How to fix the “We apologize for the inconvenience, but Windows did not start successfully” error如何解決： “我們帶來的不便深表歉意，但是Windows並沒有成功啟動”錯誤

This is a guest post by Aseem Kishore, the lead blogger for這是一個住客後的Aseem紀，帶頭的博客 HelpDeskGeek.com , which focuses on providing Help Desk tips to IT Professionals. ，重點是提供服務台提示IT專業人員。 If you like this post, please subscribe to his如果你喜歡這個職位，請訂閱他 RSS feed RSS種子 . 。

Are you getting this error message when you try to start up Windows:您是否獲得這個錯誤訊息當您嘗試啟動安裝Windows ：

We apologize for the inconvenience, but Windows did not start successfully.我們很抱歉給您帶來的不便，但是Windows並沒有成功啟動。 A recent hardware or software change might have caused this.最近的硬件或軟件的變化可能造成這一點。

If so, your Windows system files are probably corrupt or there is something wrong with your hard drive (bad sectors, etc.) Luckily, it’s usually an error that can be fixed without having to reinstall the Windows operating system!如果是這樣，您的Windows系統文件可能是腐敗的，或者有什麼不對您的硬盤驅動器（壞扇區等） ，幸運的是，它通常是一個錯誤，可固定，而不需要重新安裝Windows操作系統！

I’ve seen this error several times in the last couple of years working as in IT support and each time it was fixed in a different way.我見過這個錯誤好幾次在過去的幾年中工作的IT支持和每次它固定在一個不同的方式。 Here are some steps you can take to try and fix the problem.這裡有一些步驟，你可以嘗試解決這一問題。

Method 1 – Repair Windows via Recovery Console by running CHKDSK方法1 -修復W indows通過故障恢復控制台的運行C HKDSK

My first suggestion would be to restart your computer into the Recovery Console mode and run CHKDSK with the repair option to make sure there are no errors on your hard disk.我的第一個建議是重新啟動電腦，進入故障恢復控制台模式和運行 CHKDSK的修復選項，以確保沒有任何錯誤在您的硬盤上。

In order to get into the Recovery Console in Windows XP, you need to put in your Windows installation CD and press any key when it says boot from CD.為了進入Windows XP的恢復控制台，您需要把您的Windows安裝CD ，然後按任意鍵時說，從CD啟動。

Now in the XP Professional Setup screen, press R to choose the Repair a Windows XP installation using the Recovery Console option.現在在XP專業版安裝屏幕上，按R選擇修復Windows XP安裝使用故障恢復控制台選項。

click to enlarge點擊放大

Now you need to choose the installation that you want to run the recovery console too on, usually you can just type 1 .現在，你需要選擇安裝，你要運行故障恢復控制台也對，通常您只需鍵入 1 。 Enter the password for the local Administrator account on the computer and press Enter .輸入密碼的本地管理員帳戶的計算機上，並按下Enter鍵。

click to enlarge點擊放大

Now go ahead and type in the command CHKDSK /r at the command prompt to run the disk check:現在繼續進行並輸入命令的CHKDSK /住宅在命令提示符下運行磁盤檢查：

click to enlarge點擊放大

Method 2 – Do a Repair installation of Windows方法2 -請不要修復安裝W indows

In Method 1, we ran CHKDSK through the Recovery Console to try and repair any errors that may have been on the hard disk.方法1中，我們遇到的CHKDSK通過故障恢復控制台，試圖修復任何錯誤，可能已經在硬盤上。 In Method 2, we will do a repair installation of Windows, which basically replaces all of your system files without deleting any of your data.在方法2 ，我們將盡修復安裝的Windows ，基本上取代了所有的系統文件而不刪除您的任何數據。 The OS is reinstalled, but all data is left intact.操作系統重新安裝，但所有的數據是原封不動。

After doing a repair install, you will have to reapply all Windows Updates.在做了修復安裝，你將不得不重新所有的Windows更新。 For this, you would put in your XP CD like before, boot to it by pressing a key when you see Press any key to boot from CD .為此，您將在您的XP光盤像以前一樣，啟動它的緊迫的一個關鍵當你看到按任意鍵從光盤啟動 。

From the menu of options above, press Enter instead of pressing R. This is a little counter-intuitive, but you have to choose the option to setup Windows XP.從菜單的選擇上面， 按下 Enter鍵，而非緊迫的河這是一個什麼反直覺的，但你必須選擇安裝的Windows XP 。

Press F8 to accept the license agreement and then press R to choose the Repair the selected Windows XP installation option. 按 F8以接受許可協議然後按R選擇修復選定的Windows XP安裝選項。

click to enlarge點擊放大

Note that it will look like Windows is reinstalling the operating system fresh, but it is not!請注意，它看起來就像是重新安裝的Windows操作系統新鮮，但它並不是！ It’s just replacing all of the Windows system files, so your data will not be lost.這只是取代所有的Windows系統文件，使您的數據不會丟失。

click to enlarge點擊放大

Always make sure that you are using the same XP CD that came with computer originally or the repair may fail in the middle!務必讓您使用的是同樣的XP光盤附帶的計算機最初或修復可能會失敗中！ Allow the install to complete and then restart your computer and see if you can log on.允許安裝才能完成，然後重新啟動計算機，看看您是否可以登錄。 Your desktop settings may be back to their defaults because of the repair.您的桌面設置可能會回到他們的默認，因為修理。

Method 3 – Use Last Known Good Configuration option方法3 -使用最後一次正確的配置選項

A final thing you can try is to press F8 when the computer is starting to boot up and choose Last Known Good Configuration from the Windows XP Advanced Options menu:最後你可以嘗試是按下 F8當計算機已開始啟動，並選擇最後一次正確的配置從Windows XP高級選項菜單：

click to enlarge點擊放大

Those are basically your three options for the “Windows did not start successfully error”.這些基本上都是您的三個選項中的“ Windows並沒有成功啟動的錯誤” 。 Last resort would be to simply reinstall Windows, but that means you lose your data.不得已將只需重新安裝Windows ，但這意味著你失去您的數據。 You can also try to log into safe mode and if you can, that means you can try to do a system restore by going to the command prompt and typing in the following command:您也可以嘗試登錄到安全模式，如果你不能，這意味著你可以嘗試進行系統恢復進入命令提示符，輸入下面的命令：

%systemroot%\system32\restore\rstrui.exe ％ systemroot ％ \ system32 \恢復\ rstrui.exe

Now follow the instructions on to choose an earlier state to restore your computer back to.現在，按照指示選擇一個以前的狀態，將電腦還原回。 Hope that helps someone fix their problems!希望有人幫助解決他們的問題！