This tutorial will guide you in enabling Remote Desktop in Vista, and then connecting to Vista from your Mac.本教程將引導您在使遠程桌面在Vista中，然後連接到Vista的從你的Mac 。 Using Remote Desktop you can completely control your Vista PC, from your Mac.使用遠程桌面，您可以完全控制你的Vista PC ，從您的Mac 。
- In Vista, open your Control Panel and select System and Maintenance .在Vista中，打開您的控制面板 ，並選擇系統和維修 。
- Now select System現在選擇系統
- From the panel on the left, click Remote settings .從小組在左側單擊遠程設置 。
- The System Properties window should open, with the Remote tab displayed. 系統屬性窗口應敞開大門，提供遠程選項卡顯示。
- Place a check in the box labeled Allow connections from computers running any version of Remote Desktop (less secure) .地方檢查，在方塊中標示允許從計算機運行任何版本的遠程桌面（不太安全） 。 Unless you’ve set Vista to “never sleep” in the Power Options , you’ll get a little pop-up telling you that when your Vista PC is asleep, users can’t connect to it.除非您已設置了Vista的“永不睡眠” ，在電源選項 ，您將獲得一個小的彈出式告訴你，當你的Vista PC是睡了，用戶無法連接到它。 Click OK .單擊確定 。
- If you have several people using your PC and each has their own profile, and you want to only allow some of them to remotely access Vista, click the Select Users button.如果您有幾個人使用您的PC和每個都有自己的個人資料，並且想要只允許他們中的一些，以遠端存取Vista中，按一下選擇用戶按鈕。 Note that anyone with administrative privileges will be able to connect.請注意，任何人與行政特權，將能夠連接。
- Select the user(s) you want to allow access and click the Add… button. Note: in the screenshot below there are no users, as my Vista PC only has one user.選擇的用戶（ ）你想允許訪問，然後點擊添加…按鈕。 注意：在下面的截圖中有沒有用戶，正如我的Vista PC只有一個用戶。 Click OK .單擊確定 。
- Back at the Remote tab of the System Properties window click Apply and then OK .回到在遠程選項卡的系統屬性窗口，單擊應用，然後確定 。
Now return to the Control Panel and in the Security section, click Allow a program through Windows Firewall .現在返回到控制面板，並在安全區段中，按一下，讓一個程序通過Windows防火牆 。
- Make sure that the box labeled Remote Desktop has a check.作出肯定的是，標示的遠程桌面有一個檢查。
If you’re using a Firewall other than the one built in to Windows Vista, you’ll need to manually allow connections on port 3389 using UDP.如果您使用的防火牆以外的一個建於到Windows Vista ，您需要手動允許連接的端口3389 ，使用UDP 。
- Now that you’ve finished setting up Remote Desktop in Vista, you’ll need to download a Remote Desktop client for OS X. Head over to現在，您已經完成設立遠程桌面在Vista中，您需要下載一個遠程桌面客戶端為OS X的頭部向 http://cord.sourceforge.net and download CoRD v0.5 Beta 1 (or later).和下載線v0.5 Beta 1中（或更高版本） 。 Earlier versions of CoRD will not work with Vista.舊版的臍血將不會與Vista的工作。 Installing CoRD is as easy as you’d expect - just drag the program to your Applications folder.安裝線一樣容易您預期的那樣-只是拖曳計劃到您的應用程序文件夾。 Launch it from there.發射它從那裡。
- If the Servers panel isn’t displayed (it should be by default) click the Servers button from the top toolbar.如果服務器小組是不顯示的（應該由默認）按一下按鈕， 服務器從頂部的工具欄。 Then click the plus sign ( + ) button in the bottom right corner of the Servers side panel.然後單擊加號（ + ）按鈕在右下角的服務器側邊面板。
- Enter the IP address your Vista PC is using.輸入IP地址您的Vista PC使用。 If you’re connecting over a local network, enter the IP address assigned by your router/gateway.如果您連接一個本地網絡，輸入IP地址分配由您的路由器/網關。 If you’re connecting across the Internet, and your Vista PC is behind a router, make sure to forward UDP on port 3389 to Vista.如果您連接網際網路之間，並且您的Vista PC背後是一個路由器，一定要提出對UDP的端口3389至Vista 。
Then enter the user name and password you use to sign in to Vista.然後輸入用戶名和密碼，您用來登錄到Vista 。 Place a check in地方檢查，在
Save password if you don’t want to enter it each time.保存密碼如果您不想進入它每一次。 Review the other options and make changes as you see fit (the defaults are good to start with).審查的其他選項並做出變更，正如你看到合適的（默認值是好的開始） 。 Close the New Server window when you’re done.關閉新服務器窗口時，即可大功告成。 - Double-click the new entry in your Servers list.雙擊新項目在您的服務器名單。
- And you’ll connect to your Vista PC.和您連接到您的Vista PC 。 From here you can control Vista as if you were sitting in from of it.從這裡您可以控制Vista的作為如果你坐在在從它。
click to enlarge點擊放大
![[ del.icio.us ]](http://images.del.icio.us/static/img/delicious.small.gif){kind=small}
{ 3 trackbacks } （ 3 trackbacks ）
{ 2 comments… read them below or （ 2評論…閱讀他們或低於 add one新增1 } ）
the info does not clarify/explain whether the vista remcon is NOT using a standard vnc based protocol, like osx does …信息不澄清/解釋是否Vista的remcon是不是使用標準的VNC根據議定書，像OSX上是否…
is it necessary to download CORD because vista remcon is a proprietary?!是否有必要下載線，因為Vista的remcon是一個專有的嗎！
I need the opposite.我需要相反。 I’ve got a samsung printer connected via usb to an IMac (leopard).我有自己的三星打印機連接通過USB接口與一的iMac （豹） 。
On the mac networking is already open, but I cannot find out the periferal in vista.在Mac網絡已經打開，但我不能摸清periferal在Vista中。 I must say I’m not that cute in windowa world.我必須說我不認為，在窗口可愛的世界。 Thanks謝謝
Leave a Comment留下意見