How to use YamiPod to update your iPod in OS X or Windows如何使用yamipod ，以更新您的iPod在OS X或Windows

YamiPod yamipod is a freeware application that allows you to efficiently manage your iPod in Mac OS X, Windows and Linux.是一個免費的應用，使您可以有效地管理您的iPod在Mac OS X ， Windows和Linux 。 YamiPod is unique because it runs directly from your iPod and needs no installation. yamipod是獨一無二的，因為它直接違背了從您的iPod ，無須安裝。 This allows you to update your iPod from any computer without installing any software.這使您可以更新您的iPod從任何一台計算機，無須安裝任何軟件。 You can also use YamiPod to move files from your iPod back to your computer (or another computer).您也可以使用yamipod移動文件從您的iPod回到您的計算機（或另一台計算機） 。 This tutorial will take you through the steps to setup and use YamiPod in OS X and Windows.本教程將帶您通過步驟來安裝和使用yamipod在OS X和Windows 。

Note: if you’re wondering what’s with all the iPod posts, I’m working on a ‘larger’ article that will be something along the lines of “10 iTunes alternatives for iPod users”, and will reference each of these tutorials in it. 注意：如果您不知道自己是什麼的，與所有的iPod的職位，我工作的一'大'的文章，將一些大致相同的“ 10 iTunes的替代品iPod用戶” ，並會參考上述各教程在它。 That and I finally got my hands on an actual iPod (iShuffle, borrowed).這和我終於我的手對一個實際的iPod （ ishuffle ，借來的） 。

Before you get too far into this, the YamiPod developers strongly suggest that you backup anything currently on your iPod, as there is a chance that something could go wrong and your data could be lost.在你太遠，到這一點， yamipod開發商強烈建議您備份什麼，目前對您的iPod ，有機會能去一些錯誤的和您的數據可能丟失。

Though this tutorial was created using screenshots in OS X, the Windows procedure is very similar, and you should be able to follow along.雖然本教程已創建使用畫面在OS X上的Windows程序是非常類似，您應該能夠按照沿。 The instructions to use YamiPod in Linux can be found指示使用yamipod在Linux可以找到 here這裡 . 。

Download YamiPod from下載yamipod從 http://www.yamipod.com/main/modules/downloads/ . 。 If you have iTunes version 7.3 installed, make sure to scroll down to the Beta version section and download it.如果您有iTunes的版本7.3安裝，請務必將向下滾動，以測試版科和下載它。

1. Start by connecting your iPod and opening iTunes (if it doesn’t auto-launch).開始連接您的iPod和打開iTunes （如果它不自動發射） 。 Select your iPod and then click the Settings tab.選擇你的iPod ，然後單擊設置選項卡。 Scroll down to the Options section and remove the check from the box labeled Open iTunes when this iPod is attached .向下滾動到選項部分和取消選中框打開iTunes時，這是iPod的重視 。 Then place a check in the Enable disk use box (if it isn’t checked already) and make sure there’s at least 40MB of Data storage available (I went with 50 just to be safe).然後設立一個檢查，在啟用磁盤使用框（如果不是已經檢查） ，並確保有至少40mb的數據存儲（可我到50為了安全起見） 。 Click Apply .單擊應用 。 Before you close iTunes, make sure you’ve added at least one song to your iPod via iTunes.之前，您關閉iTunes時，請確定您已經把補充，至少有一首歌到您的iPod通過iTunes 。


click to enlarge點擊放大

2. Drag YamiPod.app from the .dmg file to your iPod (or if you’re a Windows user, drag the exe from the zip file to your iPod).拖曳yamipod.app從。 DMG的文件到你的iPod （或如果您是一位Windows用戶，拖曳的EXE從zip檔案到您的iPod ） 。


click to enlarge點擊放大

3. Launch YamiPod from your iPod.發射yamipod從您的iPod 。


click to enlarge點擊放大

4. If YamiPod can’t guess the type of iPod you have, select it from the drop-down list.如果yamipod不能猜類型的iPod你有，選中它從下拉式列表中。



5. Review the information on the About/Warning screen and then click I agree .審查資料，有關約/警告畫面，然後單擊我同意 。


click to enlarge點擊放大

6. Now you’ll be presented with the main YamiPod interface.現在您將介紹主要yamipod界面。 You should see the songs you currently have loaded on your iPod listed.您應該看到的歌曲您目前已裝上您的iPod上市。 To add files to your iPod, drag them from your music folder (and you can drag entire folders) into the bottom section of the YamiPod window.將檔案新增至您的iPod ，拖動它們從你的音樂文件夾（你可以拖動整個文件夾）到底部一節的yamipod窗口。


click to enlarge點擊放大

7. The Add To Ipod window will appear. 添加到iPod視窗將會出現。 You can review each song, modify the file info etc. Since all my tracks were already tagged properly, I selected Add All .您可以檢討，每首歌曲，修改檔案信息等，因為我所有的路軌已經妥善標記，我選定的添加所有 。



8. Watch as the tracks are uploaded to your iPod.看著鐵軌都是上傳到您的iPod 。



9. And there they are.和它們就在那裡。 You can preview them using the play button in the bottom bar.您可以預覽他們使用播放按鈕在底部的酒吧。 When you’re done updating your iPod, quit YamiPod.當您完成更新您的iPod ，退出yamipod 。


click to enlarge點擊放大

10. A feedback window will appear the first time you close YamiPod.反饋視窗就會出現在您第一次密切yamipod 。 Take a moment or two to fill in the info to help the developers improve future versions, and then click Send .採取的時刻或二，以填補在信息，以幫助發展商改善未來的版本，然後單擊發送 。



11. Now you can eject your iPod by right-clicking it (ctrl-click for single mouse folks) and select Eject .現在，您可以退出你的iPod上按一下滑鼠右鍵，它（按Ctrl點擊鼠標單一的鄉親） ，並選擇退出 。 Windows users - use the “safely remove hardware” icon in your system tray to disconnect your iPod. Windows用戶-使用“安全刪除硬件”圖標在系統托盤中斷開您的i Pod。


click to enlarge點擊放大

12. The next time you connect your iPod, iTunes should not launch.當您下一次連接您的iPod時， iTunes 不應該推出。 Open your iPod and run YamiPod to add/remove songs etc. For info on some of the advanced features of YamiPod, see the打開你的iPod和運行yamipod到添加/刪除歌曲等信息的一些高級功能， yamipod ，請參閱 docs section文件第 of the YamiPod site.該yamipod網站。