How to jailbreak your iPod Touch running the 2.1 firmware (OS X)脱獄する方法をお使いのiPodタッチ2.1を実行しているファームウェア( OS X版)

by Ross McKillop on September 13, 2008 ロスmckillop 上で 2008年9月13日

マックのiPod / iphone

This tutorial will guide you through the steps to jailbreak your first generation iPod Touch running the 2.1 firmware, in OS X. NOTE: this will not work on the new 2nd generation iPod Touch devices.このチュートリアルでは、ガイドの手順を実行して脱獄を介して第一世代 iPodタッチして2.1を実行しているファームウェアは、 OS Xの注:これ動作しませんは、新しい第2世代iPodタッチデバイスです。

  1. First things first, downloadまず行うことの第一に、ダウンロード QuickPwn 1.1 quickpwn 1.1 .です。 Open the .dmg file and drag it to your Applications folder (or Desktop).オープンします。 dmgファイルをドラッグして、アプリケーションのフォルダ(またはデスクトップ) 。 Do not run the file from inside the .dmg.内部からのファイルを実行しないようにします。 dmgです。

  2. click to enlargeをクリックして拡大表示する

  3. Run QuickPwn, and click OK to agree to the warning message. quickpwnを実行し、内容に同意して[ OK ]をクリック警告メッセージが表示されます。
  4. Connect your iPod Touch when prompted.プロンプトが表示されたら接続してiPodのタッチです。
  5. Decide if you’d like to change the boot and restore logos (I opted for yes).決めることを希望される場合は、ブートと復元のロゴを変更する(私を受け取らないように設定はい) 。
  6. QuickPwn will search your drive for the correct file, and then build a new IPSW for you. quickpwnは、ドライブを検索して、適切なファイルを構築すると入力し、新しいipswです。 This can take a minute or two.この処理には約1分または2つです。

  7. click to enlargeをクリックして拡大表示する

  8. During the process you’ll be prompted to enter your password.この過程でするように指示を入力してください。パスワードを入力します。
  9. Next you’ll be prompted to power off your iPod Touch.次の電源をオフにするように指示してiPodのタッチです。 Hold down the Power button, and then “swipe” the slide to power off arrow at the top of your iPod Touch screen 電源ボタンを押したままにする、と入力し、 "強打"のスライドを矢印の上部に電源を切りますと、 iPodのタッチスクリーン

  10. click to enlargeをクリックして拡大表示する

  11. Now you’ll be prompted to hold down the Power button and the Home button at the same time.今すぐするように指示を押したままクリックして電源ボタンを押すと、それと同時にホームボタンをクリックします。 Then you’ll be prompted to let go of one button and continue to hold the other.それからするように指示させていくのを続行を保持する1つのボタンを押すと、他のです。 Follow the instructions carefully.画面の指示注意が必要です。

  12. click to enlargeをクリックして拡大表示する

  13. If you didn’t manage to hold and hold/release the buttons at the right time(s), you’ll be presented with a “Failed to enter DFU mode”.覚えがない場合は管理を保持するとホールド/リリースのボタンは、右側の時間(秒) 、お客様に提示して" dfuモードを入力するに失敗しました" 。 From here, just click Yes to try again.ここからは、 [ はい ]をクリックやり直してください。
  14. Once you get it correctly, QuickPwn will do its thing and jailbreak your iPod Touch.一度に得ることが正しければ、そのことはquickpwnと脱獄してiPodのタッチです。

  15. click to enlargeをクリックして拡大表示する

  16. Now that the files have been uploaded to your iPod Touch, it will reboot itself.今すぐに、これらのファイルにタッチをiPodにアップロードされて、それは自分自身を再起動します。 Give it time to power back on.パワー先頭に時間を与えることです。
  17. You’ll be presented with a “success” screen, possibly before your iPod Touch has finished booting.提示するように、 "成功"の画面で、可能性の起動が完了する前に、 iPodのタッチです。 Allow it to completely start up before you exit QuickPwn.許可することを完全に終了する前に、スタートアップquickpwnです。

  18. click to enlargeをクリックして拡大表示する

  19. Once your iPod has completely started up, you’ll notice 2 new icons on your Springboard - Cydia and Installer .お使いのiPod一度は完全に立ち上げ、 2つの新しいアイコンがいることに気づくして飛び板-c ydiaとンストーラです。 Use those apps to install software etc on your newly jailbroken iPod Touch.これらのアプリを使用して新たにソフトウェアをインストールする等をjailbroken iPodのタッチです。

  20. click to enlargeをクリックして拡大表示する

Related Posts: 関連記事:
  • How to enable or disable WiFi on your Jailbroken iPhone or iPod Touch with one tap WIFI使用を有効または無効にどのようにタッチして1つまたはiPod jailbroken iphoneタップ
  • A step by step guide to installing 3rd party software on your iPod TouchステップバイステップガイドをサードパーティのソフトウェアをインストールするタッチをiPodに転送する
  • How to jailbreak your iPod Touch running the 2.0 firmware in OS X脱獄する方法をお使いのiPodタッチ2.0のファームウェアを実行しているOS Xの
  • How to take screenshots of your iPhone or iPod Touch screenどうやってiphoneまたはiPodのスクリーンショットをしてタッチスクリーン
  • How to jailbreak your iPod Touch running the 2.0, 2.0.1 or 2.0.2 firmware in Windows脱獄する方法をお使いのiPodタッチを実行している2.0 、 2.0.1または2.0.2のファームウェアをWindows
  • Get Simple Help tutorials just like this one in your email inbox every day - for free!チュートリアルと同じように、この1つの簡単なヘルプお使いのメールの受信ボックスに毎日-を無料で! Just enter your email address below:お客様の電子メールアドレスを入力するだけでください:

    You can always opt out of this email subscription at any time.オプトアウトすることができます。この電子メールは常に、いつでも購読します。

    { 0 comments… 0コメント… add one now今すぐ追加する }

    Leave a Commentコメントを残す

    You can use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong> これらのHTMLタグを使用することができますと属性: <aのhref=のtitle= <abbrのtitle= <cite> <acronymのtitle= <b>ダウンロードの<code> <blockquote cite=""> <del datetime="">の<em> <i>て<strike> <strong> <q cite="">