I suppose this goes without saying, but just in case - make sure you have a我猜想這不用說，只是在案件-確保你有 jailbroken iPhone or iPod Touch. iPhone或iPod觸摸。 Without it, you won’t have Installer.app on your device.沒有它，你不會有Installer.app您的設備上。 To add additional sources to Installer - which will give you a wider variety of software to install, follow the instructions outlined below.要添加其他來源的安裝-這會給你一個更廣泛的各種軟件安裝，然後按照指示概述如下。
- Tab the Installer icon on your home screen.標籤安裝程序的圖標，您的家庭屏幕。
- Select Sources from the bottom button-bar.選擇源從底部按鈕吧。
- Select the Edit button in the upper-right corner of the screen.選擇編輯按鈕在右上角的屏幕上。
- Select the Add button from the upper-left corner of the screen.選擇添加按鈕從左上角的屏幕上。
- Use the on-screen keypad to enter the source you want to add.使用屏幕鍵盤輸入的來源要添加。 There’sa pretty good list還有相當不錯清單 here這裡 , but a ，但 Google search谷歌搜索 will reveal even more.將揭示甚至更多。 Tap OK when you’re done.塔確定當你做。
- Your sources list will now refresh.源列表現在刷新。
- Scroll through the list of software sources to confirm the one you just entered was successfully added.滾動列表的軟件來源，確認你剛剛進入已成功加入。 When you’re done, click Done in the upper-right corner.當您完成後， 單擊完成在右上角。
- That’s it!這樣就大功告成了！ To install new apps (from the source you just added, and/or all others), just tap Install from the bottom button-bar.如果要安裝新的應用程序（從源頭上你剛才說，和/或所有其他人） ，只需安裝自來水從底部按鈕吧。
{ 4 trackbacks } （ 4 ）搬場
{ 7 comments… read them below or （ 7條意見...閱讀低於或 add one添加一個 } ）
well, i got my apple’s app but when i went to install it didin’t appear iphone ti ipod touch apps can u tell me what is the problem ?嗯，我有我的蘋果的應用程序但是當我去安裝它didin't出現蘋果iphone觸摸鈦應用掉頭告訴我是什麼問題呢？ thanks謝謝
Salut Mon ipod touch , moi quand je mets “applerepo.com” il me dit apres “could not refresh sources ” et voila quoi et j ai pas apple repostery … donc voila quoi merci :pa bientot拯救星期一的iPod觸摸，報quand濟大都會“ applerepo.com ”一箱審計閱“無法刷新源”等voila貴等j愛考績蘋果repostery ... donc voila貴merci ：巴bientot
I have iphone & i have lost my installer app while installing some other packages.我有iphone ＆我已失去了我的安裝程序，同時安裝其他一些軟件包。 Please let me know how to recover or install, installer app on iphone請讓我知道如何恢復或安裝，安裝在iPhone上應用
Hi,嗨，
I have the iPod touch 16Gb running 1.1.4.我的iPod觸摸16GB的運行1.1.4 。
I have run ZiPhone and that was without problems.我已經運行ZiPhone ，這是沒有問題的。 The Installer app was now available.在安裝程序是現在可用。
Now I wanted to add additional sources and followed the description.現在，我想添加更多的來源和遵循的描述。 When entering the當進入 http://labs.ispazio.net address, it started refreshing, but returned with the error “Could not refresh source” and a Uncategorized source was created, title Untiled Source with the address below it.地址，開始令人耳目一新，但傳回的錯誤“無法刷新源”和慶源創建，標題Untiled源的地址下面。
Please help me out here: Wat is the cause of this and how can I continue without errors?請幫我在這裡：笏的原因是這和我怎麼能夠繼續進行的錯誤？
Thank you.謝謝您。
“Failed to refresh sources” (or “Could not refresh source”) “無法刷新源” （或“無法刷新源” ）
I found it out now.我發現它現在。 -> This is caused by the fact that I did not had WiFi enabled!!!! -> “這是所造成的事實，我沒有啟用了無線！ ！
So to anyone, make sure it is enabled when adding a source !因此，任何人，確保它是啟用時，增加了來源！
-Marco ，馬
Hi,嗨，
I have the iPod touch running 1.1.4 firmware.我的iPod觸摸運行1.1.4固件。 when i try to install a source it refreshes about half-way and then says failed to refresh sources.當我嘗試安裝它的來源刷新大約一半路，然後說，沒能刷新來源。 i do have my WiFi enabled, so please help!我有我的WiFi功能，所以請幫助！
i have the same problem!!我有同樣的問題！ wifi is enabled but it can’t refresh sources! WiFi是啟用，但它不能刷新來源！ tried with a few sources.試圖與一些來源。 HELP!!!幫助！
Leave a Comment發表您的評論