Somewhat similar to the有點類似 Using Boot Camp to install Vista on your Mac利用Boot Camp來安裝Vista在您的Mac walkthrough, this tutorial will take you every step of the way through installing Microsoft Windows 7 on your Intel Mac (running 10.5 or later), using Boot Camp.演練中，本教程將帶您每一個步驟的方式，通過安裝Microsoft Windows 7在您的英特爾的Mac（運行10.5或更高版本），使用Boot Camp的。
Note: if you'd rather not dual boot OS X and Windows 7, you can always 注意：如果您不希望雙啟動OS X和Windows 7，您可以隨時 install Windows 7 in a virtual environment using Parallels Desktop安裝Windows 7在虛擬環境中使用Parallels桌面 . 。
To install Windows 7 on your Mac using Boot Camp you will need the following:要安裝Windows 7在你的Mac使用Boot Camp的，你需要以下內容：
- All firmware updates installed on your Mac (use Apple Button -> Software Update… to check)所有固件更新您的Mac上安裝（使用蘋果按鈕- “軟件更新...查看）
- A Windows 7 installation DVD在Windows 7安裝DVD
- Your OS X Leopard installation DVD你的OS X Leopard的安裝DVD
- At least 10GB of empty hard drive space on your Mac (you can probably get away with less but you'll have almost no room to install anything other than the OS)至少有10GB的硬盤驅動器的空白空間，在您的Mac（你也許可以逃脫較少，但你得幾乎沒有空間來安裝以外的其他任何操作系統）
- An hour if all goes well, up to 5 hours if not一個小時，如果一切順利，到5個小時，如果不
- Though not absolutely required, it's a VERY good idea to have a complete and up to date Time Machine backup of OS X – it really came in handy for me.雖然不是絕對必需的，這是一個很好的主意，有一個完整的和最新的Time Machine備份的OS X -真的派上了用場我。 Because part of the process involves partitioning your drive, there's always the distinct chance something will go wrong and everything will be wiped out.由於這一進程的一部分涉及您的驅動器分區，永遠有不同的機會事情可能出錯，一切都將消失。
- Patience, possibly a great deal of it.耐心，可能是很大的了。 Having a book handy will also help kill time during the partitioning, installing etc).有一本書也將有助於方便消磨時間，在分區，安裝等）。
Installing Windows 7 via Boot Camp安裝Windows 7通過新兵訓練營
- Here goes.在此範圍。 First thing – close absolutely every open program you can.第一件事-關閉所有打開的程序絕對可以。 That includes those things running in the Apple Menu that you always forget about.這包括那些東西運行在Apple菜單，你總是忘了。 Don't worry about killing the Dock or Dashboard – having those running is fine.不要擔心殺死Dock或儀表板-有那些運行良好。
- Now open a Finder and navigate to Applications -> Utilities and double-click Boot Camp Assistant .現在打開一個Finder，並導航到應用程序 - >“ 實用程序 ，然後雙擊新兵訓練營助手 。
- Click Continue on the initial Introduction screen.點擊繼續在初始言屏幕。 Ignore the fact that it doesn't mention Windows 7 as a possible OS to install.忽視這樣一個事實，它沒有提到的Windows 7作為一個可能的操作系統安裝。
- Now you have to decide how much space you want to allocate to Windows 7.現在您必須決定多少空間要分配到Windows 7。 You might be able to get away with going as low as 6GB, but I would highly advise against it.你也許能逃脫會低至6GB的，但我會極力反對的意見。 You'll have almost no space left over to install software, and your page file in Windows might cause frequent crashes.你得幾乎沒有剩餘空間安裝軟件，但您的頁面文件在Windows可能會導致頻繁的崩潰。 I opted for 20GB, which left me with just a bit over 16GB to use after installing Windows 7.我選擇了20GB的，這給我留下的只是有點超過16GB的使用在安裝Windows 7。
To change the amount of space to dedicate to Windows 7, click the small divider between Mac OS X and Windows, and drag it to the left.要更改的空間量奉獻到Windows 7，點擊小分在Mac OS X和Windows，並將其拖動到左側。
- Once you've determined how much space you want to allocate to Windows 7, click the Partition button.一旦確定了你多少空間要分配到Windows 7中，單擊分區按鈕。
- The partitioning itself doesn't take particularly long.分區本身並不需要特別長。 If you receive an error, proceed to如果你收到一個錯誤，請繼續 step 10第10步 of the “How to install Vista with Boot Camp” tutorial. “如何安裝Vista與新兵訓練營”教程。 It provides all the troubleshooting info you need to resolve partitioning issues.它提供了所有的故障排除信息你需要解決的分割問題。 Once you've cleared up any problems, or if everything just goes smoothly, proceed with the next step in this tutorial.一旦您清除了任何問題，或者如果一切只是順利，繼續下一步，在本教程。
- Once completed you'll notice a new BOOTCAMP drive on your desktop.一旦完成，你會發現一個新的bootcamp站點驅動器在桌面上。
- Now insert your Windows 7 DVD and click the Start Installation button.現在插入您的Windows 7影碟，然後按一下按鈕， 開始安裝 。
- Your Mac will restart, and Windows 7 will boot.您的Mac將重新啟動，以及Windows 7將啟動。 You'll be prompted with a window asking you which partition you want to install Windows on.你會出現一個提示窗口，詢問你想要哪個分區安裝Windows上。 Select the one with BOOTCAMP in the Name column.選擇之一bootcamp站點名稱列中。 Selecting anything else may wipe out OS X or cause serious problems.選擇別的可能消滅OS X或導致嚴重的問題。 Then select the Drive options (advanced) link.然後選擇驅動器選項（高級）鏈接。
- With the BOOTCAMP volume still selected, click the Format link.隨著bootcamp站點量仍然選中，單擊格式的鏈接。
- Click OK .單擊確定 。
- And Windows 7 will begin to install.和Windows 7將開始安裝。 It's a fairly boring process, so you may want to grab yourself a cup of coffee or your beverage of choice.這是一個相當枯燥的過程，因此您可能要抓住自己一杯咖啡或飲料的選擇。 But don't go too far away, because when your system reboots, you'll need to remove the Windows 7 DVD.但是，不要走太遠，因為當你的系統重新啟動後，您需要刪除Windows 7影碟。
- With the Windows 7 DVD removed, your Mac will automatically boot back into Windows 7, and the installation will complete.使用Windows 7影碟刪除，您的Mac會自動重新啟動進入Windows 7，安裝將完成。 You'll be prompted to select your language, keyboard layout etc. The rest of the Windows 7 installation process is very straight forward.您將被提示選擇您的語言，鍵盤佈局等，其餘的Windows 7安裝過程非常簡單。
- Once the installation has completed and your Mac has restarted again, you'll be able to use Windows 7.一旦安裝完成並重新啟動您的Mac再次，您可以使用Windows 7。 WiFi will work immediately (no drivers to install) so connect to the Internet.無線將立即展開工作（不需安裝任何驅動），以便連接到Internet。 Windows 7 will then begin to download updates, including the proper video card driver. Windows 7將然後開始下載更新，包括適當的視頻卡驅動程序。 Let it do its thing.讓它做它的事。
- Once completed, you'll be prompted to reboot yet again.一旦完成，系統會提示您再次重新啟動。 Do so.這樣做。
- Once Windows 7 boots back up again, you'll notice the resolution is much better, and you can enable the advanced graphics features.一旦Windows 7重新啟動備份，你會發現，決議是好多了，您可以啟用高級圖形功能。
- But if you check for sound, you'll notice there are no sound drivers installed.但是，如果你檢查聲音，你會發現沒有任何聲音驅動程序安裝。
- Insert your OS X Leopard DVD.插入你的OS X Leopard的影碟。 When prompted, select Run setup.exe .出現提示時，選擇運行setup.exe。
- The Boot Camp installer will launch.在新兵訓練營安裝程序將啟動。 Click Next to begin.單擊下一步開始。
- Select I accept the terms in the license agreement and then click Next again.選擇我接受條款的許可協議 ，然後再次單擊下一步 。
- Make sure that Apple Software Update for Windows is checked, and click Install .確保蘋果軟件更新的Windows被選中，並點擊安裝 。
- The Boot Camp installer will do its thing, and install all the required drivers.在新兵訓練營安裝程序將做它的事，並安裝所有需要的驅動程序。
- Notifications will pop up with each driver that gets installed.通知將彈出每個驅動程序被安裝。
- Once completed, click Finish .一旦完成，單擊完成 。
- And yet again you'll be prompted to reboot.並再次會提示您重新啟動。 Remove your OS X Leopard DVD from the drive, and click Yes to restart.刪除您的OS X Leopard的影碟從驅動器，然後單擊是以重新啟動。
- If you still have problems with sound not working, you'll need to install the Realtek drivers.如果仍然有問題，有聲沒有工作，你需要安裝的Realtek驅動程序。 This tutorial本教程 will explain what to do.將解釋怎樣做。
- That's it, you're done!就這樣，你就大功告成了！ When your Mac boots, hold down the Option key to select which Operating System you want to boot into.當您的Mac啟動時，按住Option鍵來選擇你想要的操作系統啟動到。
{ 54 trackbacks } （54）引用通告
{ 182 comments… read them below or （182評論...閱讀下面或 add one添加一個 } ）
I attempted to boot camp my iMac but during the install of 7, my machine had a BSOD stating – “attempt to reset display driver timed out”.我試圖以我的iMac電腦的新兵訓練營，但在安裝7，我的機器有一個BSOD說明- “嘗試重置顯示驅動程序超時”。 After several attempts I concluded that it was going to be possible with my generation of iMac (the one before the current gen).經過多次嘗試之後我得出的結論是將成為可能，我這一代的iMac電腦（一個在當前根）。
If you happen to have the nvidia graphics card with your iMac: it has a faulty GPU and therefore brings up this error.如果您正好有NVIDIA圖形卡與您的iMac：它有一個錯誤的GPU，因此帶出了這個錯誤。
I deal with a similar problem.我曾經處理過類似的問題。 Bring it to Apple to exchange it, or just leave windows off it (use vmware instead)提請蘋果交換，或者只是把它留窗口（使用VMware代替）
I can't get my Apple bluetooth keyboard working with Windows 7 in Boot Camp.我不能讓我的蘋果藍牙鍵盤的工作與Windows 7在新兵訓練營。 Strangely it was working fine before I inserted the Leopard Disk 1 and ran the driver update.奇怪的是在我工作的優良豹插入磁盤1和運行驅動程序的更新。 Any suggestions?有什麼建議？ Adding new device in the Control Panel just gives me error messages – it sees the keyboard but won't connect to it.添加新設備在控制面板中只給了我錯誤信息-它看到鍵盤，但不會連接到它。
Great Walkthrough!大演練！ I've got to admit, though, I had several more problems while attempting to install the beta on my own unibody Macbook than you did.我得承認，不過，我有幾個問題，同時嘗試安裝測試版以我個人的一體式機身比你的MacBook。 Partitioning in particular can give you a ton of errors, and takes forever if something is wrong.分區特別是可以給你一噸的錯誤，並採取永遠如果事情是錯的。
I'd given up on installing the beta, but my curiosity has gotten the better of me, and I think I'll give it another shot.我放棄了安裝測試版，但我的好奇心已經引起了更好的我，我想我給它一個球。
@adam, I'm having the exact same problem with the apple bluetooth keyboard. @亞當，我在完全相同的問題與蘋果藍牙鍵盤。 It worked fine for setup and before I ran the leopard disk installer, but after that I can't get the keyboard to pair with my iMac.它的工作格局和良好的運行之前，我豹磁盤安裝，但之後我無法鍵盤來對我的iMac。 I wonder what could be causing this.我不知道可能會導致此。 Maybe try deleting the bluetooth driver and having it revert to the default?也許嘗試刪除的藍牙驅動程序並使其恢復為默認？
Re: the imac bsod: i had that happen on my imac at work, and it is because the boot camp drivers on the Leopard DVD are older than the iMac.回复：新款iMac電腦藍屏死機：我有這樣的事情在我的iMac電腦在工作，這是因為司機新兵訓練營的豹影碟歲以上的iMac。
Just use the white DVD that came with your iMac INSTEAD of the Retail Leopard DVd to install the windows drivers, and you will be fine.只需使用白色影碟附帶您的iMac，而不是零售豹DVD安裝的Windows驅動程序，您將得到罰款。
I tried installing it on my Mac Pro tower to a single terabyte drive dedicated just for this OS install, but the installation just kept bombing out.我嘗試安裝它在我的Mac Pro的塔，一個1TB的硬盤，專門就這點操作系統安裝，但安裝只是不斷轟炸了。 I already have XP and Vista installed on other drives with no problems.我已經有XP和Vista安裝在其他驅動器沒有問題。 Anyone have any thoughts?任何人有任何想法嗎？
My problem is that when the system boots I just get a black screen with a cursor blinking up at the top left corner.我的問題是，當系統啟動我只是得到一個黑色的屏幕上光標閃爍了左上角。 I have left it there for 10 minutes but nothing seems to happen.我離開那兒了10分鐘，但似乎沒有任何事情發生。 This is the first reboot after step #8.這是第一次重新啟動後，步驟＃8。 Any ideas?任何想法？
I have it installed and up-to-date, however there seems to be an issue with the GPU and/or the fan control for the Perryn Macbook Pro with a NVidia GeForce 8600 GT.我已經安裝了它最新的，但似乎有一個問題與GPU和/或風扇控制的Perryn Macbook贊成使用了Nvidia的GeForce 8600系列。 Ive tried a few 3rd party fan control/remapping tools with no luck.香港專業教育學院嘗試了一些第三方的風扇控制/映射工具，沒有運氣。
The GPU seems to be heating up to 50 degrees + GPU的似乎是加熱到50攝氏度+
I'll be doing more tests to try to work out the issue.我會做更多的測試，試圖找出問題。
I'm curious can one nuke the Windows 7 partition and add it back to the main OS X partition without reformatting?我很好奇，才能朝核Windows 7的分區並把它添加到主OS X的分區沒有格式化？
Please let me know.請讓我知道。
@Michael: @邁克爾：
That part is actually pretty easy.這部分其實是相當容易。 Just use Disk Utility!只要使用磁盤工具！ No reformatting, rebooting, etc is necessary.沒有重新格式化，重新啟動等是必要的。
@ Brian @布賴恩
Disk utility is capable of non destructive formatting?磁盤實用程序能夠無損格式？ I was not able to get a definitive nswer anywhere.我無法得到一個明確的nswer任何地方。
@Michael: @邁克爾：
Just realized I misspoke (or mis-typed?).剛剛意識到我不恰當的（或錯誤類型？）。 It's actually Boot Camp Assistant that will work for this.它實際上新兵訓練營助理，將這項工作。 Open it up like you originally do when creating the Windows partition, only this time, you've got the option to erase it.打開它原來不喜歡你在創建Windows分區，只是這一次，你就可以選擇刪除它。 It'll remove the sucker and you'll have a single-partition OS X drive again.它會刪除吸盤，你就會有一個單獨的分區OS X的驅動器了。
Check it out.看看。 Finder > Applications > Utilities > Boot Camp Assistant.搜索“應用程序”>實用程序“>新兵訓練營助手。 Click Continue at the first screen.單擊繼續在第一個屏幕。 Make sure 'Create or remove a Windows partition' is selected, then click continue once more.確保'創建或刪除Windows分區'選中，然後點擊繼續一次。 It'll give you a screen showing that your drive will be formatted as a single partition, yay!它會給你一個屏幕顯示您的驅動器將被格式化為一個分區，yay！ Click Restore.單擊還原。 Enter your password when prompted, and watch BCA do its thing.輸入您的密碼提示時，手錶基本能力評估做它的事。
As always, I highly recommend backing up your OS X partition before doing this.與往常一樣，我強烈建議備份您的OS X的分區之前這樣做。 While it isn't likely, there's always a chance that something will go horribly wrong and you'll need to do a restore.雖然不太可能，總會有機會的東西會嚴重錯誤，您需要做恢復。 If it makes you feel any better, I've removed several partitions this way with no problems.如果它讓你感覺再好，我刪除了幾個分區，這樣沒有問題。 Hope this helps!希望這有助於！
@Brian – @布萊恩-
Thanks for clarifying感謝澄清
I had already emailed Michael w/ your advice on using Boot Camp Assistant to remove the existing Windows partition, so he's safe.我已經通過電子郵件邁克爾瓦特/你們的意見，使用Boot Camp的助理，刪除現有的Windows分區，所以他的安全。 Using Disk Utility will certainly format the partition, but makes it a lot tougher (not impossible) to re-join w/ your OS X partition.使用磁盤工具一定會格式化該分區，但這使得很多強硬的（不是不可能的）重新加入瓦特/您的OS X的分區。
I'm working on a tutorial now that covers both methods.我正在一個教程現在覆蓋兩種方法。
Ross羅斯
@Brian @布賴恩
Quote:報價：
“My problem is that when the system boots I just get a black screen with a cursor blinking up at the top left corner. “我的問題是，當系統啟動我只是得到一個黑色的屏幕上光標閃爍了左上角。 I have left it there for 10 minutes but nothing seems to happen.我離開那兒了10分鐘，但似乎沒有任何事情發生。 This is the first reboot after step #8.這是第一次重新啟動後，步驟＃8。 Any ideas?”任何想法？“
I have this same problem (imac 24″ 2.8Ghz, nvidia graphic card 8800Gt), did you managed to solve it?我有一個相同的問題（的iMac 24“為2.8GHz，NVIDIA的圖形卡馳8800GT），你設法解決這個問題？ how?如何？ Btw.. Btw .. i tried to install with the same disc on a mac pro single cpu (both bought 20 days ago) and it went fine…我試圖安裝相同的光盤上的Mac Pro單一CPU（包括收購了20天前），並罰款了...
My Apple wireless mouse also worked up until i ran the Leopard disk installer.我的蘋果無線鼠標還努力直到我跑到豹磁盤安裝。 When i add devices it shows the mouse but still doesn't work.當我添加設備它顯示了鼠標，但仍然不能正常工作。
Sorry about the dumb question but do you use the 32 bit or 64 bit Windows 7?令人遺憾的，愚蠢的問題，但你使用32位或64位Windows 7？
@Phillip Look back to post #2. @菲利普回首後＃2。 Tom says it will not work with the NVIDIA graphocs card.湯姆說，它不會與NVIDIA的graphocs卡。 I have the the following:我有以下內容：
Model Name: iMac產品型號：iMac電腦
Model Identifier: iMac6,1型號標識：iMac6，1
Processor Name: Intel Core 2 Duo處理器名稱：英特爾酷睿2
Processor Speed: 2.16 GHz處理器速度：2.16千兆赫
Number Of Processors: 1處理器數目：1
Total Number Of Cores: 2內核總數：2
L2 Cache: 4 MB二級緩存：4 MB的
Memory: 1.5 GB內存：1.5 GB的
Bus Speed: 667 MHz總線速度：667兆赫
Boot ROM Version: IM61.0093.B07 Boot ROM版本：IM61.0093.B07
SMC Version: 1.10f3校董會版本：1.10f3
NVIDIA GeForce 7300 GT NVIDIA公司的GeForce 7300億噸
Revision ID: 0×00a1修訂編號：0 × 00a1
ROM Revision: 3022光盤版次：3022
I get the BSOD identifying display as the problem and it just reboots.我得到的藍屏死機顯示為查明問題，它只是重新啟動。
Has anyone been able to get it to work and if so, how?有沒有人能夠得到它的工作，如果有，如何？
I just tried installing W7 on a 4 core MacPro with the Geforce 7300 and also get the BSOD with a similar message.我只是嘗試安裝W7在4核心MacPro與GeForce 7300，也得到了藍屏死機的類似信息。 Anyway around this?無論如何解決此問題？ Has anyone just tried it in Parallels or VMWare?有沒有人就嘗試過在Parallels或VMWare？
Gareth – for my Macbook i used 32 – bit加雷思-我的MacBook我用32 -位
I installed Windows 7 Beta on a 20-inch 2.66GHz iMac but encountered a problem.我安裝了Windows 7測試版在20英寸2.66GHz的iMac電腦，但遇到了問題。 I installed the necessary drivers from the mac os x disc and for some reason there is no audio output from the internal speakers.我安裝了必要的驅動程序在Mac OS X光盤由於某種原因沒有音頻輸出的內置揚聲器。 Can anyone please help me?誰能請幫助我？
Thanks for putting together these instructions.感謝匯總這些說明。 They worked perfectly for me on a 13″ MacBook (not aluminum).他們的工作對我來說完全以13“的MacBook（不鋁）。 I've since installed several Windows apps and all is working fine so far.自從我安裝了幾個Windows應用程序和所有工作正常至今。 I do have one question: how did you get the OS down to 6G?我有一個問題：你是怎麼得到的操作系統到第六代？ After install, mine was around 10G.安裝後，我約為10G的。 I saved 2G by turning off hibernation.我保存的2G通過關閉休眠狀態。 Any other suggestions?其他建議？
Paul, I had the same problem.保羅，我有同樣的問題。 Even though I installed the Windows drivers from my Leopard disk, my 24″ iMac would not play any sounds.儘管我安裝了Windows驅動程序從我豹盤，我的24“iMac電腦將無法播放任何聲音。 The solution was to download and install the latest RealTek driver (2.16) which I found on解決的辦法是下載並安裝最新的RealTek等的驅動程序（2.16），我發現 http://www.realtek.com/downloads/ http://www.realtek.com/downloads/ . 。 You need to click the “High Definition Audio Codecs (Software)” link and click Accept on the next screen.你需要點擊“高清晰度音頻編解碼器（軟件）”鏈接，並點擊接受在下一個屏幕上。 I downloaded the executable.我下載的可執行文件。 Please note that the vendors site is very slow so the download may take a while.請注意，供應商的網站是非常緩慢，下載可能需要一段時間。 After installing this the sounds starting working for me right away.在安裝這種聲音開始工作適合我了。
Philip, yes I managed to solve it…..菲利普，是我設法解決這個問題... .. I tried again……It was the same disk that failed initially but suddenly it started working.我再一次嘗試... ...這是在同一磁盤上失敗的開始，但突然它開始工作。 No idea why the problem would occur.不知道為什麼會出現問題。
Brian aka BrianSF布賴恩又名BrianSF
I used the instructions above on my 24″ 3.0Ghz iMac and Windows 7 works like a charm.我使用了上述指示我的24“3.0千兆iMac電腦和Windows 7工程就像一個魅力。 The only problem was the sound which you can see in my previous post that I have solved.唯一的問題是聲音，你可以看到我在以前的職位，我已經解決了。 I haven't touched OS X since the day before yesterday.我還沒有觸及OS X的自前天。 Windows 7 is one suave looking operating system and for a beta release it works very well. Windows 7是一個溫文爾雅的前瞻性操作系統和一個測試版運行良好。
Btw (and I promise this is the last post from me tonight). Btw（我保證這是最後的員額從我今晚）。 I have the nVidia card in my iMac and I have not had any BSOD.我在我的nVidia顯卡iMac和我沒有任何藍屏。
For anyone interested.任何人感興趣。 I installed W7 in Parallels 4 without Bootcamp and it seems to work just fine.我安裝了W7在Parallels 4沒有bootcamp站點，它似乎工作得很好。 Having said that it is about time MS got it right and I see no reason to abandon OS X especially with Snow Leopard coming.話雖如此，它是關於時間ms了它的權利，我認為沒有理由放棄OS X的，特別是雪豹到來。 Now my Windows friends will cough up more money to replace a failed OS that they still had to pay for.現在，我的Windows的朋友將會透露更多的錢，以取代一個失敗的操作系統，他們還必須支付。
W 7 = OS X 10.4 ( maybe)糯7 = OS X 10.4的（可能）
i downloaded the windows 7 beta using my mac but the boot camp says it can't find the disk image.我下載了Windows 7測試版使用我的Mac，但新兵訓練營說，找不到磁盤映像。 My macbook is the 1.3 inch 2.4Ghz leopard v10.5.我的MacBook是1.3英寸的2.4GHz豹v10.5。
please tell me what to do.請告訴我怎麼做。
Raymond,雷蒙德
To install windows 7, you have to burn the image to a dvd.要安裝Windows 7，你要刻錄成DVD的圖像。
Im having troubles installig the bootcamp drivers, when I insert the disc It just doesent run, it displays an error message.進出口有麻煩installig的bootcamp站點司機，當我插入光盤，只是doesent運行，它顯示一個錯誤信息。
Any ideas.任何想法。
@Brian @布賴恩
Yeah, same happened to me, strange though i can't get what was this…是的，同樣發生在我身上，奇怪的，雖然我不能得到什麼是這樣...
I have installed Windows 7 but I can't find my OSX Leopard DVD, is there any other way i can get BootCamp installed on Windows, or at least somehow get back to my OSX installation?我已經安裝了Windows 7，但我不能找到我的OSX上豹影碟，有沒有其他方式獲得網站告訴我可以安裝在Windows，或者至少是某種回到我OSX上安裝？
hi everybody嗨大家
I have the same problem with the BSOD in the installation, in the last part, the BSOD appears and it only restarts and restarts, I have the same model of iMac than Emmet: iMac6,1 is one generation befor the current generation.我有同樣的問題與藍屏死機的安裝，在最後部分，藍屏死機出現，只是重新啟動，重新啟動後，我也有同樣型號的iMac電腦比埃米特：iMac6，1是一代befor一代。 What can i do?我能做些什麼？ I used bootcamp.我使用bootcamp站點。
I have a 2.2Ghz 15″ MBP and when it tries to boot to the Win 7 install DVD it says:我有一個2.2GHz的15“MBP和當它試圖引導到勝利7安裝DVD的內容是：
1. 1。
2. 2。
Select DVD-ROM type:_選擇DVD - ROM型：_
The is nothing next to 1 or 2 and the keyboard is unresponsive.旁邊的是什麼為1或2，鍵盤沒有響應。 Anyone encounter this?任何人遇到這種？
@Johnny; @約翰尼;
Had the same problem when I tried to install the 64-bit.如果同樣的問題，當我嘗試安裝64位。 Never saw a workaround for this.從來沒有見過這一種替代方法。
@johnny and Emett @ Johnny和埃梅特
Yes, i tried to install de 64 bit and my imac shows me that message:是的，我嘗試安裝64位的德和我的iMac電腦顯示我的信息：
1. 1。
2. 2。
Select DVD-ROM type:_選擇DVD - ROM型：_
please, somebody helps us, how can we install Win 7 in our iMacs?請，有人幫助我們，我們又怎能贏得7安裝在我們的iMac電腦？
Any particular reason to install the 64bit version?任何特別的原因安裝64位版本？ The 32 bit works fine for me. 32位工程罰款我。 It does state in the screen that the Boot Camp Assistent shows that it requires the 32bit version of either Vista or XP (at least, that's the way I read it) so it might be safe to assume that it requires the 32bit version of Windows 7 as well.它的狀態在屏幕上的新兵訓練營Assistent表明，它需要的不是32位版本Vista或XP（至少，這就是我讀它），所以它可能是安全的假設，它要求32位版本的Windows 7以及。 No?沒有？
I tried to install the 64 bit version,since I have more than 4 gigs of ram.我嘗試安裝64位版本，因為我已經超過4音樂會的RAM。 I received the same error as above.我收到同樣的錯誤上面。 I tried some of the solutions on other sites,such as reburning the dvd,but no go.我試圖解決一些在其他網站上，如再燃的DVD，但沒有去。 I decided it wasn't worth the effort to play with a beta.我決定是不值得玩，一個測試版。
@Andrew, did you ever get the bluetooth keyboard issue resolved? @安德魯，你永遠不可能藍牙鍵盤問題的解決？ I can't find how to remove the Boot Camp driver safely without messing something else up.我找不到如何刪除驅動程序安全新兵訓練營沒有搞亂別的東西了。
I've just installed the latest 64 bit Windows 7 on my 24″ iMac (nVidia 8800 GS).我剛剛安裝了最新的64位Windows 7在我24“的iMac（nVidia的8800個GS）。 Everything went on ok.一切就OK了。 The Bootcamp drivers don't work obviously.應該辭職驅動程序不工作明顯。 No Audio無音頻
Windows has detected a High Definition Audio Device and seems to think it's using it ok but there's no actual sound. Windows檢測到的高清晰度音頻設備，似乎認為這是使用它確定，但有沒有實際的聲音。 No iSight driver either. iSight的司機也沒有。
Rob, did you try the latest Realtek driver?羅布，你嘗試最新的瑞昱驅動程序？ I can see that the R2.14 should work on 64 bit as well.我可以看到R2.14應在64位以及。 I had the exact same problem on 32bit but installing this driver solved my problem.我有完全相同的問題對32位，但安裝此驅動程序解決了問題。 Link is環線 http://www.realtek.com/downloads/ http://www.realtek.com/downloads/ you need to click High Definition Audio Codecs and then Accept.您需要按一下高清晰度音頻編解碼器，然後接受。 I downloaded the Executable version.我下載的可執行文件的版本。
Downloaded the iso, got the product key, and used RecordNow to burn the disc.下載的ISO，獲得產品密鑰，並使用的RecordNow刻錄光盤。 When I insert the disc into my XP PC, it recognizes it as a Windows install disc, but the Superdrive on my MacBook Air doesn't recognize it at all.當我插入光盤到我的XP電腦，它承認它為Windows安裝光盤，但是光驅在我的MacBook空氣不承認它。 Any alternatives?任何選擇？ Can I burn the iso from my Air via the Superdrive?我可以刻錄的ISO從我的空氣通過光驅？ Use remote disc?使用遠程光盤嗎？
Update–and more confusion.更新和更多的混亂。 Got the external drive from my Fujitsu Lifebook to both recognize the disc and be recognized by the MacBook Air.得到了外部驅動器從我的富士通Lifebook既識別該光盤，並承認MacBook Air的。 Still confused about why the SuperDrive–which I was able to use to reinstall OSX a month ago after a hard drive issue–is being recalcitrant.為什麼仍感到困惑的SuperDrive光驅，而我可以用重新安裝OSX版一個月前的硬盤驅動器後，問題正在頑抗。
thx BrianSF! thx BrianSF！ Downloading the Realtek driver did the trick for me.下載了Realtek司機沒有我的把戲。 However i still need the drivers for iSight, Bluetooth, and touchpad.不過，我仍然需要iSight攝像的驅動程序，藍牙和觸摸板。 My OS X Leopard DVD woun't work, so any one who knows where I may find the other drivers?我的OS X Leopard的影碟woun't工作，因此任何一個誰知道在那裡我可以找到其他車手？
I have a 2008 aluninum iMac.我有一個2008年鋁的iMac電腦。 Sound worked for me right out of the box with Windows 7 build 7000 and so did Bluetooth and WiFi.良好的工作適合我開箱與Windows 7建立7000，因此也藍牙和WiFi。 I only have trouble getting iSight to work.我只有麻煩iSight攝像工作。
…and we're go! ...我們走！ Downloaded the Realtek driver and the sound worked.下載了Realtek驅動程序和健全工作。 Haven't tried iSight or Bluetooth yet (but I recall seeing the Apple Bluetooth driver being loaded during the software update).沒有試過iSight或藍牙還（但我記得看到蘋果藍牙驅動程序被加載在軟件更新）。
A few suggestions to clarify the process:一些建議澄清的過程：
Step 9: Before you get the prompt asking where you want to install, you'll get a black screen and a progress window that says 'installing files'.第9步：在你的提示，詢問您希望安裝，你會得到一個黑色的屏幕和一個進度窗口，上面寫著'安裝文件'。 I was a bit worried it had started to install by default…我是有點擔心，它已開始安裝，默認情況下...
Step 13: My MacBook Air did not automatically boot back into Windows 7; I came back in OS X and had to reboot while holding the option key down.步驟13：我的MacBook空氣並不自動重新啟動進入Windows 7，我回來，在OS X，並重新啟動按住Option鍵了。
Otherwise, remarkably quick.否則，非常快。 Got Office03 installed as well, making the whole think pretty work-compatible…安裝了Office03以及，使整個認為漂亮的工作，兼容...
I still cannot install Windows 7 on my iMac6,1 The BSOD appears in the last step of installation, Help please!!我仍然無法安裝Windows 7在我iMac6，1藍屏死機出現在安裝的最後一步，請幫助！
Has anyone with the Nvidia problem that has not been able to get pass the BSOD screen tried to install either Windows XP or Vista and then tried to upgrade to Win7?有沒有人與Nvidia的問題一直未能得到通過藍屏死機屏幕嘗試安裝Windows XP或Vista，然後嘗試升級到Win7？
Thought abot trying it, but want to see if anyone else has had experience with it.思想卡博特嘗試，但想看看其他人不得不與它的經驗。
Thanks to everyone for all the great support.感謝大家對所有的大力支持。
EDIT: No, It didn't.編輯：不，它沒有。 Stupid me.愚蠢的我。
Installing the Boot Camp drivers also didn't help.安裝Boot Camp的司機也沒有幫助。 I'm getting RealTek HD audio codecs from the website now.我收到Realtek HD音頻編解碼器，現在的網站。 Bluetooth, however, works just fine, even before the Boot Camp driver installation.藍牙，但是，工作得很好，甚至在新兵訓練營驅動程序的安裝。
Anyone know how to slow down the swipe response time?任何人都知道如何減緩刷卡響應時間？ I can swipe up and down in IE8 but it's wicked fast…我可以向上和向下滑動，在IE8的，但它的邪惡快...
Just installed Win 7 on my Macbook, (2.0GHZ).剛安裝了溫7我的MacBook（2.0GHz的）。 The problem I'm having is when it comes to installing Bootcamp in Windows, my Leopard disc says it's expecting either Win XP or Vista and it won't install.這個問題我在來時是在安裝bootcamp站點在Windows中，我說，豹光盤的期待也贏XP或Vista也不會安裝。 (My MB originally came with OS X 10.4 so I purchased and upgraded my MB to Leopard later.) （我MB的最初帶著OS X 10.4的，所以我買我的主板升級到Leopard之後。）
Is there a registry setting in windows (via regedit) that I can tweak to fool my Leopard disc into thinking it's Vista and not Win 7?是否有一個註冊表設置窗口（通過輸入regedit），我可以調整，欺騙我的豹光盤以為它的景色而不是視窗7？
Please help, thanks.請幫助，謝謝。
how do I burn the image to a DVD, I copied the file from my portable drive to the DVD and hit burn.我如何刻錄圖片到DVD，我複製文件從我的便攜式驅動器的DVD和擊中燃燒。 The file extesion is still .iso.該文件還extesion。異。 Am I missing a step?我缺少一個步驟？
To get my aluminum bluetooth keyboard working on my iMac under Windows 7, I followed these instructions found on the Macrumors.com forums.為了讓我的鋁藍牙鍵盤的工作在我的iMac在Windows 7之後，我發現這些指示的Macrumors.com論壇。 Fixed things for me:固定的事情對我來說：
I had to right click on the device when it was found in bluetooth sync part, and then there is an option for Human Control Devices.我不得不右鍵點擊該設備時，被發現在藍牙同步的一部分，然後有一個選項為人類控制裝置。 (Mice, Keyboards etc…) （鼠標，鍵盤等...）
I ticked that box and afterwards Windows 7 installed the Apple Keyboard and everything was hunky dory.餘打勾的框及以後的Windows 7安裝蘋果的鍵盤和一切hunky美好。
@Allan @艾倫
If you're on a mac, go to the applications and find the folder Utilities, Open it and look for and click Disk Utility.如果你在Mac上，去找到應用程序和實用工具的文件夾，打開它，尋找並單擊磁盤工具。
On the left side top panel, you see the disk drives on the system.在左側面板頂部，可以看到硬盤上的系統。 Directly below you should have a list of .iso files.下方您應該有一個列表。ISO文件。 If the file you want to burn is not listed, click on the Burn icon at the top and find the file.如果該文件要刻錄沒有列出，請單擊刻錄圖標上方，找到該文件。
If it's listed in the bottom panel, right click and select Burn.如果它的上市在底部面板中，右鍵單擊並選擇燒傷。 If you use the Burn icon at the top, just find and select the file and click Burn.如果您使用刻錄圖標上方，只需找到並選擇該文件並單擊燒傷。 Insert a blank disk and you should be good to go.插入一張空白磁盤，你應該是好去。
Hope this helps.希望這有助於。
I'm new to macs (new Macbook aluminum 2.4 ghz, 4 gb ram, 128 SSD) and it doesn't recognize the DVD file that I've burned.我新的蘋果（新發布EOS 50D的2.4 GHz，4 GB內存，128 SSD）和不承認的DVD文件，我已經被燒毀。 I downloaded the windows 7 off the Microsoft site so I'm pretty sure it would be legit.我下載的Windows 7關閉微軟的網站，以便我敢肯定，這將是合法的。 I downloaded the file to my desktop and then when I inserted the blank DVD into my computer it allowed me to open the DVD.我下載的文件到我的桌面上，然後當我插入空白的DVD到我的電腦，讓我打開影碟。 I then dragged the .iso file into the DVD and clicked “Burn” from there.然後我拖累。iso文件到DVD，並點擊“刻錄”從那裡。 Everything copied fine.一切複製罰款。 As soon I click on the “Start Installation” button it says it doesn't recognize the file on the DVD.一旦我點擊“開始安裝”按鈕，表示不承認文件的DVD。 HELP!幫助！
You're supposed to burn the .iso file right?你應該燒。iso文件嗎？ I've done that and also double clicked the .iso file and also burned that too.我已經這麼做了，也點擊了一倍。iso文件，也被燒毀，太多。 Neither worked.但是都沒有成功。
@Ben @本
Did you go do the walk through at the top of this page?你去這樣做漫步在頁首？ I do believe you need to start with Boot Camp, VMWare Fusion or Parallels to use Windows 7.我相信你需要開始有了Boot Camp，VMware Fusion的或Parallels使用Windows 7。
Hope that helps.希望幫助。
Yea, I did.是啊，我沒有。 I got it to work though.我懂了，但工作。 Apparently you need to burn through the utility.顯然你需要燒穿該實用工具。 I'm on Windows 7 right now and I do like it so far!我在Windows 7現在，我不喜歡它迄今！ Is there anyway to get the tap click to work on Windows?反正有獲得自來水單擊在Windows？ I can't stand having to actually push the mouse pad down to click on things….我再也無法忍受而真正推動鼠標墊到點擊的事情...。
Hi,嗨，
I'm trying to install Windows 7 on my iMac 24… I get privilege errors such as:我試圖安裝Windows 7在我的iMac 24 ...我得到的特權錯誤，如：
Service 'MacHAL' (MacHALDRIVER) failed to start.服務'馬哈爾'（MacHALDRIVER）未能啟動。 Verify that you have sufficient privileges to start system services.請確認您有足夠的權限來啟動系統服務。
ABORT RETRY IGNORE…流產重試忽略...
so what do i DOOOO?那麼我DOOOO？
No luck on my iMac 6,1 either沒有運氣不是我的iMac 6,1
I am trying an XP install and upgrading to 7 beta to see if that makes a difference.我正在一XP安裝和升級到7第二，看看是否有差別。 I will report back shortly.我會在短期內報到。
Great guide..大指南.. But I´ve got one problem..但我有一個問題.. I have installed W7 on my macbook alu..我已經安裝了W7對我的MacBook鋁.. But when I am trying to install drivers from leopard DVD it shows an error ??但是，當我正嘗試安裝驅動程序從豹影碟它顯示了錯誤？？ does anyone have a similar problem??沒有任何人有類似的問題？？
Everything worked great on my 2.4 ghz iMac except when I loaded the new Realtek driver, the internal microphone stopped working. The internal microphone worked great before I loaded that new driver to get sound to play, but now it's broken. I've tried everything to try to get it working again, but with no luck. I tried to roll back the drivers but that didn't work either. Anyone else have this problem and have fixed it? Any Help would be greatly appreciated!
Am just downloading from the Realtek site now. Great thread guys. Solved a lot of my probs. Apart from sound Windows 7 is running like a dream on my 24″ Imac. Thx Thx
Brian布賴恩
I just installed Windows 7 with VM Ware fusion on my MBP 2.16.我剛剛安裝了Windows 7 VM Ware軟件融合在我的髓鞘鹼性蛋白2.16。 Works like a charm…工程就像一個魅力...
When i try to install, it asks me to choose a CD-ROM boot option, 1 or 2, but i can't choose 1 or 2.當我嘗試安裝時，要求我選擇一個CD - ROM啟動選項，1或2，但我不能選擇1或2。 I can't do anything.我不能做任何事情。
My MacBook is the Santa Rosa MacBook (IE white plastic), with a 1.83 gHz C2D, 1GB RAM我的MacBook是Santa Rosa平台的MacBook（IE的白色塑料），以1.83 GHz的冰封，1GB內存
I'm trying the install using a DVD-RW that was recently erased, and the 64 Bit version.我試圖安裝使用的DVD - RW這是最近刪除，和64位版本。 Any help would be great, thanks!任何幫助將是巨大的，謝謝！
Anyone solve the problem with the black screen asking for windows boot disk?任何解決問題與黑色屏幕要求Windows啟動盤？
Is there any other alternative without burning the windows 7 in to a dvd to install it?是否有其他選擇的情況下燃燒窗戶7成DVD安裝它？
Guess nobody else had my issue?猜測別人有我的問題呢？
When I try to run setup.exe from my Leopard OS-X disc, it pops up a message saying that I must be running Windows-XP SP2 or Windows Vista!當我試圖從我的運行Setup.exe Leopard的OS - X的光盤，它會彈出一個消息，說我必須執行Windows XP SP2或Windows Vista的！
Then it pops up a screen similar to the one in the run-through, with “Finish” being the only active button!然後屏幕彈出一個類似的貫通，與“完成”是唯一的積極按鈕！
So, no dice for me in installing ANY of Apple's drivers!所以，我沒有骰子在安裝任何蘋果電腦的驅動程序！
To those that are trying to install Win7beta1 through bootcamp on there Mac and getting the message “1.那些正在試圖安裝Win7beta1通過bootcamp站點上有Mac和得到消息“1。 2. 2。 Choose a CDROM boot option” and not able to choose either, the problem may be with your USB hardware.選擇光盤啟動選項“，無法選擇或者，該問題可能與您的USB硬件。 I did an upgrade of Vista 64 bit within the bootcamp partition and the first thing that happens is a compatiblility check.我沒有升級Vista的64位在bootcamp站點分區和第一件事情是一個compatiblility檢查。 A couple of things were noted.一對夫婦的事情說。 1. 1。 Kaspersky 7 can not be on the system and needed to be removed before the upgrade would start.卡巴斯基7不能在系統上，需要刪除在升級前將開始。 2. 2。 there was a note about USB problems and check for Web updates on the manufacturers site after the install.有一份有關USB的問題和檢查網頁更新的製造商的網站後，安裝。 3. 3。 Windows Mail would not work. Windows郵件是行不通的。
I removed Kaspersky and tried again, getting the later 2 warnings again.我刪除卡巴斯基和再次嘗試，得到了以後2警告一次。 This time the installation went ahead.這一次，安裝了前面。 It took a couple of hours to upgrade and move all the files.一對夫婦花了數小時的升級和移動的所有文件。 On first boot all the hardware was recognized and installed except for my Matshita DVD.在第一次啟動的所有硬件和安裝承認，除了我的松下影碟。 Stange because all the other USB devices worked.奇怪，因為所有其他USB設備工作。 Keyboard, Mouse, Memory sticks, etc. There were no drivers on the web to correct this problem.鍵盤，鼠標，記憶棒等，司機有沒有在網上糾正這一問題。
In Vista if you look at the the USB Devices the Matshita DVD is recognized as a USB drive.在Vista中，如果你看的USB設備的松下DVD是公認的USB驅動器。
I tried a clean install and got the same message ” 1.我嘗試了全新安裝，並獲得相同的信息“1。 2. 2。 Choose,..etc”.選擇，..等“。 there are no devices listed in option 1.有沒有設備列在選項1。 or 2.或2。 and I couldn't get my keyboard to work.我不能讓我的鍵盤工作。 So unless MS or Apple are willing to supply those needed drivers we may be out of luck testing Beta 1 on our Macs through Bootcamp at least.所以，除非MS或蘋果公司願意提供這些需要的驅動程序，我們可能會倒霉Beta 1的測試，對我們的Mac電腦，至少通過bootcamp站點。
@ @ Peter彼得 : ：
Which type of Mac (model/gen etc) do you have?哪種類型的蘋果（型號/根等）你有？ The phrase “we may be out of luck testing Beta 1 on our Macs” isn't entirely accurate, as it runs without any errors on my Mac – a first gen MacBook Pro.這句話：“我們可能會倒霉Beta 1的測試我們的Mac電腦上”不完全準確，因為它運行沒有任何錯誤，我的Mac上-第一代的MacBook Pro。
Ross,羅斯
I have a 1st gen iMac Aluminum 24″ 2.8ghz proc.我有一個第一代的iMac鋁24“2.8GHz的進程內。 I re-ran the installation setup again to get the “Compatibility Check” warning log.我重新運行安裝程序再次獲得“相容性檢查”的警告日誌。
The following issues are preventing Windows from upgrading.下面的問題是阻止Windows的升級。 Cancel the upgrade, complete each task, and then restart the upgrade to continue.取消升級，完成每項任務，然後重新啟動升級繼續。
For these items, make the following changes:
Uninstall these programs. Open Control Panel and search for “uninstall a program”.
Kaspersky Anti-Virus
Upgrading Windows will affect the following devices and/or programs:
These devices might not work properly after the upgrade. After the upgrade completes, check Windows Update for updated drivers or go to the device manufacturer's website.
Kernel USB Software Bus by TCP
The Kernel USB Software Bus by TCP is what seems to be the problem. As I was saying before I can upgrade to Windows 7 by removing Kaspersky but I will not see my Matshita DVD-R UJ-85J ATA Device when the installation is complete and if I try to do a clean install from Boot Camp on a freshly made partition the Computer just hangs at the pre installation screen(First boot after boot camp makes the partition,… 1. 2. choose,…)
Hey. Install worked fine but it doesn't read the Mac OS Application DVD ?! Any suggestions how I can get the drivers on there without the DVD? Cause I can use other cd's / DVD's and they work fine. Can't make an Iso out of the application DVD and can't access the DVD on Win XP either…something is weird…ideas? Email me, thanks!
Anyone having trouble with the Realtek driver? I have a 2nd generation MBA 128 SSD that is now running Windows 7 beta. However, I can't get MP3s or audio CDs to play correctly: I'm hearing pops and drop-outs every so often. I've tried updating the Realtek driver with the version on their website (2.14), but it doesn't appear to be any different then what I was able to get off of the MAC OS X install disk. Please confirm if anyone is experiencing the same problem. Thanks.謝謝。
Edits to post 69 and 71
Problem Solved:
My original install was an upgrade from Vista 64Bit. For some reason the procedure didn't like certain devices and wouldn't load the drivers. My second install and mistake was trying a clean install from Boot Camp. That left me with the “1. 2. 2。 Choose,..” error.
Reading on another site, the way I needed to install Win7 was from within Vista but selecting a custom(Clean) install. That worked. I loaded the Boot Camp 64bit drivers 2.01 then the upgrade to 2.1. All devices except the Realtek Audio worked.
To fix the No Sound problem I headed over to Guru3d.com and downloaded the Genric Audio drivers Version 2.14, first one on there list. That worked like a charm.
All is good, good luck to those still searching.
i got the isight drivers, bluetooth drivers, everything
when you put the osx leopard dvd in, instead of using auto run, click explore
once youre there click drivers
click apple
isight & bluetooth drivers are there. look around for everything else.
hope this helped!
@tchapp
That's very helpful. i put in the dvd. saw the directory you told me about, then copied all those files onto my hard drive. when i try to run any of those apps, i give permission, then nothing happens. nothing installs or anything. I must be doing it wrong. could you tell me the next steps after seeing the files, until everything is completely installed? thanks!謝謝！
dont copy and save to hard drive. just double click and run straight from the cd
That was the first thing I tried, but all that happened then was I got an error saying the application wasn't properly installed, would i like to try again? and when i do that, that is when nothing further happens. I got the same results whether I left the files on the disk, or if i copied to the hard drive.
@tchapp also, I looked at the error message more carefully and it says those applications did not run because they are old and did not install properly. trying to run them does nothing at all. the only application that does run in the boot camp installer, which seems to operate properly.
Another error which has come up, which is slightly annoying, is that now whenever I switch back to the mac, the clock gets set 5 hours earlier than it should be. i looked around on the web and saw that this error has come up for other users, so I made sure that on windows and on the mac os side I was synchronizing with the same time server (time.nist.gov in this case). that doesn't seem to fix the problem. so i manually set the time on the mac side, which worked, until i ran windows then came back, at which point it was 5 hours too early again. it is properly set for my time zone. I don't know how to work around this bug.
you can only install a few driver. for me, i got isight, bluetooth, audio and something else off of it. i think intel gma drivers or something. nothing else will work. i tried everysingle one.
Is it possible to run windows 7 using virtual box? If yes, how?
These steps worked beautifully for me on my white macbook. The only thing I needed to do was download the RealTek.
I have a 2.66gh MacPro. I downloaded the Win 7 file and sucessfully installed it. Due to other issues, I had to delete it and now cannot get it going again. No matter what I do i get an error after selecting “Format”. The little blue donut whizzes around, then I click on the “next” button I get a dialogue with something to the effect that setup cannot find a system or partition to update.
I do select the Custom installation as I did the first time I installed it.
Any clues would help.
Just a clarification by “get it going” I mean “installed”.
When I insert the windows 7 disk, boot camp refuses to recognise it and Im at a loss as to what to do. The partition went fine, and I have updated my system to the most recent updates. Any help as to how I might be able to get it working would be appreciated.
Every single time i go to windows 7 then back to mac os, my clock gets set 5 hours back on the mac. (I'm in UTC-5, new york) It doesn't matter if i have set time.nist.gov to be the time server in windows and in the mac os. it doesn't matter if i have the time set to manual… i have tried all the combinations, manual-manual, manual-auto, auto-manual, and auto-auto, and in none of those cases does the clock work properly when i return to mac os.
I googled this and see this has been an apple bug since before 2006, and here we are 3 years later, and they still haven't fixed it.
more oddly, people have solved this problem for themselves in all sorts of ways–none of which have worked for me.
does anybody have a workaround?
have you disabled the Apple Time Service in services.msc, there's also a registry key you can/have to change to prevent it… RealtimeIsUniversal (or something similar)
makes it for a very frustrating 3 weeks of not being able to log into Mac when we found this issue… but the above fixed it here on a lot of machines.
@phil, is there something i can do to just be able to have internet time in windows and mac os x work correctly? if i disable apple time services… then won'ti have an out-of-sync clock on the mac side?
Is it fine if I use Windows Xp Professional?
Hey I have Windows 7 on a DVD I just have the .ISO is there somthing I needed to do before burning it to the DVD becuase its giving me an error saying cannot find windows disc when I start installation.
my windows 7 will not auto run the leopard disk. So i cant run setup.exe and install the drivers needed. Help!幫助！
When i click the leopard DVD drive in “My computer” it shows an empty disk!
I've installed and *everything* went fine, except the graphics driver will not install, it just installed the generic VGA driver and I have not been able to force the install, even when doing it manually it will not install. I tried downloading the correct drivers, running the setup program (says no hardware found), then applying the drivers directly on the device manager to no avail.
As a side effect of this (I think) I get all kinds of funny UI errors, like the task bar menu will turn black, and other things
my video card is the NVidia GeForce 8800 GS
HELP!!!
I have burned the iso file called
7000.0.081212-1400_client_en-us_Ultimate-GB1CULFRE_EN_DVD
to a blank DVD. I have partitioned my hard drive, and when it prompts me to insert the install disc I insert the burned disc and click “start installation.” It then says the disc could not be recognized and asks me to wait longer and try again, even though the disc appears on the desktop just fine. Somebody please tell me why this won't work!
Could who help me?
I am need installing the Windows XP or more finished in 10 minutes.
thank you for the help.
good luck for you.
I did this and it worked great. I am up and running Win7 beta. However, unless it was already mentioned here, you will not be able to get Windows to “talk” with your Mac unless you get HFSExplorer from http://hem.bredband.net/catacombae/hfsx.html . 。 This program (when installed on Windows) can read Mac formatted HDDs. Also it's nice that with it you can browse to your Mac Folders and files and then extract them into a folder in Windows, allowing you to easily access them in Windows. Check it out.看看。
@.c –
Yes, I have a tutorial here on using hfsexplorer to access your OS X partition/drives from Windows while in Boot Camp. Great program.
Hello, i have followed your instructions however i am not getting the option of installing boot camp when i am inserting the disk and choosing the option ? can you please advise me of what to do ? as this option is not working for me ?
I have a Mac book pro with 1GB of RAM and Mac OSX 10.3 on it.
My grandmother gave it to me and I do not have a Mac install disk for it, nor can I afford to purchase one.
It does not have Bootcamp installed on it, and it isn't able to mount DMGs properly, it gives an error allong the lines of “invalad file system” when I try to mount something.
How can I install Windows 7 build 7068 as the primary OS of this computer?
Please help!請幫助！
the same problem, i wrote the disc on dvd, all files are there, but if i hit start install button, it says insert correct windows install cd :S
ATTENTION: Solution for problems with installing BootCamp drivers on Windows 7 included on Leopard installation disk (only for MacBook Pro – late 2008 model)
Problem:
At the beginning of the installation the MSI error 2229 occures!
Solution:
1.) Use the program InstEd (www.instedit.com) to open the BootCamp.msi (…/Drivers/Apple/…) package on the Leopard installation disk and drop the table “Verification”. Additionally search for the terms “=600″ and change them to “>=600″. Copy the whole directory tree from the Leopard installation disk (BootCamp drivers) to the harddisk and replace the original BootCamp.msi with the file just edited in InstEd. Open the preferences menu of the file and activate the vista compatibility mode.
2.) Open the preference menu for the file “AppleMultiTouchTrackPadInstaller” (…/Drivers/Apple/…) and activate the vista compatibility mode.
3.) Start the BootCamp driver installation with the file “setup.exe”.
Note: A sound driver error will occure during installation. Just ignore it. Everything will work fine after installation.
4.) Run the Apple Software Update and update the touchpad driver.
5.) Activate the right click option with 2 fingers in the bootcamp control panel.
Note: It will only work with 3 fingers when you activate the 2 finger right click option. Without the 2 finger right click option enabled the right click is not working at all.
6.) Activate Aero effects by running the speed test in the vista control panel.
Known issues:
Sound effects are not entirely pure and clear! Maybe there is a better driver available directly from the manufacturer of the soundcard.
I hope this little step-by-step guide helps!
ive installed build 7100 on my macbook aluminum, with its nvidia 9400m and it works the charm, only ahving issues putting bootcamp drivers on, maybe because its a 64 bit version, but had no issues in getting it here.
got it working, just had to manually install the drivers on disc then followed up with the 64bit bootcamp setup. running well so far.
Excellent help. Thanks mate.
PD: Well explained. :O
Hi all and thanks for all great tips above!
I've installed W7 RC 7100 on my macbook and all driver including the new updated boot camp 2.1 program and the multi touch driver following Daniel's instructions. My problem is that there is no option in the Boot Camp control panel to turn on the multi touch features. Any clues on what went wrong?
Regards, Da9l
@Da9l
The MultiTouch gestures supported under MacOS are not supported under Windows. Neither Windows XP or Vista nor Windows 7. There ist just the option to emulate the right click. To get the drivers for the MultiTouch trackpad working, install them as mentioned above and update them via the Apple Software Updater. Other things are not supported as far as I know. Besides I have to say that any version of Windows works best on the MacBook with an external mouse.
Does anybody have better experiences?
Ok, sorry for being unclear. Insted of “multi touch features” I should have written that I can't see any option to enable the right click emulation in the bootcamp controlpanel. I've followed the instructions above and even downloaded and installed the specified drivers explicitly but obviously, I must have done something wrong.
He's running Snow Leopard. Notice the sold blue scroll bars and the new stacks view beside the settings icon in the finder window.
@Zach –
I assure you, I'm not running Snow Leopard
The scroll bars are just a small hack and I'm not even sure what you're talking about re: new stacks view, but whatever it is, it's a part of Leopard (10.5.x).
@Da9l
I had the same problems at the beginning. I recommend installing only the drivers for the MultiTouch trackpad again (from the original Leopard install DVD with Vista compatibility enabled for the install file of the MultiTouch trackpad). After that run the Apple Software Updater again and update the drivers for the MultiTouch trackpad. Restart your Mac and now you should have the tab in the preferences. This should work … if not … hmm …. then, no idea.
Just got Windows 7 RC up and running on my MacPro.
Not able to connect my apple bluetooth mouse or keyboard. Just a spinning “connecting to device”. Had issues with this even in XP, something with passkeys.
Anyone seen any solutions to this?
Ben,
Did you install 64-bit or 32-bit? Gonna try it this weekend and want to know if they're any “gotchas”
@Eber Irigoyen
Windows Update should find the drivers for you. Alternatively, they come with the boot camp helper on the Leopard DVD.
About 64 Bit Windows 7
I have installed the 64 bit version of windows 7 on my 24″ Early 2008 iMac. The install went smoothly but there were some hitches installing apple's boot camp helper. Just running setup.exe resulted in an error about not supporting 64 bit windows. I needed run the Apple64 setup program, which is buried in the Apple folder on the disc. It gave me a warning about compatibility, which I ignored, and then I downloaded and installed the boot camp 2.1 update for Vista 64 (again with a compatibility warning, which I ignored). That gave me working sound, iSight, ir remote, and hardware other goodies like keyboard and mouse drivers.
The only 'issue' I have is that the boot camp app in the system tray and control panel require admin privileges, so I get a UAC warning whenever I try to open it.
Just a quick note on my experience…
Downloaded the iso, burnt it using disk utility, followed these instructions, and everything works perfectly. No weird heating issues, sound works, as does trackpad (though I wish the two hand scrolling was a little less sensitive and a lot more smooth, but even Mac programs like Camino often can't get it as smooth as it should be), keyboard lighting, etc.
I'm back in OSX now, as I much prefer the interface and “feel” of the OS, though Windows 7 is pretty nice from what I've seen. The only time I see myself using Windows is when I'd like to play a game that Crossover Mac doesn't work with.
My trouble is that I use a PC keyboard with my new Mac Mini and the 'Alt' key doesn't work as Leopard's 'Option key'. When logged into Leopard the Win7 partition doesn't show up hence no way I could select between 2 OS!
It appears that this is a known issue see http://discussions.apple.com/message.jspa?messageID=9389646#9389646
I followed your instructions. I now have an iMac that is dual-boot (OSX and Win7). Only problem is when I choose to boot into Windows 7 the EFI boot manager seems to hang for about 2 minutes, apparently doing nothing. After than Win7 starts up rather quickly. It's definitely something to do with the EFI boot manager/loader, and not Windows 7. This is very annoying for me as I am often switching between OSX and Windows (and NO!, I can't use a VM because I need access to hardware (web cams, USB ports, scanners etc…).
I should mention that both OSX and Vista64 (when I was dual booting with Vista 64) worked really well – either would boot up in less than 30 seconds.
Has anyone managed to solve the slow boot time problem?
@Ben
This is higher up in the comments – I also followed this and it worked fine for me too:
“I had to right click on the device when it was found in bluetooth sync part, and then there is an option for Human Control Devices. (Mice, Keyboards etc…)
I ticked that box and afterwards Windows 7 installed the Apple Keyboard and everything was hunky dory.”
As a side note, on my installation there is a check box in the 'Services' tab that says 'Drivers for keyboard, mice, etc. (HID)' just check that and it will work!
sfong15, If it is a Microsoft keyboard, the Microsoft keyboard software/pref pane for the Mac will let you switch the Alt/Windows keys.
People that end up with a .iso file on your DVD: use the Disk Utility in the Utilities folder on your Mac. Put your blank disk in, select it in the Disk Utility, then click the burn icon. It will prompt for the location of your ISO file. This will “burn the image” rather than “buring a disk with the image file on it.”
Hi !嗨！ An error came up when i run setup.exe on the leopard dvd, is there any way to solve the problem, or at least come back to Mac OS X ?
Hi!, when i run the leopard dvd it says that i must have windows vista or windows xp service pack 2 ? is there any way to solve the problem.. ? ？
@Jakob
Read my step-by-step guide above in the comments. It will help you to install all necessary things in windows 7.
I have tried installing both win7 x86 and x64 on my unibody macbook pro. I have had no luck getting the keyboard to work correctly. No eject and no fn key. Which means I can't log in (it's on a domain and requires ctl-alt-del). I've done the 2.1 boot camp with the upgrade from apple.com and I've even tried the 3.0 boot camp that is on the latest snow leopard build. No luck. Has anyone else had this problem and solved it?? Thanks.謝謝。
OK I'm seeing a lot of drivers installed from my original Leopard System Disc. It may have fixed the audio problem you warned about. Lots of other drivers. Where are these drivers coming from my Sys.Disc, or the Internet? If they are coming from the original Sys. Disc. will Windows7 update them as needed? I'm still doing the BootCamp drivers install so I don't know if this old Leopard disc is going to cut it.
Im running Windows 7 RC (Build 6.1.7100) on my MacBook Pro (latest single frame body).
When I try to install the BootCamp driver disc, it quits the installer with the error code 2229.
Anybody know, how to solve this?
ok so…確定這樣...
I have a 20 inch imac. I recentley installed Windows 7 using bootcamp. I am currently on my windows os and need to switch back to Mac os. My wireless ketboard is disconnected and it wont let me click options in boot up to go baack to mac os. I have connected a usb keyboard and mouse and it has the same problem but i am able to use it on my windows login. The bootcamp wont run on my windows since its a 64 bit.
HOW THE HELL DO I GET MY MAC OS BACKKK??????????
Musclyman246, hold down the option key when you start booting.
I installed Windows 7 RC on a partition for my new unibody MacBook Pro. I'm having problems with right click tho. I used to have no sound but installed the RealTek drivers and all is fine there. I installed the Apple update for the trackpad in Bootcamp, still no right click ability. I don't take a mouse everywhere, is there any way to get this to work?
Hi guys,嗨，
I have a unibody MacBook Pro and was able to successfully install the Windows 7 Beta back in February with no problems. I recently decided to upgrade to RC1 and am having problems with both installation and starting up once it's installed. Namely I get a black screen, completely blank when I try to boot into Windows. Any ideas?任何想法？
MIKE
Mike, I don't know if this will help you out, but make sure your partition is 20 gig or more. The OS loves disk space, my install failed because I originally didn't have enough.
@Sus
Maybe this can help.
http://snajd-it.blogspot.com/2009/03/error-2229-when-installing-bootcamp-on.html
Ok, I am using a 1.87 GHz iMac. I installed 7 fine, no problems, however, when i put my Leopard install disk in, nothing happens. I go to my comp, and check there, click the cd, and its blank. No error, nothing, just blank. So i go and DL the realtek drivers, try to run them, restart, still had driver issues. I tried the steps that post 100 contained, but got nowhere, since there is nothing listed in the CD. And i know the DVD works becuase just today I reformatted my drive becuase bootcamp required me too.
Any help?
i have a macbook with leopard and i installed the 64 bit windows 7 using the boot camp 2.1 and all the things is working fine what i did is… perhaps the other knows already i just wanted to share :
i inserted the max os x disk 1 then press open to view folder
then press right click the boot camp and choose open in new window
then press drivers to open it then press Apple to open it
in there there is boot camp 64 so what i did is press it and install by running the program because there is a message will pop up that compatabilty but i took the risk but it is worth all of my drivers is working and untill now it is working fine. If ever you already find out how just ignore my message
* *
just add in it
what i am saying is if you already finished installing the windows 7 64 bit and trying to install boot camp that was the next that you will do above
To BSOD people:
I had this problem trying to install 32-bit Win7 on my iMac 6,1 2.16Ghz with GeForce 7300 GT on a 24″. Specifically, I would get BSOD during the install with a 10sec memory dump showing an error with nvlddmkm.sys with code 116. Tried to boot Win7 in safe mode would not complete the install. So I booted to Mac and finished install using VMWare, uninstalled the graphics drivers from the Windows Device Manager so that it used just VGA drivers, then booted into Win7. From here I was able to run Win7 in low resolution but at least internet worked. I installed Nvidia's Win7 185.85 WHQL drivers, rebooted, and got BSOD. Back to safe mode and tried XP 181.22 WHQL someone suggested and still BSOD. Then I tried Vista 169.25 Forceware and it finally worked, however, I still have reliability problems. I left it overnight and found a BSOD with a new error so it seems to be specifically Nvidia driver issues.
Anyone else with any thoughts on Nvidia drivers?
For those who come after me: I just lost two hours of my life, figuring out that the SuperDrive must be plugged directly into the Macbook Air for it to be able to boot from the DVD. If it's plugged into the USB hub of the 24″ Cinema display, all you see is a grey apple logo for a very long time…
Mac newbie here, would appreciate some help on this:
Had some issues trying to follow the steps above, and can't figure them out. When starting the installation after doing steps 1 through 8, it completely skips steps 9 and outward, jumping right to the language/keyboard setup described in step 13. It asks for drivers, but I'm not even able to eject the W7 dvd…
After trying a couple of times (restarting from scratch), I just removed the partition and gave up. When I started my Mac today, it said “No boot disk (or device??) found…..”, so I had to restart again with the Option key pressed. I then got only the Macintosh HD option.
So, two questions:
1. 1。 Anyone know why it happens as described above when I try to install?
2. 2。 Is it possible that I have messed up my Mac OS X installation? Not too worried as I have a TM back up and have been considering a clean install anyway…
BTW, I have a early 2009 iMAC, 3,06GHz, 4GB RAM, ATI.
Anyone having problems with OpenGL on Windows RC7 using bootcamp? If so, have you come up with a solution for this one?
I have a intel 2 core macbook from 2007 with a mobile intel(R) 945 express chipset family card with WDDM 1.0 something…
I have tried to install the latest GMA driver for 32-bit windows vista from intel but the OS refuses to install it.
I have the same situation as Roger RS #135. My computer a early 2009 Mac Book Pro. Step 9 never happens. A black screen with “loading files” appears and the disc is read. Then a screen called “Insatll Windows” asks for language, Time etc. The only way I can get the disc out of the drive is to reboot and press the eject button at the after the chimes. What do I have to do to get to step 9?
I couldn't get the burn disc to be recognized during installation, so I used the disc utility instead of just sticking in burn folder and selecting burn.
I am having the same problem as #135 & #137. I got my install disc out. I have a MacBook purchased last October. I also had my Time Machine backup. You just shouldn't be doing this install without doing your backup first.
Everything worked just as you pointed out on my Mac Pro 8 core and Windows 7 is working great. Even better Fusion can run the same bootcamp partition of Windows 7 virtually,
For what it's worth, I got Windows 7 32bit to work great using these directions on my new Macbook Pro, EXCEPT… since it installed a bunch of drivers that were wrong (like an ATI driver and some other things), I made sure to tell Windows to update the video card driver and the network drivers itself before I let it reboot. Things seem to work great!
I got the new Macbook pro and i get the 2229 errror.
However i cant follow the above steps since there is no table called “Verification” in my Bootcamp.msi, i changed all the = 600 but still doesnt work.
Any ideas?任何想法？
Great Tutorial !
Why does Aero not work ?
That was ofcourse a reply to Daniel and his tutorial for the 2229 error.
Really frustrating. Glad anyone could help or point me in the right direction.
Cheers, great guide otherwise.
I have had my W7 partition reformatted to the MacOS ???. I decided to do a major cleanup, tossing out some downloaded apps that I have never used, lots of orphaned plists, renamed the W7 partition from “untitled” to “Windows” and did a bootable backup with CCC.
Now the partition shows up in Disc Utility as a MacOS Extended partition of 31.4 GB containing 45 files. When I fire up Boot Camp Assistant it does not show up as a separate volume and the following text is in the “Create or remove a Windows Partition” window, “This disk is your MacOS X startup disk and appears to have been partitioned by another utility. The only option I have then is to erase the whole disk. And of course Disk Utility will not recombine the two partitions. Any clues please on how to get the space back and start over?
Dude i just installed RC7 on my macbook1.1 it is working flawlessly. Sweet! i cant wait for Snow…
Maybe you should just grind your teeth and wait for Snow Leopard. Boot Camp 3.0 supposedly has a way better support for Windows 7 (and even HFS+) – and, for those too eager to wait a beta version of BC3.0 has already leaked to mininova.
Thought I'd continue this horrid trail of Windows 7 issues, via bootcamp
Gaming issues:
I've just spent all day installing windows 7 and games on my macbook pro (2009 unibody) within bootcamp- only to come to this barrier telling me that Direct X (when trying to run Call of Duty 4) has encountered an “unrecoverable error”. My audio is fine. None of my games within Steam want to load either. I'm wondering, is it something to do with Windows drivers (possibly video, heck, I really don't know) or my Mac?
Or do none of you game on a mac? :l
I discovered that a USB hub/card reader combo device was causing my Windows boot time to increase significantly (over 2 minutes). Unplugging this USB device solved the problem.
Just wanted to say thank you so much for the awesome Tutorial – we just installed Bootcamp & Win 7 on our Macbook Pro with no issues whatsoever! Brilliant. =) =）
@Charls post 34
had/have the same prob think its is because of the 64 bit and you /I need the 32 bit, Im getting that now and will post back later
yep that was the prob seems to be installing now
32 bit not 64 bit
Mac Newbee here.
I'm running an iMac 24, 3.06, 4gb, 500hd with Leopard (fully updated).
i'be been trying to install windows 7 via boot camp but get the same message everytime when I restart – “No bootable device – insert boot disk and press any key”. Have tried a number of times but it still doesn't pick up the disk. I have tried the disk on a mates macbook pro + also my PC, there doesn't seem to be a problem with the disk. Any suggestions guys? cheers乾杯
Hi I have just bought a new mac mini 2.0Gh with 2GB ram and 120GB HD will it run windows 7 32 bit fine or will there be problems with drivers for the monitor?
Hey I just want to thank you, I just followed step by the step of this walkthrough and everything worked perfectly. The Windows 7, 64 bit , is really fast and neat. The only thing i would say is uping the Recommended GB amount for the windows. I have the 64 bit and its a 10 GBs, i put about 44GB which left me with about 33 and change for games and movies. thanks again couldn't have done it without this site.
I have Windows 7 RC x64 installed on my PC. I am trying to get it installed on my new MacBook Pro 17 with Bootcamp. My OS X is all up to date and running Leopard. I am using the same DVD that I used to update my Vista x64 Ultimate to Windows 7. Yet, Bootcamp insists it can not find the installer on the DVD. Yet it is there setup.exe. Any ideas?任何想法？
I have a 2008 iMac (2.8 Ghz C2D and HD2600) and tried to install Windows XP in bootcamp. The partitioning in the Bootcamp utility works fine, so I set it to 32GB, put in the XP disc (Wich is 32bit + SP2) and click “Start Installation”. Now my iMac is going to reboot, and a black screen with a with blinking underscore (_ <that one) appears. The disc spins a bit and than… nothing. After a few reboots, the install proces finaly starts and everything is going fine untill the reboot after the format (NTFS). Than the nice error; “disc error. press any key to coninue” appears, and I can start it all over again. I tried it over 10 times now, and it still doesnt work.
So I thought, maybe my fresh burned Windows 7 copy would do the trick, but this one doesnt even make into the install process. The screen remains black with the blinking underscore, and that's that.
Am I doing something wrong, or are my Windows discs just screwed? They do all work perfectly on a 'real' PC afterall…
Mike, sounds to be exactly the same problem I have. (although don't get excited as I don't no the cure either). I don't think it's a disk problem as i've tried numerous disks also.
I keep getting the “disk error. press any key to continue screen to continue” + sometimes also the blank screen with blinking underscore.
Has anyone out there got a solution to our problems?
Well. Now my iMac won't start the install process at ALL. Both Windows 7 and XP won't start the Install. Does this stupid Bootcamp thing ACTUALY work?
just wondered: is it possible to use for example “poweriso”?
how much space do you need on your CD/DVD to burn the W7 ISO image?
Worked great! Thanks for the walkthrough!
I had a Gateway 505GR that recently died of mother board failure, but I removed all the usable parts, like the main drive, DVD burner etc. I use a Mac Pro and was wondering if when I upgrade to Leopard OS X, would it be possible to make the PC drive a USB external, and use boot camp to use the drive with all the PC info and system software as the PC Partition? Instead of partitioning my Mac Drives?
Troubleshooting Guide To Boot Camp 2.1
—————————————
With a Mac Book Pro Os X Leopard and Windows XP Pro. I am providing this guide because I spent literally days fixing various problems most related to bad drivers. If I can save you the Nightmare I had it will be worth my time to write this guide for you!
Install Windows XP on FAT32
—————————-
While using Mac if you ONLY want to be able to read XP files (NTFS or FAT32) then skip this section because OS X Leopard is able to correctly detect NTFS and FAT32 disks in READ ONLY mode.
However if you want to be able to read & write XP files (NTFS or FAT32) in Mac then you would install a program like Paragon NTFS or NTFS-3G. However once you do this you will experience this Problem:
Windows partition missing from Mac 'startup disk' menu when using NTFS-3G or Paragon NTFS in Mac (Bootcamp 2.1 fails to fails to show windows disk in startup menu after installing NTFS-3G or Paragon NTFS)
It is unclear who is to blame for this bug. Both Paragon and NTFS-3G DO NOT KNOW HOW TO FIX the problem so the finger is pointed at this being an Apple Boot Camp bug! Don't hold your breath for a bug fix from Apple because I saw people have been having this problem for several years. It would be nice if the Apple cared a bit more about the Windows people they are trying to win over but anyway we are greatful for Boot Camp (even if it is as buggy as hell).
First my personal experience, I had it working perfectly before and after loading NTFS-3G onto my Macbook. I also had it working perfectly with Paragon NTFS. Then after a few months I reinstalled XP. Suddenly it no longer worked! Very fustrating when you KNOW it can work perfectly. It took me several days to figure out that this due to the fact that I had first installed XP and formated as FAT32 but the second time had installed XP and formated as NTFS!!
ONLY KNOWN Solution for this problem :
Format XP using FAT32. Apple understands FAT32 and everything will work as normal!
Do not format using NTFS as Apple does not understand it and XP will be missing from the 'startup disk' menu!
NTFS users can use this work around solution :
Install Paragon NTFS and use Paragon to set your boot partition and then reboot.
The least desirable solution :
Hold the ALT key down while booting and choose XP.
Install Boot Camp version 2.1
—————————— ----------
Using the the disc that comes with your Apple Mac Book Pro.
After Installation update the following drivers to these versions or newer :
Broadcom 802.11 Wireless (5.10.91.8) (4321AG) (*)
Realtek HD Audio R2.27 (5.10.0.5874) (2009-06-16)
NVIDIA GeForce 8600M GT v185.85 (07.05.2009) (v6.14.11.8585)
Note (*)
———
Broadcom 802.11 Wireless drivers must be force installed to 4321AG. You can do this after installation by using the device manager and updating the driver to 4321AG. These drivers are 'borrowed' from another Broadcom 802.11 Wireless device since an update for the BCM 4328 drivers are not available from Apple or Broadcom.
Unresolved Issue
—————–
Back lighting of keyboard is not working in XP. Apple Bug?
Problems Fixed By Doing These Updates
————————————–
Bootcamp KbdMgr.exe Latency Problems Slowing Your XP
—————————————————–
I could not fix this problem but found an easy work around.
First check if your latency is being affected by the 'KbdMgr.exe' driver. Use 'DPC Latency Checker'. If the latency is green then you are OK! Skip Adead. If your latency is red then kill the 'KbdMgr.exe' in the task manager and check the latency. If it drops then this work around applies to you.
Open the Boot Camp directory in your Program Files directory. The real 'KbdMgr.exe' is renamed to something else like 'Boot Camp.exe' so that you can use it to boot back to Mac when you want to. Create a shortcut to the new name from from your desktop.
Then create an empty text file and give it the name 'KbdMgr.exe'. This will allow your PC to boot normally and run normally but will prevent Boot Camp loading automatically.
Wireless Problems
—————— ------
The Broadcom 802.11 Wireless drivers for the (BCM 4328) are unstable and often loose connection or freeze or stop working for no reason. The driver that causes this problem is version 4.170.25.12 (20/09/2007) BCMWL5.SYS
Sound Problems
—————
The Broadcom 802.11 Wireless drivers (BCM 4328) drivers cause sound problems. Music or sound stutters or slows on playback. The driver that causes this problem is version 4.170.25.12 (20/09/2007) BCMWL5.SYS.
Apple Touch Pad Problems
————————-
The drivers supplied on the Boot Camp disc from Apple work but do not install correctly for some unknown reason but the drivers do work once you get them installed. The driver install files are :
AppleMultiTouchTrackPad.exe
AppleTrackpad.exe
Your Apple Touch Pad Drivers are working when Device Manager shows :
Apple MultiTouch
Apple Multitouch Mouse
And you can do a right click by holding two fingers on the touch pad and doing a click
You can scroll up and down using two fingers. Adjust the wheel scrolling speed to one line at a time under mouse properties in the control panel.
——————————————————————–
To install the drivers correctly use the Device Manager and look under Human Interface Devices. You should find two Apple 'Touchpad' drivers listed with a (Yellow !) change these drivers to use the 'USB Human Interface Device' driver. Then install both 'Apple MultiTouch TrackPad' and 'Apple Trackpad'. This should automatically update the 'USB Human Interface Devices' to the correct working Apple drivers. This worked for me. However if you are still having problems you can try the General Driver Installation Tips.
——————————————————————–
General Driver Installation Tips
———————————
Uninstall all devices drivers that are failing and reboot.
——————————————————————–
Make sure all non-Apple drivers are working properly. If not try and fix them first. I had a Logitech Mouse driver that was not working and suddenly when I fixed that at least half my Apple drivers started working. There was probably a resource conflict or some other relationship between the Logitech driver and the Apple Drivers.
——————————————————————–
If any driver is giving errors delete the physical driver file and reinstall! This is very useful when nothing you seem to do works. Sometimes you must physically delete the old driver file so that windows will correctly install the new one. I don't know the technical reasons for this only I found that this worked for me when I had to replace a Logitech Mouse driver after hours of fustration.
——————————————————————–
If you are busy in Device Manager and working with 'Human Interface Devices' and accidentally uninstall one of these drivers which are related to your mouse driver your mouse will stop working. Don't reboot, just unplug your mouse and plug it in again and Windows will autodetect a new mouse driver for you.
——————————————————————–
If you have been messing around and installing many drivers and your drivers still fail then try roll back the drivers until you can't anymore and then try one of the above methods again.
——————————————————————–
Nice guide! Thanks!謝謝！
But you should mention that Windows 7 takes 14,5Gb on your drive, not as you say “You might be able to get away with going as low as 6GB”
I installed Windows 7 ultimate, and was left with only 5,2 Gb of free space on my 20GB partition.
The sound issue….I already have the latest Realtek drivers isntalled, but the sound still doesn't work. I tried inserting the bootcamp CD and doing it through there, but windows tells me “Boot Camp x64 is not supported on this compute model” which is BS because I just used it on my Mac Software on the same computer. SO I just found the “RealtekSetup.exe” file on the OS X LEopard CD and ran that, but it'd just “updated” my sound driver to the one I currently have already. And the Realtek site is broken, you can't download the drivers manually there. I think I'm screwed?
Worked great! Awesome job! But when I went to install the drivers, it says that “boot camp x64 is not supported on this computer model”, what do I do?
Hi,嗨，
We are trying to install W7 on my Macbook, but with no success. We have manage to create a big enough partition for W7 via Boot Camp, but it does not want to read the exe file to start the W7 installation. It shows the files on the disk, but if you click the file, nothing happens.
Any ideas?任何想法？
Wanda, BootCamp will ask you to stick the Bootable Windows Install disk in the drive. After you confirm you did that, it will reboot the machine and your instillation process will begin. You can NOT run the .exe in Mac OS.
Hi, good walk-though thanks,
I had the same problem as a few of you regarding the BSOD on the 24″ white iMac. I managed to get around it by doing the following (this is from memory so forgive me if i miss a step)
After the BSOD allow the iMac to restart with the Win7 install DVD in
You will get a message saying press any key to boot from CD, do this and you will go back in to the Win7 Installer.
Select you county and click next but don't click the “install now” button
Instead click Repair My Computer
You will be presented with a list (after some time) of windows installs on the iMac select the one you just did (as I've only got os x and win7 I only had one I don't know if older os's show up)
From the Repair options presented select command prompt
navigate to the c:\windows\system32\drivers folder by typing
c:
cd windows
cd system32
cd drivers
now you rename the broken driver file by typing
ren nvlddmkm.sys nvlddmkm.old
close the command prompt and restart the computer
you should be able to continue with the setup
Will see how i get on with drivers but so far so good.
After installing Windows 7 (64-bit) on my unibody MacBook, at step #18, I ran into the error message “Boot camp x64 is not supported on this computer model”.
To get around this, explore the OSX disc while you are in Windows 7. Navigate to Boot Camp -> Drivers -> Apple. Then open “BootCamp64″ and it will install all the drivers (I assume if you are using the 32-bit version you should open “BootCamp” instead of “BootCamp64″). All the drivers installed in a few moments!
Hope this helps.希望這有助於。
Hey, I've read through the comments but I couldn't really find an answer to the problem with the Boot Drive error and the USB Keyboards not working. There was a solution to upgrading from vista or XP but not from booting from the disc and using bootcamp.
The computer I have is a 24″ iMac running 10.5.8; 2.4 GHz Duo
As said earlier in the comment thread, a black screen comes up saying
1. 1。
2. 2。
Then asks for aCD-Rom Boot option but the keyboard doesn't work.
Okay, I found a solution to the Apple Wireless Mighty Mouse/Keyboard issue:
Quote “http://discussions.apple.com/thread.jspa?threadID=2001613&tstart=0″
1 – Load the 'Add a device' dialog for bluetooth
2 – Wait until your device is listed and just select it (highlight only)
3 – Right-click (or press 'Alt+Enter') the highlighted item and select 'Properties'
4 – Go to the 'Services' tab and wait until it lists a 'Drivers' check box
5 – Place a check mark in the box and click 'Apply'
6 – Click on the notification balloon that pops up on the right end of the taskbar to watch the progress of installation (it will probably say something like 'Windows Update..'
7 – When done, your device should disappear from the list and should now have functionality (although from my experience not exactly perfectly consistent pairing).
Try and see if it works, folks. It works on my Macbook (Late 2008).
I would like to take this time and thank you for this tutorial….it takes alot of time to create a tutorial of what you did and you have pictures for almost everything. Great stuff keep it up!!!!!!!1
Well, I have the disc but every time I try to install windows 7 through bootcamp it always says that it cannot find the windows installer. I'll be able to get another disc tomorrow but I don't know if the disc is the problem.
What am I doing wrong? What version of bootcamp am I supposed to have?
Forgot to say that I'm using Leopard 10.5.8
Michael, could be that you burned the ISO file to the disk instead of burning the disk using the ISO image.
Well, to be honest, I'm not sure which one I did because I don't know the difference…
So, could you please explain how I can burn the disk using the ISO image? At the moment I think I just burned the ISO file because all I did was copy+paste the file onto the disk and then burn it onto the disk…
So, thanks in advance for telling me how to burn the disk using the ISO image.
The type of file that I burned onto the disk was an ISO Disk Image…
If it makes any difference to you, on my PC the installer starts up right away when I put the disk in…yet on my mac it says boot camp cant find the installer disc…
Is there something else I need to burn onto the disk besides the windows 7 things?
What exactly did you burn onto your disk?
Michael,
Burning a disk image in Mac OS: http://lmgtfy.com/?q=mac+os+burn+iso
I don't know how your PC starts the installer when you put the disk in. Maybe what I think the problem really isn't.
Aha, I see…I was using .iso file and it needed to be .dmg
So, you were right…It's the wrong file type
Everyone give it up for Ed Hayes the miracle worker! =P Thanks man, I really appreciate all the help.
Thanks Michael! Glad I could help, and I hope its working!
Leave a Comment發表評論