How to flash the Linksys WRT54G v8 with the DD-WRT Firmware如何閃光Linksys的wrt54g V8引擎與房屋署副署長- wrt固件

This tutorial will walk you every step of the way through flashing your Linksys WRT54G (version 8) router to use the DD-WRT firmware.本教程將引導您完成每一步的方式，通過閃動您的Linksys wrt54g （第8版）路由器使用的DD - wrt固件。

According to Wikipedia, the Linksys WRT54G v8.0 is “currently one of the most commonly available (routers) at US retail establishments, such as Best Buy and Target”.根據維基百科， Linksys的wrt54g v8.0是： “目前，其中一個最普遍的（路由器）在美國零售場所，如Best Buy的和目標” 。 Due to hardware limitations, the 8.x versions (8.0, 8.1 and 8.2) are only able to run the “micro” version of the DD-WRT firmware (you can find a firmware version feature comparison chart由於硬件限制， 8.x版本（ 8.0 ， 8.1和8.2 ）只能夠運行“微觀”版本的房屋署副署長- wrt固件（你可以找到一個固件版本功能比較圖表 here這裡 ). ） 。 Even so, the micro version of the DD-WRT firmware provides dozens of features, many of which are not available with the default Linksys firmware.即使如此，微型版本的房屋署副署長- wrt固件提供了幾十個特徵，其中有許多是不具備的默認的Linksys固件。

This walkthrough is based on the這是漫遊的基礎上， WRT54G v8.x tutorial on the DD-WRT wiki wrt54g v8.x補習就房屋署副署長- wrt的wiki . 。 The biggest difference between this one and the one on the DD-WRT wiki is that I’ve elaborated a bit, and provided screenshots for each step.最大的差別，這1和1對副署長- wrt Wiki是我已經擬定了一個位，並提供畫面的每個步驟。

Please make sure you understand each step before you complete this tutorial.請確認您了解每一個步驟之前，您完成此教程。 If you’re unsure of anything, please leave a comment and I’ll respond as soon as I can.如果您不確定的話，請留下評論，我將盡快作出回應，我可以。 It is possible to brick (render the router unusable) your device if done incorrectly.是有可能的磚（使路由器無法使用）如果您的設備做了不正確。

1. You’ll need to use a wired ( not wireless ) computer to flash your WRT54G with the DD-WRT firmware.您需要使用有線（ 不無線 ）電腦閃存您wrt54g與房屋署副署長- wrt固件。 Make sure that computer (doesn’t matter if it’sa Mac or PC running Windows or Linux) is plugged in to Port 1 of your router.確保電腦（不要緊，如果是Mac或PC上執行Windows或Linux ）是堵塞在港口1您的路由器。 Unplug all other devices from the router - you can leave the WAN port plugged in to your cable/DSL modem.拔下所有其他設備，從路由器-你可以離開灣港口堵塞到您的有線/ D SL調製解調器。
2. Download the files下載檔案 vxworkskillerGv8-v3.bin vxworkskillergv8 - v3.bin and和 dd-wrt.v24_micro_generic.bin房屋署副署長- wrt.v24_micro_generic.bin to the computer you’re going to use to flash your WRT54G (the one plugged in to Port 1 of your router).到計算機上您要使用的Flash您wrt54g （ 1堵塞在港口1您的路由器） 。
3. You’ll need to set your computer to use the following static IP settings:您需要將您的計算機設置為使用下列靜態IP設置：

   IP Address: 192.168.1.100 IP地址： 192.168.1.100
   Subnet Mask: 255.255.255.0 子網掩碼： 255.255.255.0
   Gateway: 192.168.1.1 網關： 192.168.1.1


OS X Static IP Settings OS X的靜態IP設置


Windows Static IP Settings在Windows靜態IP設置

4. Unplug the power cord from the WRT54G.拔掉電源線從wrt54g 。 Push the Reset button (see image below) while plugging the power cord back in, and hold down the button for about 20 seconds.推動復位按鈕（見下面的圖片） ，而堵塞的電源線早在，按住按鈕約20秒。 Use a pencil or ball-point pen to push and hold the Reset button - it’sa bit recessed and very difficult to push and hold with your finger or fingernail.使用鉛筆或圓珠筆，推動並按住復位按鈕-這是位休會，並就很難推動和進行與您的手指或指甲。


click to enlarge點擊放大

5. Open your browser and enter the address打開您的瀏覽器和輸入地址 http://192.168.1.1 . 。 Use a browser other than Firefox, as issues have been reported with Firefox not being able to flash the device properly.使用瀏覽器除 Firefox以外的其他 ，因為問題已得到報告，與Firefox未能閃光裝置。 I’ve used Safari and Internet Explorer and both had no problems.我已使用Safari和Internet Explorer和都沒有問題。

   You’ll be presented with a Management Mode Firmware Upgrade page.您會得到一個管理模式，固件升級頁。 Click the Choose File button.按一下選擇文件按鈕。


click to enlarge點擊放大

6. Navigate to the vxworkskillerGv8-v3.bin file, select it, and close Choose (or Open if you’re using IE).瀏覽到vxworkskillergv8 - v3.bin的文件，選擇它，並關閉選擇 （或打開如果您使用IE ） 。


click to enlarge點擊放大

7. Make sure that vxworkskillerGv8-v3.bin is listed on the Management Mode Firmware Upgrade page, and click the Apply button.確保vxworkskillergv8 - v3.bin是上市的管理模式，固件升級頁，並點擊應用按鈕。


click to enlarge點擊放大

8. Wait for at least two minutes before you go any further. 等待至少兩分鐘前，你到任何進一步的。 After the 2 minutes is up, if you notice a dialog asking you to reboot the router, do so by unplugging the power cord and plugging it back in again.後2分鐘了，如果您看到一個對話框，要求您重新啟動路由器，這樣做，拔出電源線和堵塞，這回再次在。 If you don’t get a message telling you to reboot the router, wait another 3-4 minutes and then reboot the router.如果您沒有收到訊息，告訴您重新啟動路由器，再等3-4分鐘，然後重新啟動路由器。


click to enlarge點擊放大

9. You should be able to ping 192.168.1.1 (in Linux or OS X open a Terminal and type ping 192.168.1.1 . In Windows open a Command Prompt by clicking Start , selecting Run enter cmd and then type ping 192.168.1.1 ).你應該能ping 192.168.1.1 （在Linux或OS X打開一個終端，並鍵入 ping 192.168.1.1 。在Windows打開一個命令提示符單擊開始 ，選擇運行輸入cmd ，然後鍵入 ping 192.168.1.1 ） 。 If the router doesn’t reply you probably haven’t set your network settings correctly (step #3 above).如果路由器不答复您可能沒有設置您的網絡設置正確（步驟＃ 3段） 。


click to enlarge點擊放大

10. Now it’s time to flash the WRT54G with the DD-WRT firmware.現在的時間，快閃wrt54g與房屋署副署長- wrt固件。 To do so, enter the appropriate command for your Operating System:這樣做，輸入適當的命令，為您的作業系統：

    Windows : (note: Vista users 在Windows ： （注： Vista用戶 will need to install tftp first將需要安裝的TFTP第一 ) enter tftp -i 192.168.1.1 put dd-wrt.v24_micro_generic.bin from the Command Prompt. ）輸入的TFTP我192.168.1.1付諸表決，房屋署副署長- wrt.v24_micro_generic.bin從命令提示符。 Make sure that the dd-wrt.v24_micro_generic.bin file is in the same folder that you’re using the Command Prompt from.作出肯定的是，房屋署副署長- wrt.v24_micro_generic.bin文件是在同一文件夾中您使用的命令提示符。 For example, if you downloaded dd-wrt.v24_micro_generic.bin to your Desktop, make sure the Command Prompt reads C:\Documents and Settings\ your-user-name \Desktop> - where your-user-name is your Windows user name.例如，如果您下載的房屋署副署長- wrt.v24_micro_generic.bin到您的桌面上，請務必命令提示符，內容為C ： \文件和設置\ 您的用戶名 \桌面> -在哪裡你的用戶名稱是您的W indows使用者名稱。

    Linux : enter tftp -m octet 192.168.1.1 -c put dd-wrt.v24_micro_generic.bin at your shell/terminal. Linux作業系統 ：輸入的TFTP -米八位組192.168.1.1 - C的付諸表決，房屋署副署長- wrt.v24_micro_generic.bin在你的shell /終端。 Note: if you get the the message error code 3 while trying to flash it, try atftp.注意：如果您得到的訊息錯誤碼三 ，而試圖閃光，嘗試atftp 。 The aftp command is: atftp –option “mode octet” –verbose -p -l dd-wrt.v24_micro_generic.bin 192.168.1.1該aftp命令是： atftp選擇 “ 模式八位組 ” -詳細-升房屋署副署長- wrt.v24_micro_generic.bin 192.168.1.1

    OS X : enter tftp -e 192.168.1.1 From the tftp> prompt enter put dd-wrt.v24_micro_generic.bin OS X的 ：輸入的TFTP娥192.168.1.1從的TFTP >提示輸入付諸表決，房屋署副署長- wrt.v24_micro_generic.bin

    Make sure that the dd-wrt.v24_micro_generic.bin file is in the same folder that you’re using the Terminal from.作出肯定的是，房屋署副署長- wrt.v24_micro_generic.bin文件是在同一個文件夾，您所使用的終端。 For example, if you downloaded dd-wrt.v24_micro_generic.bin to your Downloads folder, make sure you’re using the Terminal prompt from /Users/ your-user-name /Downloads - where your-user-name is your Mac user name.例如，如果您下載的房屋署副署長- wrt.v24_micro_generic.bin到您的下載文件夾，請確保您使用的終端機的提示/用戶/ 你的用戶名稱 /下載-您的用戶名稱是您的M ac使用者名稱。


click to enlarge點擊放大

11. The file will be transferred and automatically installed.該文件將被轉移和自動安裝。 Once this is done, DD-WRT will automatically boot.一旦這樣做，房屋署副署長- wrt會自動開機。 After about a minute, you can browse DD-WRT on your router at後約一分鐘，您可以瀏覽房屋署副署長- wrt就在您的路由器 http://192.168.1.1 . 。


click to enlarge點擊放大

12. If you browse away from the main page, you’ll be prompted for a user name and password.如果您瀏覽遠離主網頁，系統會提示您一個用戶名和密碼。 The default user name is: root and the default password is: admin .默認的用戶名是： 根和默認的密碼是： 政府當局 。 To change the user name and/or password (a very good idea!!) - select the Administration tab and then the Management tab.要更改用戶名和/或密碼（一個很不錯的主意！ ） -選擇，政府當局標籤，然後管理標籤。 Enter your new user name and/or password in the spaces provided, and click the Save button at the bottom of the screen.輸入新的用戶名和/或密碼在該位提供，並點擊保存按鈕，在屏幕的底部。


click to enlarge點擊放大

13. When you navigate away from the Management tab, you’ll be prompted to enter your user name and password again.當您瀏覽脫離管理選項卡，系統會提示您輸入您的用戶名和密碼。 Enter your new user name and/or password to continue.輸入新的用戶名和/或密碼，以繼續進行。