How to resize Linux partitions using GParted 리눅스 파티션을 사용하여 크기를 조정하려면 어떻게 GParted

by Ken Murray on November 4, 2008 머레이 2008년 11월 4일에 의해

리눅스

Sometimes you want to change your partition layout after you’ve been using your system for awhile. 잠시 후 시스템을 사용해 왔습니다 가끔은 자신의 파티션 레이아웃을 변경하고 싶습니다. One great too for this job is GParted. 하나도이 직업에 대한 GParted 좋다. In this tutorial I’ll show you how to resize partitions using the 이 튜토리얼에서는 크기를 조절하는 방법을 사용하여 파티션을 보여 드릴게요 GParted Live CD GParted 라이브 CD .

  1. Once you download it and burn it to a disc, just boot from it and you should see a screen like this: 일단 당신이 그것을 디스크에, 그것에서 부팅 태워 그리고 당신이 같은 화면이 나타납니다 다운로드 :

  2. click to enlarge 클릭하시면 확대됩니다

  3. I prefer to run GParted with Safe Graphic Settings . 난 안전 그래픽 설정과 함께 GParted 실행하는 것을 선호합니다. Just use the up and down arrows to select the mode you want. 그냥 원하는 모드를 선택하려면 위쪽 및 아래쪽 화살표를 사용합니다.

  4. click to enlarge 클릭하시면 확대됩니다

  5. When prompted to select your keymap, most users will just press Enter and keep the default. 키맵을 선택하라는 메시지가하면, 대부분의 사용자는 그냥 Enter 키를되며 기본값을 유지합니다.

  6. click to enlarge 클릭하시면 확대됩니다


    click to enlarge 클릭하시면 확대됩니다

  7. Next you see some information about how to reconfigure the graphical environment. 옆에있는 그래픽 환경을 재구성하는 방법에 대한 몇 가지 정보를 볼 수있습니다.

  8. click to enlarge 클릭하시면 확대됩니다

  9. Then the live system starts. 다음 라이브 시스템을 시작합니다.

  10. click to enlarge 클릭하시면 확대됩니다

  11. I prefer to run GParted in a lower screen resolution. 내가 GParted 낮은 화면 해상도에서 실행하는 것을 선호합니다. Right-click anywhere on the desktop background and select Fluxbox Menu -> Exit X . 바탕 화면의 배경을 아무 곳이나 마우스 오른쪽 버튼으로 클릭하고 선택하십시오 - fluxbox 메뉴 -> 출구 엑스.

  12. click to enlarge 클릭하시면 확대됩니다

  13. At the command prompt type sudo Forcevideo and press Enter . 명령 프롬프트에서 sudo를 Forcevideo 키를 입력합니다.

  14. click to enlarge 클릭하시면 확대됩니다

  15. I usually choose 800×600 and 16 bit color. 나는 보통 800 × 600 및 16 비트 색상을 선택합니다.

  16. click to enlarge 클릭하시면 확대됩니다

  17. That’sa little better. 이것도 좀 나아요. Notice how GParted shows a graphical representation of the partitions on your hard disk. 통지 방법 GParted 하드 디스크에있는 파티션의 그래픽 표현을 보여줍니다.

  18. click to enlarge 클릭하시면 확대됩니다

  19. In this example I’m going to shrink my main Linux partition to make my Swap partition larger. 이 예제에서는 내가 큰 스왑 파티션을 만들어 내 주요 리눅스 파티션을 축소하는거야. Start by right-clicking on /dev/hda1 and selecting Resize/Move . 오른쪽 - / dev/hda1하고 선택 크기를 클릭 / 이동하여 시작하십시오.

  20. click to enlarge 클릭하시면 확대됩니다


    click to enlarge 클릭하시면 확대됩니다

  21. You can drag the arrows at the right or left of the partition to resize it, or just type the values you want in the boxes below. 당신은 오른쪽에있는 화살표를 드래그하거나 파티션의, 아니면 그냥 아래 상자에서 원하는 유형의 가치 크기를 떠났다. In this example I chose to shrink the partition by 261 MB. 이 예제에서는 261메가바이트하여 파티션을 축소하기로 결정했습니다.

  22. click to enlarge 클릭하시면 확대됩니다

  23. Click Resize/Move and you are back at the main GParted screen. 크기를 클릭 / 이동하고 다시 메인 화면에서 GParted있다. Notice the information in the lower pane of the window showing the pending operation. 통지 정보 창에서 보류중인 작업을 보여주는 패널의 하단에있다.

  24. click to enlarge 클릭하시면 확대됩니다

  25. Next, Right-click on the /dev/hda2 extended partition and select Resize/Move . 다음, 오른쪽 - / dev/hda2 확장 파티션의 크기를 선택 / 이동을 클릭합니다.

  26. click to enlarge 클릭하시면 확대됩니다

  27. This window is very similar to the earlier one. 이 창에서 이전 하나 매우 비슷합니다.

  28. click to enlarge 클릭하시면 확대됩니다

  29. I dragged the left edge of the partition all the way to the left in order to consume all the free space, then clicked Resize/Move . 그럼, 난 크기를 클릭한 / 파티션의 왼쪽 가장자리에있는 모든 여유 공간을 소모하는 순서를 왼쪽으로 이동 모든 방법을 끌고있다.

  30. click to enlarge 클릭하시면 확대됩니다

  31. Next, right-click on /dev/hda5 , the linux-swap partition and select Resize/Move . 다음, 오른쪽 - / dev/hda5를 클릭 리눅스 - 스왑 파티션 크기를 선택 / 이동합니다.

  32. click to enlarge 클릭하시면 확대됩니다

  33. By now this should look familiar. 지금이 낯이 익은데한다.

  34. click to enlarge 클릭하시면 확대됩니다

  35. I again dragged the left edge of the partition all the way to the left in order to consume all the free space, then clicked Resize/Move . 내가 다시 크기를 클릭한 / 파티션의 왼쪽 가장자리에있는 모든 여유 공간을 소모하는 순서를 왼쪽으로 이동 모든 방법을 끌고있다.

  36. click to enlarge 클릭하시면 확대됩니다

  37. Review the three pending operations in the bottom pane of the window. 창 맨 아래의 패널에서 검토중인 작업 3. If they are correct, click Apply . 만약 그들이 올바른지 다음 적용을 누릅니다.

  38. click to enlarge 클릭하시면 확대됩니다

  39. This is your last chance to bail out. 이번이 마지막 기회가 보석으로 풀려나있다. If you’re sure, click Apply . 만약 당신이 다음 적용을 누릅니다있을 거라 확신하고있다.

  40. click to enlarge 클릭하시면 확대됩니다

  41. When you see this window, go for coffee. 때, 커피를 마시러 갈이 창을 볼 수있습니다. It’s probably going to take a while. 아마 좀 걸릴거야.

  42. click to enlarge 클릭하시면 확대됩니다

  43. Once GParted is finished, close it, shutdown the live image, remove the CD and boot back into your usual Linux installation. 일단 GParted, 주변, 셧다운 라이브 이미지, 평소 리눅스 설치에 CD를 제거하고 다시 부팅이 완료됩니다.
Related Posts: 관련 게시물 :
  • How to resize images using The Gimp 김프를 사용하여 이미지 크기를 조정하려면 어떻게
  • How to dual boot your Asus Eee PC 900 with Windows XP and Ubuntu Linux 듀얼 부팅하는 방법에 귀하의 아수스 Eee PC에 윈도우 XP와 우분투 리눅스와 함께 900
  • How to quickly resize columns in Finder Finder에서 열 크기를 얼마나 빨리
  • How to resize twhirl when the sizing “corner” is off-screen (OS X) 어떻게하면 크기 "코너"이다 - 화면 (OS X의) 크기를 twhirl
  • How to resize multiple images in one step using Windows Windows를 사용하는 방법을 한 단계에서 여러 개의 이미지의 크기를
  • Get Simple Help tutorials just like this one in your email inbox every day - for free! 귀하의 이메일받은 편지로 매일 - 자유에 대한 간단한 도움말 튜토리얼이 하나처럼 들어가! Just enter your email address below: 바로 아래에 귀하의 이메일 주소를 입력 :

    You can always opt out of this email subscription at any time. 당신은 항상 언제든지이 이메일 구독의 선택을 취소할 수있습니다.


    Bookmark and Share 즐겨찾기 및 공유

    { 0 comments… (0 코멘트 ... add one now 지금 하나 추가 } )

    Leave a Comment 코멘트를 남겨주세요

    You can use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong> 이러한 HTML 태그와 특성 : title="">은 <a href="" 사용할 수있습니다 <abbr title=""> <acronym title="">의 <b> <blockquote cite=""> <cite>의 <code> <del datetime="">의 <em>가 <i> <q cite=""> <strike>의 <strong>