Here we go again.在這裡，我們又來了。 Another new firmware, another jailbreak tutorial.另一項新的固件，另一越獄教程。 This one will guide you through the process of jailbreaking your iPod Touch running the 2.1 firmware.這將引導您完成的過程中jailbreaking您的iPod觸摸運行2.1固件。
If you’re running an earlier version of the iPod Touch firmware, you’ll want to use this tutorial:如果您正在運行較早版本的iPod觸摸固件，您需要使用本教程： How to jailbreak your iPod Touch running the 2.0, 2.0.1 or 2.0.2 firmware in Windows如何越獄您的iPod觸摸運行2.0 ， 2.0.1或2.0.2固件在Windows instead.代替。 Otherwise, keep reading.否則，隨時閱讀。
- Head over to the頭向 iPhone-Dev site iPhone ，開發網站 and download Window QuickPwn 2.1.和下載窗口QuickPwn 2.1 。 Save the file to your desktop, and launch it from there.將文件保存到桌面上，推出了從那裡。
- Make sure your iPod Touch is plugged in, and then click the “next” arrow (bottom right corner of the screen).請確保您的iPod觸摸插入，然後單擊“下一個”箭頭（右下角的屏幕） 。
- QuickPwn should auto-detect your ipsw file. QuickPwn應自動檢測您的ipsw文件。 Assuming it does, skip ahead to step #4 below.假如確實如此，跳至步驟＃ 4所示。 If for any reason it doesn’t, follow the instructions below to find and select it.如果因為任何原因，它沒有，按照下列指示找到並選中它。
Windows Vista users Windows Vista用戶
Navigate to the C:\Users\ your-user-name \AppData\Roaming\Apple Computer\iTunes\iPod Software Updates\ folder (where your-user-name is the user name you use in Windows Vista).瀏覽到 C ： \ 用戶\ 你的用戶名 \ 應用程序數據\漫遊\蘋果電腦公司\的iTunes \ iPod軟件更新\文件夾中 （如您的用戶名是用戶名您使用Windows Vista中） 。 Select the 2.1 ipsw file (there may be more than one ipsw file to choose from).選擇2.1 ipsw文件（可能有一個以上的ipsw文件選擇） 。 The file you want to select is iPod1,1_2.1_5F137_Restore.ipsw .該文件要選擇是iPod1 ， 1_2.1_5F137_Restore.ipsw 。 Click the Open button.按一下打開按鈕 。
If you’re unable to see the AppData folder, you need to如果您無法看到應用程序數據文件夾，您需要 enable the ability to View Hidden Files and Folders使能力查看隱藏文件和文件夾 . 。
Windows XP users Windows XP用戶
Navigate to the C:\Documents and Settings\ your-user-name \Application Data\Apple Computer\iTunes\iPod Software Updates\ folder (where your-user-name is the user name you use in Windows XP).瀏覽到 C ： \ 文件和設置\ 你的用戶名 \ Application Data \ 蘋果電腦公司\的iTunes \ iPod軟件更新\文件夾中 （如您的用戶名是用戶名您使用Windows XP中） 。 Select the 2.1 ipsw file (there may be more than one ipsw file to choose from).選擇2.1 ipsw文件（可能有一個以上的ipsw文件選擇） 。 The file you want to select is iPod1,1_2.1_5F137_Restore.ipsw .該文件要選擇是iPod1 ， 1_2.1_5F137_Restore.ipsw 。 Click the Open button.按一下打開按鈕 。
If you’re unable to see the Application Data folder, you need to如果您無法看到Application Data文件夾 ，您需要 enable the ability to View Hidden Files and Folders使能力查看隱藏文件和文件夾 . 。
- You’ll (probably) want to add both Cydia and Installer .你會（可能）要新增兩個蘋果蠹和安裝程序。 Changing the boot logo is a personal preference.更改啟動的標誌是個人喜好。 I like the Apple boot logo, so I leave Replace boot logos unchecked.我喜歡蘋果啟動的標誌，所以我離開替換啟動的標誌聽之任之。 Again, personal decision, it’s up to you.此外，個人決定，就看您的。 Click the “next” button when you’re ready to continue.點擊“下一步”按鈕，當您準備好繼續下去。
- Again you’ll be prompted to confirm our iPod Touch is connected.同樣會提示您確認我們的iPod觸摸連接。 And again, make sure it is.再次，確認它是。 Click the “next” button to continue.點擊“下一步”按鈕繼續。
- Next comes the only part that’sa tiny bit tricky, though it’s certainly not difficult, you just need to time things well.接下來是只有部分國家都點點麻煩，但肯定不是困難，你只需要時間的事情。 You’ll be prompted to hold down the Home button on your iPod Touch, then both the Home and Power buttons, then just the Home button again.系統會提示按住主頁按鈕，您的iPod觸摸，然後雙方家庭和電源按鈕，然後僅僅是主頁按鈕。 Worst case, you’ll have to repeat this step.最壞的情況下，您可以重複這一步驟。
- Once you’ve held the buttons down in the correct order for the correct periods of time, the jailbreaking process will begin.一旦你的按鈕舉行了正確的順序正確的時間， jailbreaking進程的開始。
- Your iPod will continue to install software even when the “you’re done” screen appears.您的iPod將繼續安裝軟件即使在“大功告成”畫面。 Give it a minute or three to finish and restart.給它一分鐘或三年完成並重新啟動。
- After your iPod has completely started up, you’ll notice 2 new icons on your Springboard - Cydia and Installer .在您的iPod已經完全啟動，您會發現2個新的圖標在您的跳板-蘋果蠹和安裝程序。 They might not be on the first screen of your Springboard, especially if you have a lot of apps already installed.他們可能沒有的第一個畫面上的跳板，尤其是如果您有很多的應用程序已經安裝。 Scroll over to the last screen and you should find them there.滾動到屏幕上，你應該找到它們的存在。
{ 7 comments… read them below or （ 7條意見...閱讀低於或 add one添加一個 } ）
Hi Ross; very well explained.您好羅斯;很好解釋。 Do you know where can I find apache and PHP for installer 4?你知道我在哪裡可以找到Apache和PHP的安裝4 ？
Thanks,謝謝，
rather reluctant to try this since nobody seems to have posted anything here.而不願意嘗試這一點，因為沒人似乎已經在這裡張貼什麼。
thank you for explaining it clearly i have one problem though.感謝您解釋很清楚我有一個問題了。
on step five it says there is an unhandled exeption error and wont let me continue.在步驟5它說，有未處理的exeption錯誤和習慣讓我繼續下去。 my ipod tocuh is plugged in and i have itunes running but then itunes seems to crash when i try to push the blue arrow.我的iPod插入tocuh是在和我上運行的iTunes版本的iTunes ，但當時似乎隨時都會崩潰當我嘗試把藍色的箭頭。
please help請幫助
i realised im meant to have itunes closed but it still comes up with the same error and when i click more details it says something about JIT debugging????我意識到免疫意味著讓iTunes關閉，但它仍然是與相同的錯誤，當我按一下更多的細節說一下JIT調試？ ？ ？ ？
HELP幫助
Dash -短跑-
Do you have one of the new iPod Touch models?你有一個新的iPod的觸摸模式？
Dash -短跑-
And, are you using iTunes 8?而且，你使用iTunes 8 ？
Thanks a lot!多謝！ Worked great!工作太棒了！
Leave a Comment發表您的評論