Эта консультация примет вас каждая одиночная шаг дороги до устанавливать использование Ubuntu 7.04 (пыжик Feisty) Desktop 3.0 параллелей (Строение 4128) на осмий x. In other words, даже ваши родители последовали за вперед.
Примечание: если вы ищете помощь устанавливая Ubuntu 7.10 (Gutsy Gibbon) параллельно, то см. эта консультация.
Эта консультация для любого с макинтошем основанным Intel любознательон о Linux - специфически Ubuntu, и имеет около час, котор нужно убить (не включая время, котор оно принимает к download Ubuntu).
Шаги и screenshots используемые для этой консультации специфически к Desktop 3.0 параллелей (Строение 4128) бегущ на MacBook Pro с осмием x (10.4.10). При сказанное то, они будет близко идентичен если вы имеете макинтош Pro, то, макинтоши мини, основаны MacBook или люб друг Intel макинтош Apple.
Ubuntu будет свободно, открытым источником Linux-основано оперативная система с ясным фокусом на потребителе и usability (он «справедливая работа»). Когда вы заканчиваете вашу установку Ubuntu ваша система немедленно годна к употреблению. На desktop вы имеете полный комплект применений урожайности дела, применений интернета, применений чертежа и графиков, и игр. Для больше информации на Ubuntu, посещение http://www.ubuntu.com/ubuntu.
По мере того как вы можете заметить, здесь на Simplehelp мы часто рекомендуем средство программирования, и 90 что-то проценты времени что средство программирования свободно. Параллели не свободно, но оно реально be worth цена. Оно позволит вас побежать другие оперативные системы (как Ubuntu) на вашем макинтоше - без потревожиться о любом из ваших случайно будучи уничтожанным установок, документов или архивов осмия x. И если вы не любите Ubuntu, то вы можете погань оно и продолжить как оно никогда не случался.
Одно другое преимущество (майора) использования параллелей что вы бежите другая оперативная система (in this case Ubuntu) пока Осмий x бежит. Вам не нужно повторить старт вашего компьютера each time вы хотите переключить от осмия x к Ubuntu и наоборот.
Прочитайте больше о параллелях здесь:
Parallels Desktop 3.0
If this is the first time you’re using Parallels, the Wizard will launch automatically. If it’s not the first time you’ve used Parallels, launch the Wizard by selecting File -> New…
In the OS Type: select Linux and in the OS Version: select Other Linux kernel 2.6. Click Next > to continue. NOTE: In the latest version of Parallels, there is an “Ubuntu” choice from the menu. If you’re using the very latest version of Parallels, select it rather than Other Linux kernel 2.6.
The default virtual hard disk size will be set to 32000MB (roughly 32GB). If you opt to use an Expanding virtual hard disk, you won’t actually use 32000MB right away, rather, Parallels will allocate space as it’s needed, up to 32000MB. The defaults are a good option. Click Next > after you’ve made your selections.
Now give this virtual machine a name - anything will do, but something descriptive is always a good idea. If you click the small More Options arrow, you can also choose where the virtual machine files will be stored, and if Parallels should make a shortcut to Ubuntu on your desktop. Click Next >.
Here you’ll need to decide if you want to allocate more performance to the virtual machine (Ubuntu in this case) or OS X - when the virtual machine is running. Once you’ve made a choice, click Next >.
Ubuntu will start up. Because the .iso file you downloaded is a “Live” image, you can actually play around with Ubuntu right now. If you’re not connected to the Internet…
Enter your Name, the name you wish to use to login, a password and whatever you want to call your “Ubuntu computer” in the spaces provided. Once again, click Forward.
Go get a cup of coffee or your beverage of choice. This can take a while.
When the installation is complete, choose Continue using the live CD instead of Restart now (because we’ll want to make a few changes before using Ubuntu again).
Power off Ubuntu by clicking the red “Log off” button in the upper-right corner of your Ubuntu desktop.
And select Shut Down from the menu.
Don’t be too surprised if Ubuntu freezes at some point, and the video seems to ’scramble’. Use the keyboard-combo to ‘release’ your keyboard and mouse focus from Ubuntu (it will be displayed in the very bottom left corner of your Parallels window). Use the red square Stop Virtual Machine button to completely power off Ubuntu.
Start up Ubuntu again, and after you get to the Ubuntu desktop, use the keyboard-combo to return your keyboard and mouse focus to OS X. Select Actions from the Parallels menu, and Install Parallels Tools… from the drop-down list.
You’ll get a warning/about pop-up. Click OK to close it (after you read everything, of course).
Select Applications -> Accessories and finally Terminal.
Enter the command:
sudo sh /cdrom/parallels-tools.run
and enter your password when prompted. After a few moments you’ll be returned to the command prompt. Make sure that the line above the prompt reads Please restart your Xserver or reboot whole VM, and then close the Terminal window. Press ctrl + alt + delete to restart your Xserver (or use the log out button). Once you sign in again, you should notice that you can move your mouse (and keyboard focus) in and out of the Ubuntu/Parallels window without having to use the keyboard combo.
Heya StumbleUpon visitor, I hope your day is going well and your boss thinks you're hard at work. If you liked this page, please feel fre to give it a thumbs up, I'd be hugely appreciative.
When selecting “OS Version”, why select “other linux version 2.6″ instead of “ubuntu” (which i think was available when you wrote this tutorial). What does this effect?
I used the Ubuntu linux option and had no troubles at all. Sound came up, networking — the rest of the tutorial was great, but this little difference didn’t seem to matter.
Using a MBP 2.2 Dual Core with 10.4.10; I am not getting the browser pop at step 3 of the parallels tools install. Can’t mount the CD-ROM either (although it’s connected). Lower right of parallels CD icon states Connect to vmtools-linux.iso and it’s grayed out. So it looks like it’s connected to the right iso. I just can’t mount it for some reason. Using
sudo sh /cdrom/parallels-tools.run
I get
sh: Can’t open parallels-tools.run
when I run mount cdrom I get
mount: can’t find cdrom in /etc/fstab or /etc/mtab
Am I missing something here? I’ve followed these steps exactly three times to no avail. Thanks everyone!
Thanks for the excellent tutorial! One small troubleshooting tip - the install froze for me on installing an intel “piix” hardware driver. Decreasing the amount of memory allocated to the virtual machine (from 1024 to 512K) solved the problem.
Installing Ubuntu 7.10 on Parallels 3.00 build 5160 gets to a point where it stops installing with this error: The display server has been shut down about 6 times in the last 90 seconds. It is likely that bad is going on. Waiting for 2 minutes before trying again on display :0. I am selecting the Linux OS install and Ubuntu Linux in the install process. I have repeated the install procedure 5 times at least with the same results. I have also tried the Ubuntu Safe Graphics mode install with the same results. Any thoughts?
You’d need to install Parallels Tools - which I’m not 100% sure works in 7.10 yet (I haven’t installed it yet, but will in the next few days). In fact I don’t even have Parallels installed right now (just upgraded to Leopard and haven’t reinstalled everything yet - I decided to wipe my drive and upgrade rather than just update). But I think if you select something like “Tools > Install Parallels Tools” from the Parallels menu, it’ll either work (and then you can copy paste/drag drop files between the OS’s) or it’ll be gray’ed out (because Parallels Tools isn’t ready for 7.10 yet).
If you already have another Parallels VM running (say, Windows), at least with Production 3.0, you can’t get the network up in Shared Networking. Bridged Networking for the ubuntu machine makes this all work out ok though, as long as you don’t mind that this will show up on your network as another server alongside your Mac OS X box.
Everything seems to work, but not internet. On a macbook pro I can surf wireless using Windows , but not linux (kubuntu 7.04).
How about the kubuntu 7.10 release? why it does not work?
Thank you,
Great guide, install went fine but unable to get parallels tools to install. I have the same problem as mark s:
sudo sh /cdrom/parallels-tools.run
gives
sh: Can?t open parallels-tools.run
I can see the cdrom in the file browser and terminal but it just wont install. Sounds like it suddenly worked for mark but not for me. Also 1024×768 is highest res available. If anyone has ideas that would be great.
Wow, I was up late trying to get parallels tools installed (see last comment) and I left ubuntu running on my macbook with firefox open. I slept in this morning and when I woke up my girlfriend was using the macbook, still running ubuntu. I said, “oh your using linux, what do you think?” and her response was “Am I?”. She didn’t even realise it wasnt OS X. I’m not making this up.
i also face the same mentioned problem with installing parallels TOOLS:
kailash@kailash-laptop:~$ sudo sh /cdrom/parallels-tools.run
[sudo] password for kailash:
sh: Can’t open cdrom/parallels-tools.run
kailash@kailash-laptop:~$
Bad luck with Ubuntu 7.10 i386 installs with Parallels 3.0.
At first I picked the Linux/ubuntu option with 1gb of ram and 16mb video. The install would freeze while loading the cupsd file. I get this regardless of live or text install mode.
512ram with 4mb of video:
Receives “The display server has been shut down about 6 times in the last 90 seconds” error. Never fixes it self. I get this regardless of live or text install mode.
1gb ram with 16mb of video and amd64 version of ubuntu:
Receives “Your cpu does not support long mode” error. I find it odd since on the ubuntu site, it says to pick that version if you have an intel pc. I get this regardless of live or safe mode.
1gb ram with 16mb of video and i386 alternate version of ubuntu:
Picked text install and success!!
Glad I have Fios to download a new ubuntu OS quickly each time one didnt work or I would have given up a long time ago. I hope this info helps someone.
After spending about 2 hours trying to solve this problem on my own after running into the same error that everyone else such as:
sudo sh /cdrom/parallels-tools.run
gives
sh: Can?t open parallels-tools.run
My final solution was to not use the Ubuntu Installation CD to access the parellels-tools.run file.
Instead
1. I copied the vmtools-linux.iso file from /Library/Parallels/Tools/vmtools-linux.iso
2. pasted it onto my desktop
3. ran ubuntu in parallels and at the bottom right, I clicked on the CD icon and chose Connect Image. I then selected vmtools-linux.iso
4. restarted ubuntu, and before logging in, I followed these steps
5. Start Ubuntu, wait till X-server starts;
6. Press Ctrl+Alt+Backspace simultaneously;
7. Press Alt+F6;
8. login with your root ID/password
9. Press Control + Option to access mac OS mouse
10. Clicked on Actions > Install Parellels Tools
11. Then I opened the terminal and entered:
cd media/cdrom0/
12. then entered:
sudo sh parellels-tools.run
And then it finally worked. I know there are shortcuts to these steps, but I did it the long way on purpose.
Well, I hope this helps others who haven’t found a solution.
just a warning to all the Noobs like me out there.
I spent hours on installing everything from 7.04 through 7.10 and everything was working perfectly in Parallels.
But then I had this wonderful idea to upgrade to 8.04 LTS.
NOT A WONDERFUL IDEA
I then suddenly discovered video driver problems and parallels tools just disappeared and I wasn’t able to install them.
So, I’m now having to start all over again with installing 7.04 from the beginning.
Take this lesson learned from me and be sure to find support documents on upgrading to 8.04 before you do it. Because after I did it, I found out that other people were running into this problem.
I did all the steps of installing this via parallels on my Leopard Macbook Pro and then got to the parallels tools step. When it prompts me for my password, I can’t type. I’m not sure if this is just a problem on my computer specifically but no matter what I try it won’t work. Any ideas?
My final solution in the end was to get rid of my Boot Camp partition and then install a free open source PC emulator from Sun Microsystems called Virtual Box http://www.virtualbox.org/ and on that, I installed Ubuntu.
Its useful because I don’t have to reboot my computer in order to use Ubuntu. Plus I can go to full screen mode and it’ll appear as if I’m not using an emulator. The benefits of this is that I can run the latest version of Ubuntu and all of my special function keys work correctly the way they should.
I meant to say that I got rid of Parallels Desktop and then installed the free open source Virtual Box from Sun Microsystems. Its fully operational and has no problems with the latest version of Ubuntu.
thx it is working perfectly but its a bit slow so im ordering the cd and using it on my old toshiba i would have just downloaded it but my toshiba dont have wi-fi so i cant download it on my network
{ 7 trackbacks }
{ 41 comments… read them below or add one }
Thank you for an excellent tutorial. I’m new to Ubuntu, to Parallels, and not too experienced with OSX. The tutorial set aside many of my concerns.
I can’t seem to work the terminal. it says it couldnt open it. why is it?
Hi. Thanks a bunch for the tutorial.
When selecting “OS Version”, why select “other linux version 2.6″ instead of “ubuntu” (which i think was available when you wrote this tutorial). What does this effect?
Thanks again,
john
I used the Ubuntu linux option and had no troubles at all. Sound came up, networking — the rest of the tutorial was great, but this little difference didn’t seem to matter.
Using a MBP 2.2 Dual Core with 10.4.10; I am not getting the browser pop at step 3 of the parallels tools install. Can’t mount the CD-ROM either (although it’s connected). Lower right of parallels CD icon states Connect to vmtools-linux.iso and it’s grayed out. So it looks like it’s connected to the right iso. I just can’t mount it for some reason. Using
sudo sh /cdrom/parallels-tools.run
I get
sh: Can’t open parallels-tools.run
when I run mount cdrom I get
mount: can’t find cdrom in /etc/fstab or /etc/mtab
Am I missing something here? I’ve followed these steps exactly three times to no avail. Thanks everyone!
Nevermind. I had to do the extra step of double clicking the .iso in the browser to ‘open’ it I guess. All good now.
excellent tutorial…one of the best. thanks a lot. I am now up and running with ubunto, parallels and OSX
Great guide! Easy to follow and thorough. I’m now happily running Ubuntu on my MacBook.
not working for me. tried 5 times its says boot from hard drive…
I have absolutely no experience with linux
help!!
Thanks for the excellent tutorial! One small troubleshooting tip - the install froze for me on installing an intel “piix” hardware driver. Decreasing the amount of memory allocated to the virtual machine (from 1024 to 512K) solved the problem.
Installing Ubuntu 7.10 on Parallels 3.00 build 5160 gets to a point where it stops installing with this error: The display server has been shut down about 6 times in the last 90 seconds. It is likely that bad is going on. Waiting for 2 minutes before trying again on display :0. I am selecting the Linux OS install and Ubuntu Linux in the install process. I have repeated the install procedure 5 times at least with the same results. I have also tried the Ubuntu Safe Graphics mode install with the same results. Any thoughts?
Mike
This very nice install procedure works for Ubuntu 7.04. But does not seem to work for Ubuntu 7.10.
Mike
Everything works, I just cannot copy/paste between os/x and linux. I have installed 7.10 and not 7.04, would that make any difference?
I am writing this in Ubuntu 7.04.
The tutorials were absolutely superb.
It just worked like it should on a mac!
@Breckenridge:
You’d need to install Parallels Tools - which I’m not 100% sure works in 7.10 yet (I haven’t installed it yet, but will in the next few days). In fact I don’t even have Parallels installed right now (just upgraded to Leopard and haven’t reinstalled everything yet - I decided to wipe my drive and upgrade rather than just update). But I think if you select something like “Tools > Install Parallels Tools” from the Parallels menu, it’ll either work (and then you can copy paste/drag drop files between the OS’s) or it’ll be gray’ed out (because Parallels Tools isn’t ready for 7.10 yet).
Just installed on my nw 24″ iMac. Excellent instructions, and easy as pie. Thanks
P.S. I just installed 7.0.4, which is what I use on my regular Linux machine. I didn’t try 7.10.
Yeah…..the same seems to be happening on my comp as well…..
What’s the trouble??
If you already have another Parallels VM running (say, Windows), at least with Production 3.0, you can’t get the network up in Shared Networking. Bridged Networking for the ubuntu machine makes this all work out ok though, as long as you don’t mind that this will show up on your network as another server alongside your Mac OS X box.
Worked perfect on my MacBook 2GHz 1 G Ram running OSX 10.4.10 running Parallels Build 5610. Thanks a bunch.
Everything seems to work, but not internet. On a macbook pro I can surf wireless using Windows , but not linux (kubuntu 7.04).
How about the kubuntu 7.10 release? why it does not work?
Thank you,
Step
Exellent “walktrough” Thanks alot!!
Great guide, install went fine but unable to get parallels tools to install. I have the same problem as mark s:
sudo sh /cdrom/parallels-tools.run
gives
sh: Can?t open parallels-tools.run
I can see the cdrom in the file browser and terminal but it just wont install. Sounds like it suddenly worked for mark but not for me. Also 1024×768 is highest res available. If anyone has ideas that would be great.
Wow, I was up late trying to get parallels tools installed (see last comment) and I left ubuntu running on my macbook with firefox open. I slept in this morning and when I woke up my girlfriend was using the macbook, still running ubuntu. I said, “oh your using linux, what do you think?” and her response was “Am I?”. She didn’t even realise it wasnt OS X. I’m not making this up.
Brett try sudo sh /cdrom/parallels-tools.run
@ Michael, I’m having the same problem. I haven’t found any solution to it yet - any suggestions from others?
i also face the same mentioned problem with installing parallels TOOLS:
kailash@kailash-laptop:~$ sudo sh /cdrom/parallels-tools.run
[sudo] password for kailash:
sh: Can’t open cdrom/parallels-tools.run
kailash@kailash-laptop:~$
any help? pls reply to kailashamrit@gmx.net
SOLVED PROBLEM:
no.15 of the given instructions above is the solution of the problem. after doing so i could easily install parallels tools…
Bad luck with Ubuntu 7.10 i386 installs with Parallels 3.0.
At first I picked the Linux/ubuntu option with 1gb of ram and 16mb video. The install would freeze while loading the cupsd file. I get this regardless of live or text install mode.
512ram with 4mb of video:
Receives “The display server has been shut down about 6 times in the last 90 seconds” error. Never fixes it self. I get this regardless of live or text install mode.
1gb ram with 16mb of video and amd64 version of ubuntu:
Receives “Your cpu does not support long mode” error. I find it odd since on the ubuntu site, it says to pick that version if you have an intel pc. I get this regardless of live or safe mode.
1gb ram with 16mb of video and i386 alternate version of ubuntu:
Picked text install and success!!
Glad I have Fios to download a new ubuntu OS quickly each time one didnt work or I would have given up a long time ago. I hope this info helps someone.
That will never work. You’ve partitioned the memory!
hi.
when installing tools i get
uncompressing parrallels .. save data bla bla
continue? (yes/no): yes
found xorg version .
installing for xorg.. not found.
and sends me back to the beginning. any ideas ??
After spending about 2 hours trying to solve this problem on my own after running into the same error that everyone else such as:
sudo sh /cdrom/parallels-tools.run
gives
sh: Can?t open parallels-tools.run
My final solution was to not use the Ubuntu Installation CD to access the parellels-tools.run file.
Instead
1. I copied the vmtools-linux.iso file from /Library/Parallels/Tools/vmtools-linux.iso
2. pasted it onto my desktop
3. ran ubuntu in parallels and at the bottom right, I clicked on the CD icon and chose Connect Image. I then selected vmtools-linux.iso
4. restarted ubuntu, and before logging in, I followed these steps
5. Start Ubuntu, wait till X-server starts;
6. Press Ctrl+Alt+Backspace simultaneously;
7. Press Alt+F6;
8. login with your root ID/password
9. Press Control + Option to access mac OS mouse
10. Clicked on Actions > Install Parellels Tools
11. Then I opened the terminal and entered:
cd media/cdrom0/
12. then entered:
sudo sh parellels-tools.run
And then it finally worked. I know there are shortcuts to these steps, but I did it the long way on purpose.
Well, I hope this helps others who haven’t found a solution.
it would help if I spelled Parallels correctly in the file name.
so, be sure to type it out as
sudo sh parallels-tools.run
just a warning to all the Noobs like me out there.
I spent hours on installing everything from 7.04 through 7.10 and everything was working perfectly in Parallels.
But then I had this wonderful idea to upgrade to 8.04 LTS.
NOT A WONDERFUL IDEA
I then suddenly discovered video driver problems and parallels tools just disappeared and I wasn’t able to install them.
So, I’m now having to start all over again with installing 7.04 from the beginning.
Take this lesson learned from me and be sure to find support documents on upgrading to 8.04 before you do it. Because after I did it, I found out that other people were running into this problem.
I did all the steps of installing this via parallels on my Leopard Macbook Pro and then got to the parallels tools step. When it prompts me for my password, I can’t type. I’m not sure if this is just a problem on my computer specifically but no matter what I try it won’t work. Any ideas?
Thanks.
My final solution in the end was to get rid of my Boot Camp partition and then install a free open source PC emulator from Sun Microsystems called Virtual Box http://www.virtualbox.org/ and on that, I installed Ubuntu.
Its useful because I don’t have to reboot my computer in order to use Ubuntu. Plus I can go to full screen mode and it’ll appear as if I’m not using an emulator. The benefits of this is that I can run the latest version of Ubuntu and all of my special function keys work correctly the way they should.
Whoops!, wrong site. o_O
I meant to say that I got rid of Parallels Desktop and then installed the free open source Virtual Box from Sun Microsystems. Its fully operational and has no problems with the latest version of Ubuntu.
Very easy to follow.
Excellent tutorial.
Thank you very much.
Cheers,
Vlado
Sydney, Australia.
thanks a lot, worked fine until end but could not successfully install the parallels tools
thx it is working perfectly but its a bit slow so im ordering the cd and using it on my old toshiba i would have just downloaded it but my toshiba dont have wi-fi so i cant download it on my network
I found the final fix to the xorg problem here:
http://www.macnn.com/articles/08/06/12/parallels.desktop.5608/
Leave a Comment