuration window for your Ubuntu machine, click the Configuration “link”. العودة المتوازيات في التكوين الخاص بك نافذة لأوبونتو آلة ، انقر فوق التشكيل "وصلة".
- Now it’s time to set things straight. الآن حان الوقت لوضع الامور في نصابها الصحيح. Make sure that Options is selected from the Resource list in the left side of the window. تأكد من أن الخيارات ويتم اختيار من الموارد قائمة في الجانب الأيسر من النافذة. On the right side, change your OS Type: from Solaris to Linux and the OS Version: from Other Solaris to Other Linux kernel 2.6 . على الجانب الأيمن ، وتغيير نوع نظام التشغيل الخاص بك : سولاريس من لينكس ونظام التشغيل الإصدار : من غيره من سولاريس لالأخرى نواة لينكس 2.6.
- Select CD/DVD-ROM 1 from the Resource list, and then change the Emulation from Use image file to Use CD/DVD-ROM . حدد مؤتمر نزع السلاح / دي في دي مدمج 1 من الموارد القائمة ، وبعد ذلك تغيير المحاكاة من استخدام ملف الصورة الى استخدام مؤتمر نزع السلاح / دي في دي مدمج.
Then click the Add… button in the lower left corner. ثم انقر على زر أضف... في الزاوية السفلى اليسرى.
- Select Sound and then click Next واختيار الصوت ثم انقر فوق التالي
- Leave the defaults selected, and then click Finish . ترك اختيار الإعدادات الافتراضية ، ثم انقر فوق إنهاء.
- Back at your Ubuntu configuration window, click OK . العودة أوبونتو التكوين الخاص بك في نافذة ، انقر فوق موافق.
- Alright, it’s go time. حسنا ، انها تذهب الوقت. Start up Ubuntu by click the Start Virtual Machine button (the green arrow in the right column). بدء تشغيل أوبونتو جانب انقر فوق ابدأ الافتراضي للماكينات زر (السهم الأخضر في العمود الأيسر).
- Don’t be at all surprised or alarmed if you see an error message (ACPI: Unable to locate RSDP) flash on your screen. لا تكون مفاجأة على الاطلاق أو بالانزعاج إذا رأيت رسالة خطأ (ACPI : تعذر تحديد موقع RSDP) ومضة على الشاشة. It’sa known issue. انها مسألة معروفة.
- Again, do not be the least bit surprised if you find yourself staring at a blank, black window. مرة أخرى ، لا يكون أقل قليلا بالدهشة اذا وجدت نفسك في يحدق بيضاء ، سوداء النافذة. Just wait a few more seconds.. مجرد الانتظار لبضعة ثوان أكثر..
- … and you’ll get to the login window! ... وستحصل على نافذة لتسجيل الدخول! Enter your user name in the space provided and hit enter (on your keyboard). ادخل اسم المستخدم في الفراغ وضرب دخول (على لوحة المفاتيح).
- Enter your password and again click enter. ادخال كلمة السر مرة أخرى وانقر فوق دخول.
- That’s it - you’re done! هذا كل شيء -- أنت القيام به! Well almost. حسنا تقريبا. Select the Internet status icon in the upper-right corner of your Ubuntu desktop, and choose Wired Network . اختر شبكة الإنترنت مركز أيقونة في الزاوية اليمنى العليا من سطح المكتب الخاص بك أوبونتو ، واختيار شبكة الاتصال السلكي. Assuming your Mac is online, Ubuntu will now be connected to the Internet as well. وبافتراض الخاصة بك على الانترنت هو ماك ، أوبونتو الآن سوف تكون متصلة بشبكة الإنترنت أيضا. Have fun! وقد متعة! If you want to increase Ubuntu’s screen resolution, please see إذا كنت تريد زيادة أوبونتو شاشة القرار ، يرجى الرجوع إلى this post هذه وظيفة .

click to enlarge اضغط هنا لتكبير الصورة

click to enlarge اضغط هنا لتكبير الصورة

click to enlarge اضغط هنا لتكبير الصورة

click to enlarge اضغط هنا لتكبير الصورة

click to enlarge اضغط هنا لتكبير الصورة

click to enlarge اضغط هنا لتكبير الصورة

click to enlarge اضغط هنا لتكبير الصورة

click to enlarge اضغط هنا لتكبير الصورة

click to enlarge اضغط هنا لتكبير الصورة

click to enlarge اضغط هنا لتكبير الصورة

click to enlarge اضغط هنا لتكبير الصورة





















{ 59 trackbacks } (59) تركبكس
{ 108 comments… read them below or (108 التعليقات... قراءتها أو أقل add one إضافة واحد } )
Dude. مهندم. This is exactly what I was looking for. هذا هو بالضبط ما كنت أبحث. I have had issues getting Ubuntu installed in Parallels on OS-X 10.4.9. لقد كان الحصول على القضايا أوبونتو تركيبها في المتوازيات على السراج العاشر 10.4.9.
Khurt - glad it helped Khurt -- سعيد ساعد
Doesn’t work for me. لا عمل لي. It stays black forever for me. ومن يبقى إلى الأبد سوداء بالنسبة لي.
Wim - ويم --
At which stage does it stay “black forever”- before you’ve actually installed the OS, when you boot Ubuntu for the first time? في المرحلة التي أنه لا بقاء "السوداء الى الابد" -- قبل قمت بالفعل بتثبيت نظام التشغيل ، عندما كنت الحذاء أوبونتو لأول مرة؟ Or after a successful install? أو بعد تثبيت ناجحة؟
Thank You so much … it was really cool that you took the time to put this up شكرا جزيلا... انها حقا بارد لكم أن تولى الوقت لوضع هذا الأمر
Do you think you could add steps to install Parallel Tools into 7.04 as well? هل تعتقد أنك يمكن أن تضيف خطوات لتركيب أدوات وبالتوازي إلى 7.04 كذلك؟
Guess you really can run anything on a Mac! تخمين هل حقا يمكن تشغيلها على أي شيء ماك! Very well laid out. وضعت بصورة جيدة جدا.
I’m getting the same error as Wim. انا الحصول على نفس الخطأ كما ويم. Once I start to install it, the screen stays black. وبمجرد أن تبدأ لتثبيت انها ، يبقى الشاشة سوداء. Any ideas? أي أفكار؟ I’m on a MB Core Duo 2GB. أنا على ميغابايت الأساسية الثنائي 2GB.
Worked perfectly! عملت تماما! Thanks for putting this tutorial together. شكرا لطرح هذا البرنامج التعليمي معا.
Black screens by Pratik and Wim! شاشات الأسود من جانب وPratik ويم!
In the installation process, are you sure you don’t accedently press enter when requested? في عملية التثبيت ، هل أنت متأكد من أنك لا accedently الصحافة تدخل عند الطلب؟ “…For the default live system, press ENTER” "... وبالنسبة للتقصير نظام العيش ، اضغط مفتاح الإدخال"
And not: وليس :
* Instead of hitting “Enter” at the next boot screen, then interrupt the boot startup sequence by hitting “function key (fn) + F4? * وبدلا من ضرب "أدخل" الحذاء المقبل في الشاشة ، ثم يقاطع الحذاء تسلسل بدء التشغيل عن طريق ضرب "الوظيفة الرئيسية (الجبهة الوطنية) + F4؟ keys. مفاتيح.
* When you get the “boot:” prompt, then type in “live vga=790? * عند الحصول على "الحذاء :" الفوري ، ثم اكتب في "العيش = 790 تجهيز مرئي؟ and hit enter in order to start the Ubuntu install process وضربت في دخول النظام لبدء عملية تثبيت أوبونتو
[by Kent Bye] [كينت وداعا]
Just a note for anyone who cares.. مجرد ملاحظة لمن يهتم.. I’ve been a big Parallels fan up till now, but Feisty seems to work a lot better in VMware Fusion (whose beta is free). لقد المتوازيات مروحة كبيرة وحتى الآن ، ولكن Feisty يبدو أن تعمل بشكل أفضل كثيرا في VMware فيوجن (التي هي حرة بيتا). It’s worth checking out VMware Fusion and giving it a go. ومن الجدير فحص خارج VMware فيوجن واعطائها الضوء. I imagine VMware will charge for it in the future (or maybe not?) but if you want the most solid Linux VM experience on OS X it’s the way to go.. أتخيل VMware سوف تهمة لأنها في المستقبل (أو ربما لا؟) ولكن إذا كنت تريد أكثر الصلبة لينكس VM تجربة على نظام التشغيل العاشر أنه الطريق إلى الذهاب.. it also supports using both of your cores, which Parallels doesn’t. كما أنها تدعم الخاص بك باستخدام كل من النوى ، والتي لا المتوازيات.
Can you add the info for changing to 1280×800 screen resolution? هل تستطيع أن تضاف معلومات لتغيير إلى 1280 × 800 شاشة القرار؟
Mine hangs at Detecting Hardware كشف الألغام معلقة في الأجهزة
“Loading module piix Intel Corporation 82801BA IDE U…” "تحميل نموذج piix شركة إنتل 82801BA بيئة تطوير متكاملة يو..."
Thank you very much for this seamless tutorial! شكرا جزيلا لهذه الدورة التعليمية السلس! You covered each of the issues that I would have got stuck on. هل تغطي كل واحدة من المسائل التي كنت قد حصلت على تمسك.
I’ve been saying for 10 years that Linux needs to work harder on the little usability things. وانا اقول لمدة 10 سنوات أن لينكس يحتاج إلى العمل بجد على استخدامها الامور قليلا. I’ve tried installing fedora and ubuntu on two separate occassions (albeit in Parrallels) and I failed both times. حاولت تركيب فيدورا وأوبونتو في مناسبتين منفصلتين (وإن كان ذلك في Parrallels) وأنا فشلت في كل الأوقات.
This time is worked! هذا هو الوقت عملت! Thanks. شكرا.
Still, without this tutorial, how would I have know about the “choose Solaris” workaround, or to type “live=790″ or how to get the internet connected. لا يزال ، من دون هذا البرنامج التعليمي ، وكيف أن لدي تعرف عن "اختيار سولاريس" workaround ، أو إلى نوع "يعيش = 790" أو كيفية الحصول على الانترنت متصلة.
Thanks again for the hard work, it is greatly appreciated! شكرا مرة أخرى للعمل الشاق ، هو تقدير كبير! I hope you will provide a lesson in usability to the Linux world. أرجو أن تقدم درسا في قابليتها للاستخدام لينكس العالم.
boxlight
the installation gets to “detecting hardware, please wait” and hangs up there. تركيب تحصل على "اكتشاف العتاد ، الرجاء الانتظار" ومعلقة حتى هناك. I’ve left it for a few hours ans its staying there. لقد تركت لبضع ساعات الجواب عن البقاء هناك. The bottem of that window says “loading ‘piix’ for ‘intel corporation 82801ba IDE U…”. وقد bottem من أن نافذة تقول "تحميل' piix 'ل' شركة إنتل 82801ba بيئة تطوير متكاملة يو... ". Any help? أي مساعدة؟
i am having the same problem… the detecting hardware thing انا لها نفس المشكلة... أجهزة كشف شيء
I just dual booted it: أنا فقط مرتدي حذاء أنها مزدوجة :
http://www.osxautomation.com/2007/04/05/ubuntu-704-dual-boot-mac-book-pro-with-pictures/
Am I the only one trying everything possible to have feisty recognize my macbook pro’s 1440×900 resolution? هل أنا الوحيد الذي يحاول بكل ما هو ممكن لfeisty الاعتراف بلدي macbook الموالية 's1440 × 900 القرار؟
I love a good coincidence, أحب جيدة من قبيل المصادفة ،
Last night I tried doing a duel boot with Ubuntu and it wouldn’t work because of partitioning issues.. الليلة الماضية حاولت القيام مبارزة الحذاء مع أوبونتو وانها لن تنجح بسبب تقسيم القضايا.. Having tried Parallels before I was waiting for the next version to fix the problem. وقد حاول المتوازيات قبل كنت أنتظر النسخة القادمة لعلاج هذه المشكلة.
And then this popped up. وبعد ذلك انتشرت في هذا. Thanks man! بفضل رجل!
I got as far as “Detecting hardware, please wait…” on my Macbook, then nothing…. حصلت بقدر ما "كشف الأجهزة ، يرجى الانتظار..." على بلدي Macbook ، ثم... لا شيء.
Says it’s loading module ‘piix’ for Intel blah blah blah…. وتقول انها تحميل نموذج 'piix' لإنتل بلاه بلاه بلاه....
To those of you w/ the “Detecting hardware piix for intel corporation 82801ba IDE, please wait” and hangs up there - power off the virtual machine using the red square in the right column of Parallels Desktop. الى من ث / "كشف الأجهزة piix لشركة إنتل 82801ba بيئة تطوير متكاملة ، الرجاء الانتظار" ومعلقة حتى هناك -- السلطة قبالة آلة افتراضية باستخدام مربع أحمر في العمود الأيمن من سطح المكتب من المتوازيات. Then start it up again, and try the installation again. ثم أنها تبدأ من جديد ، ومحاولة التثبيت مرة أخرى.
I installed Ubuntu on a friends MacBook Pro today and had the EXACT same problem (though it didn’t occur on my MBP). أنا ركبت أوبونتو على الأصدقاء برو MacBook اليوم وكان بالضبط نفس المشكلة (على الرغم من انها لم تحدث على بلدي MBP). The 2nd time I tried the installation, it went right through. وقد 2nd الوقت حاولت تركيب ، توجه من خلال الحق.
Hope this helps - ويساعد هذا الأمل --
@Chubb and shaved_goat @ Chubb وshaved_goat
I used the instructions from the following website. كنت على تعليمات من الموقع التالي.
http://muffinresearch.co.uk/archives/2006/08/13/running-ubuntu-under-parallels-desktop-for-mac/
Just run Terminal and use the following command فقط تشغيل المحطة الطرفية واستخدام الأمر التالي
sudo dpkg-reconfigure -phigh xserver-xorg sudo dpkg - إعادة - phigh xserver - xorg
and select the resolutions you want. واختيار القرارات التي تريدها.
left this installing 10 hours ago at 90%, came back next morning and it was still at 90% attempting to detect the same hardware as before. غادر تركيب هذا قبل 10 ساعة على 90 ٪ ، عاد صباح اليوم التالي وكان لا يزال 90 ٪ في محاولة للكشف عن نفس المعدات كما كان الحال من قبل.
Upgrading from Ubuntu 6.10 to 7.04 is easy. ترقية من 6.10 إلى 7.04 أوبونتو سيكون أمرا سهلا. See my انظر بلدي
blog: بلوق : http://svenand.blogdrive.com/archive/50.html
I had the same hanging issue while loading the piix device, and tried the “reinstall” that was offered as a solution by someone on here. كان لي نفس شنقا في حين أن مسألة تحميل piix جهاز ، وحاول "إعادة" أن عرض كحل شخص على هنا. No luck…still locking on the same piix device. لا حظ... لا تزال الأقفال على نفس الجهاز piix.
I was happy to find this walkthrough, but it’s not working for me, as the install hangs during “detecting hardware… please wait” while “Loading module ‘piix’ for ‘Intel Corp 82801BA IDE U…” فسعدت هذا تجول خلال ، ولكن هذا ليس عمل بالنسبة لي ، لأن تركيب معلقة خلال "الكشف عن الأجهزة... يرجى الانتظار" في حين "تحميل نموذج' piix 'ل' انتل كورب 82801BA بيئة تطوير متكاملة يو... "
I have a month-old MacBook Pro Core 2 Duo 2.33GHz, 2GB RAM, running Parallels build 3188. لدي منذ شهر برو MacBook الأساسية 2 الثنائي 2.33GHz ، 2GB ذاكرة الوصول العشوائي ، وبناء على التوالي المتوازيات 3188. It was stuck at this point overnight, and I made a second install attempt this morning with a fresh VM, ensuring I didn’t miss any steps. كانت واقعة تحت رحمة في هذه المرحلة ليلة وضحاها ، وأنا قدمت الثانية محاولة تثبيت هذا الصباح مع VM جديدة ، وضمان أنا لم تفوت أي خطوات. The install has been hung at the same point for an hour. وقد تم تركيب معلقة في نفس النقطة لمدة ساعة.
Will report back if I figure it out… وستقدم اللجنة تقريرا لو أنها من أصل الرقم...
I’m sorta confused about why you might want to try ubuntu if you have OS X. OS X is like ubuntu with none of the downfalls. أنا sorta عن الخلط لماذا قد ترغب في محاولة أوبونتو إذا كان لديك نظام التشغيل العاشر العاشر هو مثل نظام التشغيل أوبونتو مع أي من downfalls.
Tried installing twice. حاول تركيب مرتين. Hung up at 90%- Detecting Hardware “Loading module ‘piix’ for ‘Intel Corporation 82801BA IDE U…” التعلق على 90 ٪ -- كشف الأجهزة "تحميل نموذج' piix 'ل' شركة إنتل 82801BA بيئة تطوير متكاملة يو... "
Thanks for the effort of putting this together though. وبفضل الجهود المبذولة لوضع معا على الرغم من هذا. I’ll give VMware Fusion a shot. سوف تعطي VMware فيوجن رصاصة واحدة.
I was getting stuck repeatedly at “detecting hardware… please wait” while “Loading module ‘piix’ for ‘Intel Corp 82801BA IDE U�” and was about to give up. الأول هو أن يعلقوا مرارا وتكرارا في "كشف الأجهزة يرجى الانتظار..." في حين "تحميل نموذج' piix 'ل' انتل كورب 82801BA بيئة تطوير متكاملة يو "وكانت على وشك الاستسلام. I noticed, however, that whenever it hung at 15% during the install it also seemed to hang later (I had a couple of bad attempts b/c I hadn’t given it enough drive space). لقد لاحظت ، مع ذلك ، أنه كلما علق في 15 ٪ خلال تركيب ويبدو أيضا أنه شنق في وقت لاحق (كان لي عدة محاولات سيئة ب / ج أنا لم تعطها ما يكفي من حملة الفضاء). I tried again this morning and it didn’t hang up at 15% and then also got through the HW detect, so it seems like you may be able to watch for that and at least save some time by exiting w/o waiting for it to hang at the end. حاولت مرة أخرى صباح هذا اليوم وأنها لم تغلق الخط في 15 ٪ وبعد ذلك حصلت أيضا من خلال الكشف عن الأب ، حتى تبدو كما لو انها قد تتمكن من مشاهدة لذلك وعلى الأقل إنقاذ بعض الوقت قبل أن تخرج ث / س في انتظار لأنها شنق في نهاية المطاف.
I was getting the “detecting hardware…please wait…Intel Corp 82801BA…” error. الأول هو الحصول على "كشف الأجهزة يرجى الانتظار......... 82801BA انتل كورب" خطأ. I’ve found a couple of workarounds that worked for me: لقد وجد الزوجان من workarounds التي عملت لي :
Setting up Parallels for Ubuntu: إنشاء المتوازيات لأوبونتو :
STEP 2 …select “Typical” instead of “Custom” this got me by the hardware detection hangup every time. الخطوة 2... اختر "النمطية" بدلا من "العرف" هذا حصل لي من قبل الجهاز كشف أغلاق الخط في كل مرة.
Tidying up and adding sound: استخدمت لواضاف سليم :
STEP 2…select for OS Version “Other Linux kernel 2.4″ vs. “Other Linux kernel 2.6″. الخطوة 2... اختر الإصدار لنظام التشغيل "لينكس الأخرى 2.4" مقابل "الأخرى نواة لينكس 2.6". This allowed it to boot past the “ACPI: Unable to locate RSDP” error without hanging at a black screen. وهذا يسمح لها الحذاء الماضي "ACPI : تعذر تحديد موقع RSDP" شنقا دون خطأ في شاشة سوداء.
Like I said, these two changes worked for me and I ran through it a couple of time to make sure it’s repeatable. أود أن أقول إن اثنين من هذه التغيرات وعمل لي وجريت عليه من خلال زوجين من الوقت لنتأكد من أنه مبني على تكرارها.
Good Luck! حظ سعيد!
Additional Info: I should of probably confirmed in my last comment that when you select “typical” instead of “Custom” you still select “Solaris” and “Other Solaris” as the OS and OS Version. معلومات إضافية : أود أن من المحتمل أن أكدت في تعليقي الأخير أن عندما تختار "النمطية" بدلا من "العرف" انك لا تزال اختر "سولاريس" و "سولاريس أخرى" لأن نظام التشغيل ونظام التشغيل الإصدار.
Additional Info: on Tidying up and adding sound you can use the setting “Other Linux Kernel 2.6″. معلومات إضافية : استخدمت لواضاف سليم يمكنك استخدام وضع "نواة لينكس 2.6 الأخرى".
The problem I was experiencing after installing was due to setting the memory to 1gb. فإن كنت تعاني من مشكلة بعد تركيب وكان من المقرر لتحديد الذاكرة 1gb. This seems to cause a problem. ويبدو أن هذا يسبب مشكلة. Use a setting less then 1gb. استخدام تحديد أقل ثم 1gb.
i’m also having the piix problem (macbook pro core 2 duo). أنا أيضا لديها مشكلة piix (macbook الموالية الأساسية الزوجى 2). i followed the directions precisely, including the suggestion of powering on and powering off the virtual machine, but when i power it back on, i don’t get a second chance to install ubuntu. تابعت الاتجاهات على وجه التحديد ، بما في ذلك الاقتراح من بالطاقة على بالطاقة وقبالة آلة افتراضية ، ولكن عندما ط السلطة على العودة ، لا احصل على فرصة ثانية لتثبيت أوبونتو. instead, it just hangs at “Boot from hard drive…”. وبدلا من ذلك ، انها مجرد معلق على "الحذاء من القرص الصلب...". i’ve tried these instructions four times already with no luck. حاولت هذه التعليمات بالفعل أربع مرات مع أي حظ.
including this attempt, i’ve tried to install linux six times in six years (fedora, suse, ubuntu) on three different machines and i’ve only succeeded once. بما في هذه المحاولة ، حاولت لتثبيت لينكس ست مرات في ست سنوات (فيدورا ، سوسإ ، أوبونتو) على ثلاث آلات مختلفة ولقد نجحت مرة واحدة فقط. it apparently still has a long way to go to reach the average consumer. يبدو أنه لا يزال أمامه طريق طويل للوصول الى المستهلك العادي. i hope that someone finds a reliable workaround for this problem because i’ve heard great things about both ubuntu and parallels. وآمل أن يجد شخص ما يعول عليه workaround لهذه المشكلة لأن سمعت أشياء عظيمة عن كل من أوبونتو والشبه.
-chad بين تشاد
earl, إيرل ،
regarding the “typical” vs. “custom” workaround to the piix problem. فيما يتعلق ب "النمطية" في مقابل "العرف" فإن piix لإيجاد حل للمشكلة. i gave that a try and it worked, thanks a lot for the tip. ط أعطى أن محاولة وعملت ، وذلك بفضل الكثير لمعلومات سرية. the interesting thing is that the primary difference between these two methods is that, for me, “typical” automatically allocated 256MB of RAM and 32GB of virtual disk space. الأمر المثير هو أن الفرق الرئيسي بين هاتين الوسيلتين هي أنه ، بالنسبة لي ، "نموذجية" تلقائيا المخصصة 256MB من ذاكرة الوصول العشوائي و32GB من مساحة القرص الافتراضي. so perhaps the problem is just not enough virtual disk space. فلعل المشكلة هي فقط لا يكفي الافتراضية مساحة القرص. previously i’ve only gone as high as 7GB. في السابق كنت فقط ذهبت عالية كما 7GB.
Chad, تشاد ،
Glad the tip worked…I think it’s tied into the amount of memory and virtual disk space. سعيد طرف يعمل... أعتقد أنها مرتبطة إلى مقدار الذاكرة الافتراضية ومساحة القرص. One GB of memory setting causes problems and there may be virtual disk space settings that cause problems as well. واحد جيجابايت من الذاكرة تحديد المشاكل والأسباب قد تكون هناك مساحة القرص الإعدادات الافتراضية التي تسبب المشاكل أيضا.
I was having the piix problem as well and found that setting the memory as high as 768MB seems to trigger this. كنت piix لديها مشكلة وكذلك وجد أن تحديد الذاكرة يصل إلى 768MB ويبدو أن يثير هذا. I got the install to work with 384MB and then changed the VM to use 512MB. أنا حصلت على تركيب العمل مع 384MB وبعد ذلك غيرت VM لاستخدام 512MB. Setting it to 768MB caused the install not to boot. تحديد 768MB لأنها تسبب في عدم تثبيت الحذاء. I only use a 5GB image so you can get away with less than the “typical” 32GB. أنا فقط استخدام 5GB الصورة حتى تتمكن من الهرب مع أقل من "النمطية" 32GB. Hope this helps. ويساعد هذا الأمل.
I use a 3GB MacBook Pro (Core 2 Duo). أنا استخدام 3GB MacBook برو (الأساسية الثنائي 2). A combination of recommendations from مجموعة من التوصيات من Tom توم and و Earl إيرل are spot-on: If I use 512MB (not 768MB), a 5GB image (not 7GB - still using Custom Install vs. Typical), and “Other Linux Kernel 2.4″ (not 2.6) the install works like a charm from start to finish. هي على الفور : اذا كنت تستخدم 512MB (لا 768MB) ، وهو 5GB الصورة (لا 7GB -- لا يزال استخدام مخصص تثبيت مقابل النموذجية) ، و "الأخرى نواة لينكس 2.4" (وليس 2.6) تركيب يعمل مثل سحر من البداية الى اقفال.
Thnx for the guide, you should add the screen resolution trick though. Thnx للدليل ، هل ينبغي أن أضيف الشاشة القرار على الرغم من خدعة.
Nice write-up! نيس متابعة الكتابة! Thanks for this. شكرا لهذا.
James جيمس
awesome! مرعب! i’ve wanted to do this for some time now =) لقد أراد ذلك لبعض الوقت الآن =)
Thanks, these procedures worked perfectly on my 20 inch iMac w/ a GB or RAM, NO PROBLEMS. شكرا ، عملت هذه الإجراءات تماما على بلدي 20 بوصة وآي ماك ث / أ أو جيجابايت من ذاكرة الوصول العشوائي ، أي مشاكل. Even “copied” my parallels directory to my external “My Book” USB2 drive and it worked. حتى "نسخ" بلادي بلادي يوازي دليل لالخارجية "ماي بوك" حملة USB2 وعملت. Again, nicely done - just append those “change video resolution” options and it’s totally complete. مرة أخرى ، القيام به لطيف -- ارفاق هذه مجرد "تغيير الفيديو القرار" خيارات وانها كاملة تماما.
Chris كريس
Any chance of running Beryl? أي فرصة للتشغيل البريل؟ either on Parallels or VMWare? إما على المتوازيات أو VMWare؟
Thnaks for this wonderful tutorial! Thnaks لهذا البرنامج التعليمي الرائع! I got everything running just fine. حصلت على تشغيل كل شيء على ما يرام. It would be great if you could move the hint about not setting more than 512MB of RAM initially to the top of your document. سيكون امرا رائعا لو أمكن نقل تلميح لا عن وضع أكثر من 512MB من ذاكرة الوصول العشوائي في البداية إلى الأعلى من المستند الخاص بك.
I had no problems at all installing and using your instructions on my Macbook 2Ghz with 2GB RAM. لم يكن لدي مشاكل في تركيب واستخدام جميع التعليمات الخاصة بك عن بلادي Macbook 2Ghz مع 2GB ذاكرة الوصول العشوائي. This is my first time using linux and I have to say that for the past several hours I have been amazed at the speed of Ubuntu. هذه هي المرة الأولى التي تستخدم لينكس ويتعين علي أن أقول أن الماضي لعدة ساعات ولقد تم عن دهشتها لسرعة أوبونتو. I also use a Windows desktop, which is pretty quick, but Ubuntu on Parallels on my Macbook is just blazingly fast. وأود أيضا استخدام ويندوز سطح المكتب ، التي هي سريعة جدا ، ولكن أوبونتو على المتوازيات على بلدي Macbook هو مجرد بتوهج بسرعة.
BTW, the total install time, including a few upgrades that were automatically installed by Ubuntu took only 50 minutes in total. راجع للشغل ، فإن مجموع تثبيت الوقت ، بما فيها عدد قليل من التحسينات التي تم تركيبها تلقائيا أوبونتو أحاطت بها فقط 50 دقيقة في المجموع.
Thank you! شكرا لك! Thank you! شكرا لك! Thank you! شكرا لك!
This is just great.. وهذا مجرد كبير.. the live vga=790 made it work, otherwise it didn’t boot. تجهيز مرئي الحية = 790 جعلت العمل ، وإلا لم الحذاء. Thanks! شكرا!
Had black screen problems also when trying to start machine after successfull installation. قد الشاشة السوداء المشاكل أيضا عند محاولة لبدء آلة بعد نجاح التثبيت. Followed instructions from one of the commenters above and all seems well. يتبع تعليمات من واحدة من جميع commenters أعلاه ويبدو جيدا.
Here is what I did: هنا هو ما فعلته :
MacBook Pro OSX 10.4.8 MacBook المؤيدة OSX 10.4.8
1GB/120GB
Installed with latest versions of parallel and ubuntu as at 3rd May 2007 مع تركيب أحدث نسخ من الموازية و3rd أوبونتو في أيار / مايو 2007
=============================================
Having gone to the trouble of partitioning the disk and reinstalling the system and copying files I discovered this site and parallels. وقد ذهب إلى مشكلة تقسيم القرص وإعادة تركيب النظام ونسخ ملفات اكتشفت في هذا الموقع وأوجه الشبه.
First time through got all the way to the end and then a persistant black screen, so tried this recommendation: أول مرة من خلال حصلت على كل الطريق الى نهاية وبعد ذلك استمرار الشاشة السوداء ، وذلك حاولت هذه التوصية :
First time in I forgot to do Step 2, but did get as far as entering a user id and password before the black screen. أول مرة في القيام نسيت الخطوة رقم (2) ، ولكن لم تحصل حتى تدخل معرف المستخدم وكلمة المرور أمام شاشة سوداء. Stopped and started virtual machine and black screen immediately again. توقفت وبدأت آلة افتراضية والشاشة السوداء مرة أخرى على الفور.
Then shut down parallels and restarted, did step 2 (select second Other Linux k, couldn’t see the rest of it) and clicked start arrow again. ثم أغلقت أوجه الشبه وبدأت من جديد ، لم خطوة 2 (اختر الثانية لينكس ك أخرى ، لا يمكن أن نرى بقية منه) والنقر على السهم للبدء مرة أخرى. Got to log in again and all is well. حصلت لتسجيل الدخول مرة أخرى وكل شيء على ما يرام.
Frequently, Ubuntu installations hang when they try to reach out to the network during the install. في كثير من الأحيان ، أوبونتو المنشآت شنق عندما يحاولون الوصول إلى شبكة أثناء التثبيت. When the live version is started, the network is not necessarily configured (do a ping google.com). وعندما بدأت هي النسخة العيش ، وليس بالضرورة شبكة تهيئتها (القيام بينغ google.com).
One solution is to bring up a terminal window and stop and start networking (a restart will not always work). حل واحد هو لطرح نافذة الصالة ، ووقف وبدء الربط الشبكي (أ استئناف لن دائما العمل).
sudo /etc/init.d/networking stop sudo / الخ / init.d / الربط الشبكي وقف
sudo /etc/init.d/networking start sudo / الخ / init.d / الربط الشبكي بداية
crap - that wasn’t it. حماقة -- أن لم يكن.
ross, روس ،
thank you for this walkthrough! شكرا على هذا الحوار تجول! it has proven extremely useful, and i really appreciate the time and effort you put into a genuinely useful walk-through وقد ثبت أنها مفيدة للغاية ، واقدر لكم من الوقت والجهد في وضع مفيد حقا بين من خلال المشي
-brendan بين بريندان
Excellent instructions, particularly the reassurance about the black screens and other intermediate glitches. تعليمات الممتاز ، ولا سيما الاطمئنان عن شاشات سوداء وأخرى وسيطة وأعطال. Thanks to you, I was able to test Kerika on Linux.
A number of folks here at Sun tried this and failed, hanging at the “detecting hardware” problem. The way they got past this was to reduce memory allocation to 512MB, and then it works like a champ!
I instead went to VirtualBox, which I am quite hapy with.
David
Great tutorial!
The virtual HDD (point 6 above) however must be set to more than 2 GB (2048 MB). With 2 GB, I would briefly get a warning during the installation process in Ubuntu indicating that I was running short on HDD space, and then the installation process would quit without messages. I reset the size of the virtual HDD to 3GB (3072 MB) and it worked smoothly.
Superb - excellent tutorial thanks. Worked first time, luck me
I’m now totally stuck with getting Parallels-Ubuntu USB working (parallels sees the devices but not ubuntu) - a new tutorial idea? As a knock on effect, I hunted but couldn’t find a way to move files between parallels-ubuntu and osx - tested ideas?
Help!!!!!!
I’ve installaed Ubuntu on my MacBookPro with parallels. After installation, I’ve tried to lunch Desktop Effects.
Now screen in blank and nothing appears.
Does exist a way to turn off Desktop Effects by command (without GUI)? Please, help me….
Here are some tips for file sharing between Ubuntu and Mac OS X.
http://svenand.blogdrive.com/archive/14.html
I have had a problem with some special character like @ or € because it didn’t type tehm. The solution was to enable the “Third level choosers key”; here is how:
go to System->Preferences->Keyboard->Leyout Options
open the third level chooser and check the “press the right Alt key to choose the 3° level”.
I have tested only with the italian layout but it must works with all the layouts and the symbols that you type pressing the Alt key on Mac Os x.
I hope it could be usefull.
This tutorial was a wonderfully problem-free walkthrough. I was having so much trouble getting linux to run on my MBP, I was beginning to think I was just dumb. But I know now that there were a couple slight errors in my setup process, but it works! First try, I’m very excited
thanks!!
I found it interesting that before I bought Parallels, installing a Ubuntu 6.10 VM was easy and worked perfectly. Then I bought the product and tried to install Ubuntu 7.04 and it has been nothing but a bother. That’ll learn me.
Your instructions were great. Any hints on getting shared networking to work. I use Airport on my MacBook Pro. Again, with 6.10 it just worked. With 7.04, it just does not.
I tried changing the settings in System Preferences. Manually setting the IP addresses for Parallels NAT and Host-Guest (which should be the same? different?) got them to green, but still no Internet connectivity for the VM…..
I am a complete beginner. I tried using desktop effects and now my desktop freezes every time gnome launches. I was wondering if there was anyway to change the settings or reset gnome to default from the terminal. If someone could give step by step instructions I would be really grateful. I don’t want to reinstall.
I just did it! Now the Macbook is a robust development system which has OSX (duh!), Vista, XP, and Linux to boot. Thanks alot for this guide
awesome, works like a charm!
ok so i tried installing ubuntu 7.04 i followed everything step by step, but i just get stuck at the “piix Intel 82801BA IDE” part i stopped it and tried installing again but still doesn’t work like it said on top. Anyone have a solution?
also when i press stop and start again it just hangs at the start up screen saying boot from hard drive …
Everything worked great, but now I can’t get Ubuntu to recognize my CD drive. I just get an error:
“special device /dev/scd0 does not exist”
Any ideas?
BTW, thanks for this great tutorial.
Thank you so much for this guide. Im sure i wil be using it when i get my macbook in the near future. But i did have one question, If i want to install Fedora 6 can i still follow these exact steps (even selecting solaris in the beggining) to get it to work?
Thx so much im glad someone has time to help all of us out =]
Clay
Thanks for an excellent HOWTO. Unfortunately I never got past the “piix Intel 82801BA IDE” part and got stuck there. So I had to give up installing Ubuntu 7.04 using parallels build 3188 on my imac 24.
For those in the same situation, use VMWare Fusion instead and scrap parallels. Installing Ubuntu 7.04 on vmware went like a dream with no problems nor any workarounds necessary.
Hey - whomever did this - thank you so much.
Perfectly executed tutorial (this comment from someone who writes many of them). Thanks for posting this up!
thanks, this helped me alot!
Couldn’t have been easier…thanks to your guide. No problems (other than those you walked us through).
EXCELLENT GUIDE!!!
I couldn’t get past the detecting hardware stall…
I found a posting that said to keep the allocated RAM to less than 512 MB. I did this an had a smooth install on a Macbook Pro. Great instructions otherwise!!
I keep getting the hqanging at “piix Intel 82801BA IDE”. I did what you said and clicked the red square icon in the right column of Parallels Desktop, and power it back on (the green arrow). When I press the GREEN button it loads and sticks on the BIOS menu and seems it cant find the CD even if its connected. I have tried this 6 times with no luck.
Never mind.. Putting the memory @ 500MB worked! Thanks!!!
Will this install also work with Ubuntu-Studio 7?
Can I “link” Macintosh HD to the Parallel?
”
#
I found it interesting that before I bought Parallels, installing a Ubuntu 6.10 VM was easy and worked perfectly. Then I bought the product and tried to install Ubuntu 7.04 and it has been nothing but a bother. That’ll learn me.
Your instructions were great. Any hints on getting shared networking to work. I use Airport on my MacBook Pro. Again, with 6.10 it just worked. With 7.04, it just does not.
I tried changing the settings in System Preferences. Manually setting the IP addresses for Parallels NAT and Host-Guest (which should be the same? different?) got them to green, but still no Internet connectivity for the VM…..
Comment by Ray Kiddy — May 17, 2007 @ 12:18 pm
”
This describes my problem exactly.
I trying to set up ubundu ore Kubundu so I can test the LinuxMCE before I start building machines around it in my home.
There comes another problem, I can not connect the ISO (to become CD/DVD) images for the LinuxMCE ore the openSUSE 10.2 (i386).
when starting ubuntu for the first time i get the error message ” Your CPU does not support long mode. Use 32bit distribution” I am using teh same setup as the author..any ideas what i can do
Glenn -
It sounds like you might have downloaded the 64bit version of Ubuntu - what’s the exact name of the file you downloaded?
Regarding the “piix Intel 82801BA IDE” issue, it seems that 500MB is the magic number for the macbook. It works for me too.
Thanks!
thank you for this tutorial! for weeks ive been trying to get feisty to boot under parallels. the cdrom boot screen shows but then it goes black and never returns. by using the Solaris setting it still went black (no progress bar) but eventually booted into X windows. yea!
Great tutorial.
As a note, this also works for Xubuntu (bit faster response time on a Macbook because the window manager is faster).
I disabled network in the lower toolbar of Parallels and it seemed to work better when getting to the install desktop screen (though maybe it would have worked with network if I would have left it alone for longer and just waited for it to boot).
Critical pieces for Xubunutu:
(1) The solaris trick (see text of article).
(2) Waiting along time when the progress bar seemed to stop at about 10% when going side to side.
For those with the new (Santa Rosa) MacBook Pros:
You won’t need to do the Solaris workaround (just select Linux and Ubuntu), BUT you still do need to specify 500MB for the memory.
The sound is detected automatically too.
A question, but first my thanks - great tute. My problem is that my system hangs at Step 11 (after loading 50-ish%). I turned off the VM in order to restart it, but now it won’t restart properly, hanging on “boot from hard drive…” even though I’ve got the ISO selected to boot from. Repeated turning VM off/on makes no diff.
Any advice? Many thanks,
Ken.
Problem solved - please ignore my above post - seems I got fooled by the issue of transparent progress bars (should’ve read the above posts first!). I did have to set up a new VM and start from scratch, though. The first one was completely non-responsive after an abortive attempt. Thanks all. K
MacPro 2.66, Parallels3.0 Build 4128
I also got the ‘piix Intel 82801BA IDE’ hang and stopping and restarting did not seem to work but trashing the Parallels created files, starting from scratch again but setting memory to 500 MB as Pedro in comment 122 said, let the complete install finish. I did not seem to get a chance to put live vga=790 anywhere, the screen went garbled for awhile, then finally the proper Ubuntu desktop displayed. The subsequent install completed, and restart without the iso available completed nicely. That’s as far as I’ve gotten, Ubuntu is waiting for me to enter a username, oh yeah, now I remember what I told it during the install, yep, I’m in!. Thx, great instructions.
Ken B.
hi,
i would like to know how to install ubuntu parallel with windows XP?
i want to know how can i keep windows XP n ubuntu together in my hdd. it means that whenever i want to use windows i can windows or else i can use ubuntu?
please do help me.i would like to have an answer.i would be glad that to know to pictorial presentation like for Mac.
would be waiting for your reply.
Thanks a lot mate, I have tryed from other websites, but with screen shots its much easier.
I wanted to boot with ubuntu instead of macosx but its still to hard to make it.
Thanks
I got stuck at the “piix Intel 82801BA IDE” stage as well but when I restarted parallels (red square then green arrow), it keeps hangung up on the boot from hard drive… screen
Any ideas
The problem with the install hangup at “piix Intel 82801BA IDE” has to do with RAM/Memory that has been assigned to the virtual machine. This tutorial suggests using 768 MB. If you set it instead to 512MB the install should work properly.
This has something to do with the memory use restrictions for paralles/Ubuntu. For more details visit:
http://forum.parallels.com/thread12670.html
Search the page for post #16, “Success! The problem was somethign to do with RAM allocation…”
Nice tutorial. Thanks for sharing
Hey great tutorial. Was able to quickly setup Ubuntu through parallels.
However I’m running into a problem: I can’t seem to get desktop effects to work. Everytime I attempt to use them (or run Beryl) the system hangs on a white/blank screen. I believe it has to do with video drivers, but having said that, I have visited another website which said something about accessing ‘restricted drivers manager’, but when I go there, it says my hardware does not require restricted drivers. I’m lost.
I have a 2ghz MB w/ 1gb ram (512 allocated to Ubuntu).
Perfect man, thanks! Was doing this the Parallels way with plenty headaches! That Solaris trick was key - now I can try this out and see if I want to put it on my home PC! Now to figure out how to set the correct time lol!
PS I too get the white screen when trying desktop effects - have to do a restart it
Good walk through but do you have one for build 4128 i still get a crc error and the kernal scrams???
I followed this guide. While good, I was still pulling my hair out for two days. What finally did it was to set everything to “Linux”, “Ubuntu”, and install the Parallels tools. (Getting to a terminal was tricky though as the screen was hosed in graphics mode, but if you do this from the start you should be OK.)
One of the key things is that it doesn’t seem to work with RAM>512. The Parallels tools install also set the video RAM to the lowest setting, 4mb–not sure if that matters but I’m leaving it. Also, don’t after installing the Parallels tools, it grays out the resolution settings in the host config screen–just leave it that way, you no longer need it
The result now is the Ubuntu desktop dynamically resizes with it’s host window–very cool! It didn’t do that before. Switching to full screen also makes it completely full screen. Hope this helps! I hope you read this comment first, rather than last out of desperation!
these instructions are perfect. thank you so much.
RE: I’m getting the same error as Wim. Once I start to install it, the screen stays black. Any ideas? I’m on a MB Core Duo 2GB.
Comment by Pratik — April 28, 2007 @ 11:56 am
Hi there, i had the same thing…
The only thing i had to do was changing the resolution to highest in the list (in the install menu)..
Good luck with it ;)..
Most excellent, job well done!
It’s by far the best tutorial I have found for this particular task.
làm cách nào giải quyết những trục chặc khi cai đặt ubuntu, để tránh đánh mất giữ liệu
you rule, this helped me a lot - thank you!
I have Ubuntu 6.06.1 burned onto a disk and a MacBook. How do I boot Ubuntu off of the disk if I just want to try it out before I set it up as a parallel?
Has anyone had trouble with display not starting. Mine install tried 6 times and then shut down. Tried it twice with two different downloads.
right on… Follow the instructions exactly and it worked. Thanks for the post.
Parallels seems to have a problem with clean installs of Ubuntu 7.10 that causes it to barf when switching display settings (like what Rich describes above). I was having the same problem, but followed “Sidney’s” directions at the bottom of this page…
http://forum.parallels.com/showthread.php?t=17069&page=3
…and it seemed to work ok for me.
Thank you, thank you, thank you!
I was having problems getting Ubuntu 7.10 to work with Parallels 3.0 on Leopard. I could not get round the “Intel 82801″ hang. I did as your tutorial suggested.. Switched to Solaris, reduced the memory to 512M… and away we go!
Slight variances I had… When you instruct to restart Ubuntu.. mine actually does and so I then have to shut it down again to do the changes you mention. Also, the Parallels settings start out with the CDROM image on virtual IDE 0:0. Therefore I had to switch that to IDE0:1 so it could see the boot ‘hard’ disc.
Thank you (and the other contributors) so much.
Wow…. Thank you so much. Yes, this is exactly what I needed.
So I successfully got it installed following the instructions and reducing the memory to 512 MB, but I really need more than 512 and increasing it to 768 or 1 GB after install causes the boot to just hang. Has anyone found a solution for this?
thank u for this post
already i try it
awesome walk through… my friend really needed this. thnx.
Leave a Comment ترك التعليق