How to silence a loud video card fan如何保持沉默，大聲視頻卡風扇

About a month ago I decided I was going to do something about the insanely loud noise coming from my PC.大約一個月前，我決定我要做點事關於瘋狂的巨響從我的電腦。 I incorrectly assumed it was one of the large fans at the back causing what sounded like a jet-engine noise. i錯誤地假定它是一個大型的球迷在回造成什麼聽起來像是噴氣發動機的噪音。 Turns out, it was the tiny little fan on the video card creating all the ruckus.原來，這是非常微小的範對視頻卡創造的所有ruckus 。 Thanks to感謝 The Shadow陰影 over at the超過在 How-To Geek forums如何到發燒友論壇 my video card fan is now running completely silent.我的視頻卡的範現正運行的完全沉默。 If your video card is running loudly, follow the steps outlined below to quiet the little guy down.如果您的視頻卡運行大聲疾呼，請按照下面列出的步驟，以安靜的小人物。

A few things to note up front - the steps in this tutorial are specific to my video card.幾件事要注意前方-步驟，在此教程是具體到我的視頻卡。 If you have a new super-fancy card, you’ll probably have to improvise a bit as they can be almost completely encased in the cooling system/fan(s).如果你有一個新的超級花式卡，您可能要即興一點，因為他們幾乎可以完全包裹在冷卻系統/範（ ） 。 And, I apologize in advance for the rather poor quality pictures, my digital camera is… lacking.和，我事先表示歉意為，而不是質量低劣的照片，我的數碼相機是…缺乏。

1. To make your video card run quietly, you’ll need the following items:讓您的視頻卡悄悄地運行，您需要下列項目：
   1. A normal sized Phillips head screwdriver一個正常大小的菲利普斯頭螺絲刀
   2. A “small” sized Phillips head screwdriver一個“小”大中型菲利普斯頭螺絲刀
   3. Ideally, very fine high-grade machine oil.理想的情況是，極微細的高等級機油。 Sewing machine oil worked fine for me.縫紉機油工作，罰款我。
   4. A hypodermic syringe. 1皮下注射器。 If you don’t have one handy, a sewing needle, sharp thumb-tack or push-pin will also work如果您還沒有一個很方便的，縫紉機針，夏普拇指釘或推動引腳也將工作
   5. A loud video card響亮的視頻卡


click to enlarge點擊放大

2. Turn off your PC.關掉你的電腦。 Unplug the power to it.拔掉電源給它。 Remove the casing from your computer.刪除套管從您的計算機。 Most cases have an “easy access door” on the side, but if you have an older PC you might have to unscrew it from the back.大多數情況下，有一個“方便門”對方，但如果你有一個舊的PC您可能必須擰它從背部。
3. Use the regular size Phillips head screwdriver to unscrew your video card, and carefully remove it from your PC.使用常規的大小菲利普斯頭螺絲刀來擰您的視頻卡，並仔細地將它移除，從您的PC 。 Place it face up on a wood or plastic surface (nothing metal).它置於面對在一個木材或塑料表面（無金屬） 。
4. Use the small size Phillips head screwdriver to remove the screws that hold the fan onto the heatsink.使用小尺寸菲利普斯頭螺絲刀，以消除螺絲舉行風扇上的散熱片。


click to enlarge點擊放大

5. Flip the fan over so it’s face-down.翻轉範超過所以的臉向下。


click to enlarge點擊放大

6. Fill your syringe with a few drops of machine oil (or sewing machine oil).填寫您的注射器與幾滴機油（或縫紉機油） 。 Use the needle to inject a drop or two (no more) through the sticker into the ball-bearing cavity.使用的針頭注入下降或2 （不） 通過貼紙，進入球軸承腔。 You might have to poke around a couple of times to find the cavity - you’ll know you’ve hit it when the needle punctures the sticker.您可能必須戳左右，一對夫婦多次找到腔-您知道您打時，針頭穿刺的貼紙。


click to enlarge點擊放大

7. If you don’t have a syringe and you’re using a sewing needle, thumb-tack or push-pin, poke a hole through the sticker.如果你沒有一個注射器和您使用的縫紉機針，拇指釘或推針，戳一個洞，透過貼紙。 Carefully put one drop of oil on top of the hole, and use the pin to work the oil through the hole into the ball-bearing cavity.小心把一滴石油再加上孔，並使用密碼的工作油通過孔進入球軸承腔。


click to enlarge點擊放大

8. Now place your finger on top of the small hole created by the needle/pin, and spin the video card fan around a few times.現在的地方，您的手指放在上方的小洞，所產生的針頭/針，和自旋視頻卡風扇周圍幾倍。 This will work the oil into the bearings.這將工作油進入軸承。
9. Screw the fan back on to the heatsink, and plug your video card back into your computer.螺桿風機回就向散熱片，並堵塞您的視頻卡返回到您的電腦。 Plug the power back in, and turn it on.堵塞的權力早在，並打開它。 Once your card heats up to the point where the fan turns on, it should be running completely silent!一旦您的信用卡升溫，以點風機輪流上，應該運行完全沉默！