This tutorial will guide you through the steps to jailbreak your first generation iPod Touch running the 2.1 firmware, in OS X. NOTE: this will not work on the new 2nd generation iPod Touch devices.本教程將引導您通過步驟越獄您的第一代 iPod觸摸運行2.1固件，在OS X 注：這是不會的工作，對在新的第二代iPod觸摸裝置。
- First things first, download第一件事：第一，下載 QuickPwn 1.1 quickpwn 1.1 . 。 Open the .dmg file and drag it to your Applications folder (or Desktop).打開。 DMG的文件，並將它拖曳到您的應用程序文件夾（或桌面） 。 Do not run the file from inside the .dmg. 不運行該文件內。 DMG的。
- Run QuickPwn, and click OK to agree to the warning message.運行quickpwn ，並點擊確定同意將警告訊息。
- Connect your iPod Touch when prompted.您的iPod連接觸摸提示時。
- Decide if you’d like to change the boot and restore logos (I opted for yes).決定如果您想要更改啟動和恢復的標誌（我選擇為YES時） 。
- QuickPwn will search your drive for the correct file, and then build a new IPSW for you. quickpwn將搜索您的硬盤，為正確的文件，然後建立一個新的ipsw給你。 This can take a minute or two.這可能會花上一兩分鐘。
- During the process you’ll be prompted to enter your password.在這個過程中會提示您輸入您的密碼。
- Next you’ll be prompted to power off your iPod Touch.接下來，您將被提示斷電您的iPod觸摸。 Hold down the Power button, and then “swipe” the slide to power off arrow at the top of your iPod Touch screen按住電源按鈕，然後“刷卡”的幻燈片，以切斷電源箭頭上方您的iPod觸控式螢幕
- Now you’ll be prompted to hold down the Power button and the Home button at the same time.現在，您會提示按住電源按鈕和主頁按鈕，在同一時間內。 Then you’ll be prompted to let go of one button and continue to hold the other.然後系統會提示您放過一個按鈕，並繼續進行其他。 Follow the instructions carefully.按照指示小心。
- If you didn’t manage to hold and hold/release the buttons at the right time(s), you’ll be presented with a “Failed to enter DFU mode”.如果您沒有管理，以持有及持有/釋放按鈕，在正確的時間（秒） ，您將得到一個“未能進入dfu模式” 。 From here, just click Yes to try again.從這裡，只要按一下鍵 ，然後再試一次。
- Once you get it correctly, QuickPwn will do its thing and jailbreak your iPod Touch.一旦您獲得正確的話， quickpwn將盡自己的事，越獄您的iPod觸摸。
- Now that the files have been uploaded to your iPod Touch, it will reboot itself.現在，該文件已上載至您的iPod觸摸，它將重新啟動本身。 Give it time to power back on.給它時間，就回到權力。
- You’ll be presented with a “success” screen, possibly before your iPod Touch has finished booting.您將得到一個“成功”的畫面，可能是之前，您的iPod觸摸已完成開機。 Allow it to completely start up before you exit QuickPwn.允許它完全啟動之前，您退出quickpwn 。
- Once your iPod has completely started up, you’ll notice 2 new icons on your Springboard - Cydia and Installer .一旦你的iPod已經完全啟動了，您會發現2個新的圖標在您的跳板-c ydia和安裝。 Use those apps to install software etc on your newly jailbroken iPod Touch.使用這些應用程序安裝軟件等您的新jailbroken iPod的觸摸。
{ 0 comments… （ 0評論… add one now新增1現在 } ）
Leave a Comment留下意見