Parte 1 di questa lezione privata guidato voi through usando RegistryBooster 2009 per aumentare stabilità e migliorare la velocità del vostro pc. La parte 2 copre un altro prodotto dalla stessa gente - DriverScanner 2009.

DriverScanner 2009 esplora automaticamente il vostro pc per i driver di dispositivo antiquati ed allora i trasferimenti dal sistema centrale verso i satelliti ed installa tutti gli aggiornamenti. Questa lezione privata li guiderà through usando DriverScanner 2009.

In primo luogo una brevi priorità bassa e spiegazione. I driver di dispositivo sono lime che permettono che i vostri fissaggi di pc (video scheda, l'azionamento duro, la scheda sana ecc) comunichino con il vostro sistema operativo (Windows). I lotti dei driver dei fissaggi sono aggiornati frequentemente; per fornire efficientemente massimo per quella parte di fissaggi e riparare qualsiasi insetti che possono a volte causare i programmi e perfino il sistema operativo all'arresto. Così avere i driver più aggiornati è sempre nel vostro interesse - certamente ha il significato ottenere il la maggior parte dai vostri fissaggi come possibili.

Qui è come potete usare DriverScanner 2009 per assicurarti che tutti i vostri driver di dispositivo sono aggiornati.

1. Inizi fuori trasferendo ed installando DriverScanner 2009. Come RegistryBooster 2009 e SpeedUpMyPC 2009, DriverScaner 2009 non è libero. Ma appena come entrambi quei programmi, vale il costo ed è un prodotto che l'aiuto semplice si leva in piedi dietro.

   L'installazione del DriverScanner 2009 è molto diretta - scatterete appena “dopo„ un mazzo di periodi. Una volta che l'installazione ha completato, assicuri Ora faccia funzionare Uniblue DriverScanner 2009 la scatola è controllata e scatta Rivestimento tasto.


scatti per ingrandire

2. DriverScanner lancerà…



3. ed immediatamente cominci il primo di due esplorazioni del vostro pc. La prima esplorazione determinerà quali driver di dispositivo i vostri fissaggi attualmente usano. It can take a couple of minutes to complete, but not to the point where you’ll get bored.


click to enlarge

4. The second scan will only take a few seconds.


click to enlarge

5. Once both scans have completed you’ll be presented with a list of drivers on your system that have updates available. As indicated by the screenshot below, DriverScanner 2009 found updated drivers for my monitor, mouse and sound card.

   If you haven’t purchased RegistryBooster 2009 yet, click the Register now button in the bottom left corner of the window to do so. If you have purchased it, skip down to step #7 below.


click to enlarge

6. Click the Purchase online button.



7. Once you’ve completed the online purchase process (which is very painless) – enter your serial number in the space provided and then click the Activate now button.



8. Click OK after successfully registering DriverScanner 2009.



9. Now, before you download and install any driver updates, it’s a very good idea to backup your existing drivers first. Though the chances are that you won’t need a backup, if something does go wrong, you’ll be really happy to have it. Attempting to recover from an improperly installed or corrupted driver can be a real hassle. So. Select the Backup tab of DriverScanner 2009. Make sure that the Perform a complete backup of all your drivers box is checked and then click the Backup selected button.


click to enlarge

10. It’s at this point I’d suggest grabbing a cup of coffee. Backing up the drivers can take quite a while, and there’s a very good chance that it will appear as though DriverScanner 2009 has completely stalled or frozen. It hasn’t. Just give it time. Maybe play a game of Solitaire.


click to enlarge

11. Once the backup has finished, you should get a Your drivers have been backed up successfully message.


click to enlarge

12. Now select the Driver scan tab. Before you begin downloading and installing new drivers, check the Level for each one. The levels are: Safe to install, Moderate and Risky. If DriverScanner 2009 determined that any of your updatable drivers are Moderate or Risky (Risky in particular) – you may not want to update them. At the very least, you’ll absolutely, without question, want to make sure you have a full driver backup created first.

    If all of your drivers are set to the Safe to install level (as indicated in the screenshot below), click the Download all button. If some are labeled Moderate or Risky, and you don’t want to chance a problem, click the Download driver button next to each one labeled Safe to install.


click to enlarge

13. Generally, drivers aren’t large files, so the downloads shouldn’t take very long. The downloaded percentage will display as each one downloads.


click to enlarge

14. After all of the drivers have been downloaded, an Install driver button will appear next to each one. Click one of them.


click to enlarge

15. Initially a ‘warning’ message will pop-up reminding you that you should backup your drivers first. Since you’ve already done that (right?!) – click the Install driver button.


click to enlarge

16. And now the driver will install. Usually, you won’t even notice that anything is happening, other than the “installing” message displayed in DriverScanner 2009. Note: this isn’t always the case, as outlined in step #18 below.


click to enlarge

17. After the driver has been installed, you’ll see the status has changed to Up to date. Repeat the previous 3 steps to install each additional driver.


click to enlarge

18. With some drivers, when you click the Install driver button, another window will pop up.



19. That means the driver has its own installation package, and you’ll have to follow the steps to install it. Generally it’s just a case of clicking ‘Next’ a bunch of times.


click to enlarge

20. Once all of your device drivers have been updated, select the Overview tab. You should see the message All drivers are UP TO DATE in the left pane.


click to enlarge

21. Should the need arise, or you notice that the hardware that had device drivers updated isn’t behaving correctly (sound doesn’t work after updating the sound card drivers etc) – select the Restore tab. Select the most recent backup if you have more than one, click Next and follow the on-screen instructions. This will revert your drivers to the previous (working) versions.


click to enlarge

22. Finally, select the Settings tab. From here you can adjust the DriverScanner 2009 options. The defaults are fine, but I prefer to have programs always close when I click the “X” – so I changed that setting.


click to enlarge

23. That’s it, you’re done! I’d suggest running DriverScanner 2009 once a month or so. You won’t always have updates for your drivers, but it’s good to have the latest installed as quickly as possible.