How to flash the Linksys WRT54G v8 with the DD-WRT Firmware如何闪光Linksys的wrt54g V8引擎与房屋署副署长- wrt固件

This tutorial will walk you every step of the way through flashing your Linksys WRT54G (version 8) router to use the DD-WRT firmware.本教程将引导您完成每一步的方式，通过闪动您的Linksys wrt54g （第8版）路由器使用的DD - wrt固件。

According to Wikipedia, the Linksys WRT54G v8.0 is “currently one of the most commonly available (routers) at US retail establishments, such as Best Buy and Target”.根据维基百科， Linksys的wrt54g v8.0是： “目前，其中一个最普遍的（路由器）在美国零售场所，如Best Buy的和目标” 。 Due to hardware limitations, the 8.x versions (8.0, 8.1 and 8.2) are only able to run the “micro” version of the DD-WRT firmware (you can find a firmware version feature comparison chart由于硬件限制， 8.x版本（ 8.0 ， 8.1和8.2 ）只能够运行“微观”版本的房屋署副署长- wrt固件（你可以找到一个固件版本功能比较图表 here这里 ). ） 。 Even so, the micro version of the DD-WRT firmware provides dozens of features, many of which are not available with the default Linksys firmware.即使如此，微型版本的房屋署副署长- wrt固件提供了几十个特征，其中有许多是不具备的默认的Linksys固件。

This walkthrough is based on the这是漫游的基础上， WRT54G v8.x tutorial on the DD-WRT wiki wrt54g v8.x补习就房屋署副署长- wrt的wiki . 。 The biggest difference between this one and the one on the DD-WRT wiki is that I’ve elaborated a bit, and provided screenshots for each step.最大的差别，这1和1对副署长- wrt Wiki是我已经拟定了一个位，并提供画面的每个步骤。

Please make sure you understand each step before you complete this tutorial.请确认您了解每一个步骤之前，您完成此教程。 If you’re unsure of anything, please leave a comment and I’ll respond as soon as I can.如果您不确定的话，请留下评论，我将尽快作出回应，我可以。 It is possible to brick (render the router unusable) your device if done incorrectly.是有可能的砖（使路由器无法使用）如果您的设备做了不正确。

1. You’ll need to use a wired ( not wireless ) computer to flash your WRT54G with the DD-WRT firmware.您需要使用有线（ 不无线 ）电脑闪存您wrt54g与房屋署副署长- wrt固件。 Make sure that computer (doesn’t matter if it’sa Mac or PC running Windows or Linux) is plugged in to Port 1 of your router.确保电脑（不要紧，如果是Mac或PC上执行Windows或Linux ）是堵塞在港口1您的路由器。 Unplug all other devices from the router - you can leave the WAN port plugged in to your cable/DSL modem.拔下所有其他设备，从路由器-你可以离开湾港口堵塞到您的有线/ D SL调制解调器。
2. Download the files下载档案 vxworkskillerGv8-v3.bin vxworkskillergv8 - v3.bin and和 dd-wrt.v24_micro_generic.bin房屋署副署长- wrt.v24_micro_generic.bin to the computer you’re going to use to flash your WRT54G (the one plugged in to Port 1 of your router).到计算机上您要使用的Flash您wrt54g （ 1堵塞在港口1您的路由器） 。
3. You’ll need to set your computer to use the following static IP settings:您需要将您的计算机设置为使用下列静态IP设置：

   IP Address: 192.168.1.100 IP地址： 192.168.1.100
   Subnet Mask: 255.255.255.0 子网掩码： 255.255.255.0
   Gateway: 192.168.1.1 网关： 192.168.1.1


OS X Static IP Settings OS X的静态IP设置


Windows Static IP Settings在Windows静态IP设置

4. Unplug the power cord from the WRT54G.拔掉电源线从wrt54g 。 Push the Reset button (see image below) while plugging the power cord back in, and hold down the button for about 20 seconds.推动复位按钮（见下面的图片） ，而堵塞的电源线早在，按住按钮约20秒。 Use a pencil or ball-point pen to push and hold the Reset button - it’sa bit recessed and very difficult to push and hold with your finger or fingernail.使用铅笔或圆珠笔，推动并按住复位按钮-这是位休会，并就很难推动和进行与您的手指或指甲。


click to enlarge点击放大

5. Open your browser and enter the address打开您的浏览器和输入地址 http://192.168.1.1 . 。 Use a browser other than Firefox, as issues have been reported with Firefox not being able to flash the device properly.使用浏览器除 Firefox以外的其他 ，因为问题已得到报告，与Firefox未能闪光装置。 I’ve used Safari and Internet Explorer and both had no problems.我已使用Safari和Internet Explorer和都没有问题。

   You’ll be presented with a Management Mode Firmware Upgrade page.您会得到一个管理模式，固件升级页。 Click the Choose File button.按一下选择文件按钮。


click to enlarge点击放大

6. Navigate to the vxworkskillerGv8-v3.bin file, select it, and close Choose (or Open if you’re using IE).浏览到vxworkskillergv8 - v3.bin的文件，选择它，并关闭选择 （或打开如果您使用IE ） 。


click to enlarge点击放大

7. Make sure that vxworkskillerGv8-v3.bin is listed on the Management Mode Firmware Upgrade page, and click the Apply button.确保vxworkskillergv8 - v3.bin是上市的管理模式，固件升级页，并点击应用按钮。


click to enlarge点击放大

8. Wait for at least two minutes before you go any further. 等待至少两分钟前，你到任何进一步的。 After the 2 minutes is up, if you notice a dialog asking you to reboot the router, do so by unplugging the power cord and plugging it back in again.后2分钟了，如果您看到一个对话框，要求您重新启动路由器，这样做，拔出电源线和堵塞，这回再次在。 If you don’t get a message telling you to reboot the router, wait another 3-4 minutes and then reboot the router.如果您没有收到讯息，告诉您重新启动路由器，再等3-4分钟，然后重新启动路由器。


click to enlarge点击放大

9. You should be able to ping 192.168.1.1 (in Linux or OS X open a Terminal and type ping 192.168.1.1 . In Windows open a Command Prompt by clicking Start , selecting Run enter cmd and then type ping 192.168.1.1 ).你应该能ping 192.168.1.1 （在Linux或OS X打开一个终端，并键入 ping 192.168.1.1 。在Windows打开一个命令提示符单击开始 ，选择运行输入cmd ，然后键入 ping 192.168.1.1 ） 。 If the router doesn’t reply you probably haven’t set your network settings correctly (step #3 above).如果路由器不答复您可能没有设置您的网络设置正确（步骤＃ 3段） 。


click to enlarge点击放大

10. Now it’s time to flash the WRT54G with the DD-WRT firmware.现在的时间，快闪wrt54g与房屋署副署长- wrt固件。 To do so, enter the appropriate command for your Operating System:这样做，输入适当的命令，为您的作业系统：

    Windows : (note: Vista users 在Windows ： （注： Vista用户 will need to install tftp first将需要安装的TFTP第一 ) enter tftp -i 192.168.1.1 put dd-wrt.v24_micro_generic.bin from the Command Prompt. ）输入的TFTP我192.168.1.1付诸表决，房屋署副署长- wrt.v24_micro_generic.bin从命令提示符。 Make sure that the dd-wrt.v24_micro_generic.bin file is in the same folder that you’re using the Command Prompt from.作出肯定的是，房屋署副署长- wrt.v24_micro_generic.bin文件是在同一文件夹中您使用的命令提示符。 For example, if you downloaded dd-wrt.v24_micro_generic.bin to your Desktop, make sure the Command Prompt reads C:\Documents and Settings\ your-user-name \Desktop> - where your-user-name is your Windows user name.例如，如果您下载的房屋署副署长- wrt.v24_micro_generic.bin到您的桌面上，请务必命令提示符，内容为C ： \文件和设置\ 您的用户名 \桌面> -在哪里你的用户名称是您的W indows使用者名称。

    Linux : enter tftp -m octet 192.168.1.1 -c put dd-wrt.v24_micro_generic.bin at your shell/terminal. Linux作业系统 ：输入的TFTP -米八位组192.168.1.1 - C的付诸表决，房屋署副署长- wrt.v24_micro_generic.bin在你的shell /终端。 Note: if you get the the message error code 3 while trying to flash it, try atftp.注意：如果您得到的讯息错误码三 ，而试图闪光，尝试atftp 。 The aftp command is: atftp –option “mode octet” –verbose -p -l dd-wrt.v24_micro_generic.bin 192.168.1.1该aftp命令是： atftp选择 “ 模式八位组 ” -详细-升房屋署副署长- wrt.v24_micro_generic.bin 192.168.1.1

    OS X : enter tftp -e 192.168.1.1 From the tftp> prompt enter put dd-wrt.v24_micro_generic.bin OS X的 ：输入的TFTP娥192.168.1.1从的TFTP >提示输入付诸表决，房屋署副署长- wrt.v24_micro_generic.bin

    Make sure that the dd-wrt.v24_micro_generic.bin file is in the same folder that you’re using the Terminal from.作出肯定的是，房屋署副署长- wrt.v24_micro_generic.bin文件是在同一个文件夹，您所使用的终端。 For example, if you downloaded dd-wrt.v24_micro_generic.bin to your Downloads folder, make sure you’re using the Terminal prompt from /Users/ your-user-name /Downloads - where your-user-name is your Mac user name.例如，如果您下载的房屋署副署长- wrt.v24_micro_generic.bin到您的下载文件夹，请确保您使用的终端机的提示/用户/ 你的用户名称 /下载-您的用户名称是您的M ac使用者名称。


click to enlarge点击放大

11. The file will be transferred and automatically installed.该文件将被转移和自动安装。 Once this is done, DD-WRT will automatically boot.一旦这样做，房屋署副署长- wrt会自动开机。 After about a minute, you can browse DD-WRT on your router at后约一分钟，您可以浏览房屋署副署长- wrt就在您的路由器 http://192.168.1.1 . 。


click to enlarge点击放大

12. If you browse away from the main page, you’ll be prompted for a user name and password.如果您浏览远离主网页，系统会提示您一个用户名和密码。 The default user name is: root and the default password is: admin .默认的用户名是： 根和默认的密码是： 政府当局 。 To change the user name and/or password (a very good idea!!) - select the Administration tab and then the Management tab.要更改用户名和/或密码（一个很不错的主意！ ） -选择，政府当局标签，然后管理标签。 Enter your new user name and/or password in the spaces provided, and click the Save button at the bottom of the screen.输入新的用户名和/或密码在该位提供，并点击保存按钮，在屏幕的底部。


click to enlarge点击放大

13. When you navigate away from the Management tab, you’ll be prompted to enter your user name and password again.当您浏览脱离管理选项卡，系统会提示您输入您的用户名和密码。 Enter your new user name and/or password to continue.输入新的用户名和/或密码，以继续进行。