Skip to content Gå til innhold


How to install a tftp client in Windows Vista Hvordan installere en TFTP-klient i Windows Vista

Windows

This brief tutorial will guide you through installing a tftp client in Windows Vista. Denne korte veiledningen vil guide deg gjennom installere en TFTP-klient i Windows Vista.

There's a tftp program included with Vista, it's just not installed by default. Det er en tftp program som følger med Vista, det bare ikke installert som standard. To install it, follow these steps. Hvis du vil installere den, følger du denne fremgangsmåten.

  1. Open the Control Panel and select the Programs entry. Åpne Kontrollpanel og velg Programmer oppføring.

  2. click to enlarge Klikk for å forstørre

  3. From the Programs and Features section, select Turn Windows features on or off . Fra Programmer og funksjoner delen velger Slå Windows-funksjoner på eller av.

  4. click to enlarge Klikk for å forstørre

  5. Scroll down the list and place a check in the box next to TFTP Client . Bla nedover i listen og sett et merke i boksen ved siden av TFTP klient. Click OK . Click OK.

  6. click to enlarge Klikk for å forstørre

  7. Give Windows a moment or three to install the tftp client. Gi Windows et øyeblikk eller tre for å installere TFTP klienten. When it's done, exit out of the Control Panel. Når det er gjort, gå ut av kontrollpanelet.
  8. And now you can use tftp in Vista! Og nå kan du bruke TFTP i Vista!

  9. click to enlarge Klikk for å forstørre

Posted in Posted in Windows Windows . .

Related Posts: Relaterte innlegg:

How to flash the Linksys WRT54G v8 with the DD-WRT Firmware Hvor å blinke med Linksys WRT54G V8 med DD-WRT Firmware
Screenshot Simulation: Windows Vista TCP/IP Properties Skjermbilde Simulering: Windows Vista TCP / IP Properties
An introduction to Azureus Vuze (a BitTorrent client and more) En introduksjon til Azureus Vuze (en BitTorrent klient og mer)
How to allow a program through the Windows Vista Firewall Hvordan tillate et program gjennom Windows Vista-brannmuren
How to connect to Windows Vista using Remote Desktop from your Mac Hvordan koble til Windows Vista bruker Remote Desktop fra Mac

One Response One Response

Stay in touch with the conversation, subscribe to the Holde kontakten med samtalen, abonnere på RSS feed for comments on this post RSS feed for kommentarer til dette innlegget . .

Continuing the Discussion Fortsetter Discussion

  1. Flashing Your Linksys WRT54G Router (V8) « The AndrTech Blog Flashing Din Linksys WRT54G Router (V8) «The AndrTech Blogg linked to this post on April 5, 2009 knyttet til dette innlegget den 5 april 2009

    [...] To do so, enter the appropriate command for your Operating System:Windows: (note: Vista users will need to install tftp first) enter tftp -i 192.168.1.1 put dd-wrt.v24_micro_generic.bin from the Command Prompt. [...] For å gjøre dette, skriver den aktuelle kommandoen for operativsystemet: Windows: (merk: Vista-brukere må installere TFTP først) skriv tftp-i 192.168.1.1 putte dd-wrt.v24_micro_generic.bin fra kommandolinjen Prompt. Make sure that [...] Kontroller at [...]



Some HTML is OK Some HTML is OK

or, reply to this post via eller svare på dette innlegget via trackback styrekule . .